Post Your Requirement Menu

Welcome User

Other Products / Services

We are leaders in the market for providing best range of desulfurization and denitrization system, Cold Rolling Mill, steel wire rod mill, tmt bar rolling mill and Aluminum Cold Rolling Mill

desulfurization and denitrization system

Fume produced in sintering process enters desulfurize tower through stack flue in the tower, fume firstly take reaction of foam sucking with ca(oh)2 density liquid in the tower, and then react with spraying serous fluid atomized with multi-layer rotary spraying to produce sulfurous acid ca for implement dual converse foam sucking technology which combine foaming sucking technology with spraying atomized suck technology. Fume which is produced in sintering process, and go through sulfuration in the tower, is discharged into atmosphere from newly setup chimney after water-mist is removed from it by demist device. Sulfurous acid ca slurry produced by desulfurater reacting with fume is transferred by liquid discharging pipeline to oxidized system for implementing oxidization out of the tower.

View Complete Details

Cold Rolling Mill

We are offering cold rolling mill. One stands or double stands with reversible rolling or many stands with continuous rolling process. the speed of rolling is arranged from 600-1200mmin, annual production capacity from 150000-250000 tons for one stands, and 300000-1200000tons per year for tandem rolling process.the rolling thickness is from 0.12-2.0mm, and width is from 800-1550mm or more.

View Complete Details

steel wire rod mill

We are offering steel wire rod mill. Ntet company can provide design and supply for annual production capacity of 100, 000 to 600, 000t bar or rebar rolling line and 250, 000 to 800, 000ttpa wire rod rolling line. The bar dia is from 8-80mm max.120mm; wire rod dia. From 5.5-16mm. Rebar with tmt and whole line without twist and free tension rolling. Mill mode adopts advanced level at present in world, automatic cooling bed, etc. Whole line can be automatically controlled. Tet company can undertake above projects for client on epc or eps basis, and also provide best service for client.

View Complete Details

tmt bar rolling mill

We are offering tmt bar rolling mill. The company can provide design and supply for annual production capacity of 100, 000 to 600, 000t bar or rebar rolling line and 250, 000 to 800, 000ttpa wire rod rolling line. The bar dia is from 8-80mm max.120mm; wire rod dia. From 5.5-16mm. Rebar with tmt and whole line without twist and free tension rolling. Mill mode adopts advanced level at present in world, automatic cooling bed, etc. Whole line can be automatically controlled. Ntet company can undertake above projects for client on epc or eps basis, and also provide best service for client.

View Complete Details

Aluminum Cold Rolling Mill

We are offering aluminum cold rolling mill. Aluminum cold rolling mill with one stand reversible rolling process or non-reversible rolling process and also several rolling mills for continuous rolling process. Which adopts more advanced technology such as agc , afc, that can guarantee very accurate of thickness and flatness on surface. Width and thickness can be decided by client, we can make desing and manufacture and supply accordingly.

View Complete Details

Electric Arc Furnace

We offer electric arc furnace or bof for steelmaking can be used for steelmaking to produce hot steel metal for continuous casting machine by scrap or liquid metal from blast furnace. Lf, vd, vod, aod which is used for secondary refining to produce high quality steel product like common carbon structure steel, alloy steel etc. We can provide most recent technology and equipment for client on eps or epc basis as per requirement of client.

View Complete Details

Strip Rolling Mill

We are offering hot plate, strip rolling mill. Hot plate or strip rolling mill is used for rolling medium and heavy plant or strip which can be produced by one stand with reversible rolling or tandem rolling mills to form annuall production capacity from 150000-3000000tons plate or strip. Thickness of medium and heavy plate is ranged from 20-120mm, and the thickness of strip is ranged from 1.5mm-10mm, width for strip is from 750mm-1780 mm and for plate from 800-4500mm. We can design and manufacture as well as supply them on epc or eps basis as per requirement of client.

View Complete Details

Aluminum Caster

We are offering aluminum caster, steel caster. Aluminum caster is used for directly producing aluminum strip coil by using liquid aluminum. With different wide and thickness, with most technology in world which widely is used in domestic and abroud. We can design and manufacture as well as supply as per requirement of client.

View Complete Details

aluminum foil rolling mill

aluminum foil rolling mill is for rolling more thin aluminum foil coil which is widely used for electrical and packing etc. field. we can provide design and manufacture and supply this rolling mill on epc or eps basis as per requirement of client .

View Complete Details

acid regeneration plant

This is acid regeneration plant which is widely used for waste acid recovered process, it can save 99% HCL acid fore reused and also can produce product-by such as iron power and low silicon iron power which can is used for producing middle or high degree magnetic material. this technology is most advanced one due to many improvement had been made on original technology of western nation basis through nearly 30year production verification with very efficiency and economical for pickling producton. we can make design and manufacture, supply as per requirement of client. with different capacity production.

View Complete Details

Pickling Line

We are offering pickling line. There are two kinds of pickling lines, one of them is push-pull pickling type and other is continuous pickling type which is satisfy for different production capacity respectively , push -pull type is for annual production below 800000tons, and continuous type for annual capacity of more than 800000tons. It adopts advanced technology in world such as shadow shute, turbulent, with hcl acid.we can design and maufacture as well as supply on eps or eps basis as per requirement of client.

View Complete Details

Galvanizing Line

We are offering galvanizing line. Galvanizing line is widely used for producing different resisting-corrosion ability galvanied strip with modern uion method that adopts the pretreatment of cleaning and annealing furnace and alloying treat if required and surface treatment of tension free process etc. With zinc plated or zinc-aluminum plated by hot dip galvanizing method or by cold electric plating with different thickness on surface of strip and has different ability of corrosion-resisting. Thickness of strip will be from 0.12-1.5mm and width will be from 750-1250mm, we can design and manufacture as well as supply them on epc or eps basis.

View Complete Details

Color Coating Line

We are offering color coating line. Color coating line with 2 coating and 2 baking or 3 coating and 3 baking as well as different processes after coating for producing different products as used like building color plate, decoration plate, homeappliance plate, furnture plate etc. Incoming material is galvanizing coil. We can design and manufacture as well as supply them on epc or eps basis as per requirement of client.

View Complete Details

Blast Furnace

We are offering blast furnace. Blast furnace is used for producing iron ingot or liquid iron which can supply for bof of steelmaking as incoming material. We can produce most advanced bf with bell-less type charging system, as well as pci and trt, diry -wet method dedusting system, top combustion type or enternal or internal combustion type hot blast stove. The volume of bf will be from 220m3-4000m3, we can desing and manufacutre as well as supply them on epc or eps basis.

View Complete Details

LD slag granulated system

Our company has made 3 times technological innovation in steel slag comprehensive utilization for 20 years, got " melton steel slag self-disintegrating in steam process and metal recycling technology" , completely solved the "zero emissions" and steel slag utilization problems. It has made a significant contribution on the rate of comprehensive utilization of steel slag from 10% to 21% during twelfth 5-year plan-thirteenth 5-year plan.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • David Zhao
  • 5 Floor, No.6 Building ,Hanwei international Plaza, East Road , 18area, Headquarters Base, Fengtai District Beijing China, China