Other Products / Services #36100

The Rapid Heat 35 System has a choice of four programmes Pre-Heat, Bake-Out, P.W.H.T. and Custom. In the programme you can set the target temperature, soak timetemperature, cool down temperaturerate deghr, ramp rate deghr, etc. The Rapid 35 controller will then monitor the attached thermocouples to ensure that the heating and cooling rates are not violated during the procedure.

EWAC Placut 80 D is state of the art digital Plasma Cutting Machine provided with the latest primary switched power electronic and controls. The features are -IGBT Semi conductor Power blocks for reliable performance in Hand and Mechanised cutting.- Stable cutting process because of the line fluctuation compensation.- 100% Duty cycle at maximum current- Higher flexibility through the low weight of only 59 kgs- Easy operation because of.The EWAC Placut 80 D delivers excellent quality properties at high productivity in a wide range of thickness and at various metallic materials including galvanized steel plates.

The Rapid Heat 35 System has a choice of four programmes Pre-Heat, Bake-Out, P.W.H.T. and Custom. In the programme you can set the target temperature, soak timetemperature, cool down temperature rate deghr, ramp rate deghr, etc. The Rapid 35 controller will then monitor the attached thermocouples to ensure that the heating and cooling rates are not violated during the procedure.

Tube expansion system, Our New Model Push & Pull K50-600 Pneumatic Rolling Motor has been specifically engineered to ensure uniform tube to tube sheet expansions, thereby preventing the under and over rolling of tubes. This pneumatic tool features an aluminum body, weighing in at only 10.5 lbs (4.76 Kgs) with an ergonomically correct pushpull Throttle. Automatically Stops Tube expansion at defined settings.

Oxy- 70 is a sturdy yet Portable 0xy Fuel Plates Cutting Machine. It is designed for Clean and Accurate cutting of Mild and Low Alloy Carbon Steel. It is Easy to Operate and is best suited for Straight line, Bevel and Circular Cuttings.Oxy 70 means maximum 70mm thickness capacity, the machine can cut Straight Line cuts upto 1.8 Mtrs length or multiples, can cut Circles from 75mm to 1200mm diameters, Bevels from 0 to 45 degrees.The Machine traverses on an Aluminum Rail for Straight Cutting and cuts circle with a circle cutting attachment.The speed of Oxy- 70 can be set instantly by an indexed speed selector knob .Its forwardoffreverse switch is located just below the speed control knob for easy and quick operation. The speed of the machine can be varied from 80 to 800 mmmin to suit the nature of cutting.The Machine can be supplied with Injector Mix or Nozzle Mix or Victor compatible Torch .The Machine can be supplied with or without Mechanical Clutch.SEC also has models to cut thicker plates like Oxy 150 , Oxy 200 , Oxy 300.

These saw blades and bevel cutters are especially designed for our pipe cutters for highest requirements and longest service life. 4 different ranges of swa blades are available.

We have gained expertise in delivering a quality range of Electrode Holders. The offered products are manufactured by our expert professionals using superior quality raw material, which is procured from the most reliable vendors of the market. Available in different specifications, these Electrode Holders are appreciated in the market for their attributes like fine finish, perfect design and compact size. We assure t deliver the entire range at clients premises within the desired time-frame.

Sigma Galaxy - simplicity and state-of-the-art technology. Sigma Galaxy is the result of new giant leaps in welding technology. Developed in co-operation with universities and users throughout the world, this high-technology welding machine in a self-explanatory industrial design optimizes itself and allows the welder to focus on good workmanship.

Orbital welding equipment, Plasma cutters - Kjellberg can be integrated with Steeltailor to realize high effective cutting. Kjellberg 's Cutfire50i, Cutfire90i, Cutfire100i Cutfire120i are very good choices.

Plasma cutters - Kjellberg can be integrated with Steeltailor to realize high effective cutting. Kjellberg 's Cutfire50i, Cutfire90i, Cutfire100i Cutfire120i are very good choices.

We are one of the leading firms engaged in providing a wide range of Welding Cables and Cables Kits. These cables offered by us are used for various connection processes in the industry. Made using premium quality wires these cables are provided with a rubber coating for proper insulation. Before dispatch, the final range is stored in our capacious and well-maintained warehousing unit in a safe and efficient manner. Clients can avail, these in various specifications as per their needs.

Our domain expertise has enabled us to come up with an excellent collection of Cable Connections. Designed by our expert professionals using premium quality raw material, these connectors are used for connecting one or more cable to each other. Further, these are provided with an excellent rubber coating, these are able to withstand extreme weather conditions. The range of Cable Connections offered by our organization is demanded in the market for their compact design and perfect finish.

With the help of our experienced engineers, we are able to design and develop Cable Lugs And Splicers. These products acclaimed in the market for their attributes like sturdy construction, noise-free operation and low maintenance. The offered machines are suitable for various welding applications. To meet the variegated needs of our clients, these products are available in different sizes and specifications as per their needs.

We have established ourselves as a renowned manufacturer and supplier of Earth ClampsGround Clamps. The offered range is manufactured using premium quality raw material, which is obtained from the trusted and reliable vendors of the market. Our quality experts test the finished range on various parameters to make sure a perfect range is delivered to clients. Owing to our vast distribution network, we have been able to serve the interests of numerous patrons situated across the globe.

Main base frames are fabricated and stress relieved before machining. There are basically two units, the Drive and Idler - one unit each. The precisely machined (on boring machine) Roller Brackets are bolted on the roller beds. Both the Roller Brackets have to be manually moved as per the job diameter keeping the job center fixed. This model has double ended drive to avoid use of intermediate drive shaft. The fixing holes for the brackets on the bed are precisely factory set.

These general purpose single stage regulators are recommencded for inert and non-corrosive gas applications where precise control of delivery pressure is not necessary.They are well suited.