Mekaster Paving Equipments fulfills the needs of Construction Industry for fast, efficient and smooth Paving operations. Address's today's demand for better paving, finishing, higher output, lower costs, higher quality standards, and longer life span. For new construction and overlay paving, using low slump and latex mixes. Offers paving techniques and concrete paving machines, that suits requirement of every client. Work hand in hand with their clients and provides prompt Technical Assistance, Product Training, After Sales & Service. Have pioneered and set standards in mechanized paving India, incorporating customized design and engineering for manufacture of equipment most suited for various applications.

Mekaster has developed a unique system for excavation of Shafts in underground construction & mining application.

BOTTOM UPWARDS

Irrespective of the application whether in underground Construction or Mining, Shaft Raising Platform, provides for easy, safe & fast access to excavate shafts/raises in various rock strata's. This extremely versatile & robust system offers solution for achieving a range of inclinations & cross sections. The shaft raising platform is deployed at the bottom of the shaft & works upwards. It can be used for excavation of shafts between two levels or simply blind raising, if required. ECONOMY - LOWER INVESTMENT & OPERATING COSTS Shaft raising provides for minimal preparation time needed before actual excavation of the shaft. It also provides for saving in cost in terms of safety, time, speed & accuacy. The operating cost is far lower than any other method used for shaft excavation. The actual saving in cost will depend on the length, diameter & inclination of the shaft. The most important advantage of this system is that it allows the excavated material to fall freely to the bottom of the shaft from where it can be easily removed without involving additional machinery, thus saving costs.

Uses
Thanks to its simple and rigid construction, the Aliva 302 is very suitable for mounting onto different types of carriers.

Hydraulic SystemMotor Output 5.5 KWVoltages 400 V 50/HzProtection IP 43Oil Pressure 180 bar

Product Description
The appropriately sized dosing unit Aliva 403 for Liquid accelerators enables an infinite setting of accelerator.

UsesThe Unit is equipped with a simple control which is done entirely on the dosing unit itself, i.e. the amount off additive is set manually by means of the dosing knob.

DriveMotor Output 0.75 KWVoltage 400 V 50 HZ

Theoretical ConveyingConveying output 24-240 I/hOutput Pressure max. 7 bar

The Aliva 263i is a very sturdily constructed two-axle shotcreting machine for the processing of wet or dry mixes, The Working of the shotcreting machines is based on the rotor principle.The concrete mix is transported by thin stream method (compressed air stream) to the spraying nozzle.Automatic lubrication of sealing plates reduce wear and abrasion and thus maintenance costs.

ConfigurationSimple but multi functional

DescriptionThe Aliva 263i is a very sturdily constructed two-axle shotcreting machine for the processing of wet or dry mixes

Working PrincipleThe Working of the shotcreting machines is based on the rotor principle.The concrete mix is transported by thin stream method (compressed air stream) to the spraying nozzle.

Gasket Plate LubricationAutomatic lubrication of sealing plates reduce wear and abrasion and thus maintenance costs.

Original AccessoriesA large number of well matched accessories allow maximum machine output with high-quality results.

Theoretical PerformancesRotor Volume: 10 / 16 / 25 litresOutput: 10-15m3/h

A full range of Hany ZMP grout pumps covers almost every grouting requirement. These low-wear plunger type pumps handle a wide variety of grout mixes from neat cement suspensions to backfill mortar with sand of up to 8 mm particle sizes. All pumps are equipped with the automatic pressure control system (APC).With this system, the maximum pumping pressure can be preset on the hydraulic power pack. Whenever the preset pressure is reached, the pump automatically adjusts its output according to the grout take of the ground.Whenever the grout take ceases, the pump stops and maintains the pressure. The pumping rate can also be adjusted to meet the requirements of the particular ground conditions. The ZMP 700 series can be equipped with different plunger units to cover a wide range of pumping pressures and capacities.

Grouting was for a long time considered to be an art rather than a science. Much of that had to do with little knowledge of the reaction of the grout in the ground and the lack of modern 'State of the Art' equipment. With the recent developments in both, equipment and materials grouting is now more and more accepted as an efficient method for the treatment of soil and rock formations. Hence, choosing the right equipment is of the utmost importance, which Mekaster is now providing.

MEKASTERhas commenced manufacture/assembly of a range of Grouting Systems, under Licence from world renownedHANY AG*, Switzerland. Grouting was for a long time considered to be an art rather than a science. Much of that had to do with little knowledge of the reaction of the grout in the ground and the lack of modern 'State of the Art' equipment. With the recent developments in both, equipment and materials grouting is now more and more accepted as an efficient method for the treatment of soil and rock formations. Hence, choosing the right equipment is of the utmost importance, which Mekaster is now providing.

Mekaster Paving Equipments fulfills the needs of Construction Industry for fast, efficient and smooth Paving operations. Address's today's demand for better paving, finishing, higher output, lower costs, higher quality standards, and longer life span. For new construction and overlay paving, using low slump and latex mixes. Offers paving techniques and concrete paving machines, that suits requirement of every client. Work hand in hand with their clients and provides prompt Technical Assistance, Product Training, After Sales & Service. Have pioneered and set standards in mechanized paving India, incorporating customized design and engineering for manufacture of equipment most suited for various applications. APPLICATION AREAS Canal Lining Airport Runways And Taxiways Concrete Roads, Bridge Decks, Side Walks Cargo Handling Areas, Railway Platforms, Dock Areas, Floors For Waste Treatment Plants, Paving & Finishing Floors For Industrial Buildings.

An Elevating Platform is a mechanical device used to provide temporary access for people or equipment to inaccessible areas, usually at height. They are generally used for temporary, flexible access purposes such as maintenance and construction work or by firefighters for emergency access, which distinguishes them from permanent access equipment such as elevators. They are designed to lift limited weights, distinguishing them from most types of cranes. They are usually capable of being fully operated (including setup) by a single person.

A full range of Hany ZMP grout pumps covers almost every grouting requirement. These low-wear plunger type pumps handle a wide variety of grout mixes from neat cement suspensions to backfill mortar with sand of up to 8 mm particle sizes. All pumps are equipped with the automatic pressure control system (APC).
With this system, the maximum pumping pressure can be preset on the hydraulic power pack. Whenever the preset pressure is reached, the pump automatically adjusts its output according to the grout take of the ground.

Whenever the grout take ceases, the pump stops and maintains the pressure. The pumping rate can also be adjusted to meet the requirements of the particular ground conditions. The ZMP 700 series can be equipped with different plunger units to cover a wide range of pumping pressures and capacities.

The HCM line of highshear (colloidal) mixers is recognized worldwide for its excellent mixing performance, efficiency and wear resistance. The HCM mixers will mix water with bentonite, cement, ultra-fine cement and other similar suspensions effectively. Sands up to 8 mm particle sizes can even be added on the smaller HCM 300. The mixers can be equipped with a weigh-batching system to automatically batch and mix up to three dry ingredients and three chemical additives with water.

The INJECTO-COMPACT (IC) grout plants consist of an HCM mixer, an HRW agitator and a ZMP grout pump. All components are functionally arranged on a common base with a central lifting point. The use of the INJECTO-COMPACT grout plants reduce considerably the installation time on site and minimises operating personnel.

The INJECTO-COMPACT (IC) 310/325 are suitable for grouting tie-back anchors, rock bolts, soil nails, tension cables as well as for tube--manchette and rock grouting. In microtunnelling, these compact plants are used to mix and inject bentonite suspensions.