Mekaster Engineering Ltd.

Kasturba Gandhi Marg, Delhi

Mekaster Paving Equipments fulfills the needs of Construction Industry for fast, efficient and smooth Paving operations. Address's today's demand for better paving, finishing, higher output, lower costs, higher quality standards, and longer life span. For new construction and overlay paving, using low slump and latex mixes. Offers paving techniques and concrete paving machines, that suits requirement of every client. Work hand in hand with their clients and provides prompt Technical Assistance, Product Training, After Sales & Service. Have pioneered and set standards in mechanized paving India, incorporating customized design and engineering for manufacture of equipment most suited for various applications.

A full range of Hany ZMP grout pumps covers almost every grouting requirement. These low-wear plunger type pumps handle a wide variety of grout mixes from neat cement suspensions to backfill mortar with sand of up to 8 mm particle sizes. All pumps are equipped with the automatic pressure control system (APC).
With this system, the maximum pumping pressure can be preset on the hydraulic power pack. Whenever the preset pressure is reached, the pump automatically adjusts its output according to the grout take of the ground.

Whenever the grout take ceases, the pump stops and maintains the pressure. The pumping rate can also be adjusted to meet the requirements of the particular ground conditions. The ZMP 700 series can be equipped with different plunger units to cover a wide range of pumping pressures and capacities.

Product Description
The appropriately sized dosing unit Aliva 403 for Liquid accelerators enables an infinite setting of accelerator.

UsesThe Unit is equipped with a simple control which is done entirely on the dosing unit itself, i.e. the amount off additive is set manually by means of the dosing knob.

DriveMotor Output 0.75 KWVoltage 400 V 50 HZ

Theoretical ConveyingConveying output 24-240 I/hOutput Pressure max. 7 bar

The Aliva 263i is a very sturdily constructed two-axle shotcreting machine for the processing of wet or dry mixes, The Working of the shotcreting machines is based on the rotor principle.The concrete mix is transported by thin stream method (compressed air stream) to the spraying nozzle.Automatic lubrication of sealing plates reduce wear and abrasion and thus maintenance costs.

A full range of Hany ZMP grout pumps covers almost every grouting requirement. These low-wear plunger type pumps handle a wide variety of grout mixes from neat cement suspensions to backfill mortar with sand of up to 8 mm particle sizes. All pumps are equipped with the automatic pressure control system (APC).With this system, the maximum pumping pressure can be preset on the hydraulic power pack. Whenever the preset pressure is reached, the pump automatically adjusts its output according to the grout take of the ground.Whenever the grout take ceases, the pump stops and maintains the pressure. The pumping rate can also be adjusted to meet the requirements of the particular ground conditions. The ZMP 700 series can be equipped with different plunger units to cover a wide range of pumping pressures and capacities.

Grouting was for a long time considered to be an art rather than a science. Much of that had to do with little knowledge of the reaction of the grout in the ground and the lack of modern 'State of the Art' equipment. With the recent developments in both, equipment and materials grouting is now more and more accepted as an efficient method for the treatment of soil and rock formations. Hence, choosing the right equipment is of the utmost importance, which Mekaster is now providing.

Mekaster Paving Equipments fulfills the needs of Construction Industry for fast, efficient and smooth Paving operations. Address's today's demand for better paving, finishing, higher output, lower costs, higher quality standards, and longer life span. For new construction and overlay paving, using low slump and latex mixes. Offers paving techniques and concrete paving machines, that suits requirement of every client. Work hand in hand with their clients and provides prompt Technical Assistance, Product Training, After Sales & Service. Have pioneered and set standards in mechanized paving India, incorporating customized design and engineering for manufacture of equipment most suited for various applications. APPLICATION AREAS Canal Lining Airport Runways And Taxiways Concrete Roads, Bridge Decks, Side Walks Cargo Handling Areas, Railway Platforms, Dock Areas, Floors For Waste Treatment Plants, Paving & Finishing Floors For Industrial Buildings.

An Elevating Platform is a mechanical device used to provide temporary access for people or equipment to inaccessible areas, usually at height. They are generally used for temporary, flexible access purposes such as maintenance and construction work or by firefighters for emergency access, which distinguishes them from permanent access equipment such as elevators. They are designed to lift limited weights, distinguishing them from most types of cranes. They are usually capable of being fully operated (including setup) by a single person.

Versatile, Light Weight, Durable Concrete Finishes To Fine Tolerences With Multi Application Capabilities, Even On 1:1

The Rack & Pinion system is a simple system with 100 % efficiency to provide precise and positive control and operation for vertical transportation of men and material to a unlimited height. This is due to its unique modular range, in which fully tried and tested components can be combined to tailor exactly the right configuration to meet customers requirements, thereby combining the best value for money with safety in operation. Each and every Rack segment and Pinion is carefully machined to produce the highest quality components required for safe and positive operation.

Started from 400 kg pay load capacity suitable for inspection and maintainance of all industrial structures. By virtue of its inherent advantages and Safety features the Rack & Pinion Elevators are widely used in the industry and are best suited for all types of industrial applications which includes:

1. Chimney

2. Coal Handling Plant [CHP]

3. TV TOWER

4. Port & Cranes

5. Preheater

6. Silo

7. Special Applicatio

Stated from 1000 kg pay load capacity suitable for Construction purpose. By virtue of its inherent advantages and Safety features the Rack & Pinion Elevators are widely used in the industry and are best suited for all types of industrial applications which includes:

1. Building

2. Boiler

3.Bridge Pylon

The INJECTO-COMPACT (IC) grout plants consist of an HCM mixer, an HRW agitator and a ZMP grout pump. All components are functionally arranged on a common base with a central lifting point. The use of the INJECTO-COMPACT grout plants reduce considerably the installation time on site and minimises operating personnel.

The INJECTO-COMPACT (IC) 310/325 are suitable for grouting tie-back anchors, rock bolts, soil nails, tension cables as well as for tube--manchette and rock grouting. In microtunnelling, these compact plants are used to mix and inject bentonite suspensions.

The HCM line of highshear (colloidal) mixers is recognized worldwide for its excellent mixing performance, efficiency and wear resistance. The HCM mixers will mix water with bentonite, cement, ultra-fine cement and other similar suspensions effectively. Sands up to 8 mm particle sizes can even be added on the smaller HCM 300. The mixers can be equipped with a weigh-batching system to automatically batch and mix up to three dry ingredients and three chemical additives with water.