Mellcon Compressed Air and Gas Filters being manufactured are best Tested for simultaneous mechanical separation of liquid droplets and of solid dust from compressed gases. Tested with oil mist, these filters will have to be followed by adsorber units which have the double function of removing the remaining mist particles and of adsorbing the dissolved gases and vapours. Such "Adsorbers" contain granular adsorption media, usually activated carbon or silica gel. The granules nearer to depth filter and liquid mist particles, meanwhile the farther granules adsorb the dissolved vapours. Working pressure : 10 kgcm2. Material : Carbon Steel. Finish : Inside black bituminious paint. Flanges according to ASA-150 RT Ceramic filter cylinders of grain size 120. All sizes are supplied with separately packed carbon except the In-Line Adsorber, which is supplied with filled-in carbon.

We offer Hot Air Blowing Equipment.Mellcon Engineers are specialized manufacturers of Industrial Hot Air Blowers & Air Heaters equipments for Bus Ducts dehydration & moisture removal technology during long shut down periods. We have supplied large number of Hot Air Blowing Equipments to various projects e.g. Neyveli Lignite Corporation, NALCO Angul, GMDC Ahmedabad, NTPC Rihand, Panipat Thermal Project, DVC Mejia, Pendent Cement Bhutan etc. Inspection was carried by leading consultants like MECON, M.N Dastur, DCL, Desein, Tata Projects etc. Mellcon make Hot Air blowing Heaters are equipped with Digital Temperature Indicating Controller (TIC), Blind Temperature Controller (BTC). TIC and BTC are having individual set points, by which the temperature of the Air Heater can be controlled. Set temperature of TIC is at outlet temperature can b maintained as required, So that this will maintain the temperature of heater at this temperature by energizing & de energizing the Heater according to the temperature. BTC which is provided as extra safety device is set at 10 degree C above desired outlet temperature.This will cut off the heater if the temperature increases more than its set temperature and alert the operator by an audio alarm so that the temperature will not increase beyond control.

Ellcon offers fully automatic and effective ready to use effecient refrigerant recovery system with power range from 120 watts to 1200 watts. It has a volumetric capacity range from 4-6kghr to 40-45kghr. To start the unit connect the service hose to the lower side of the refrigeration system and press the start button. The unit will start operating and the refrigerant gas gets extracted and distilled. It will turn off automatically after all the gas is removed. It will pull a 10 degree vacuum and if a positive pressure is sensed the unit will start automatically.

Mellcon dew point apparatus is the most economical, simple, errorless system for the spot checking of dew point temperature of any compressed air gases. This consists of a closed cylindrical glass with two chrome plated tubes, a low range thermometer (-50+40 deg.c) and a dry ice maker.Air gas enters to cylindrical glass through one chrome plated tube and exhausts. The other chrome plated tube is centrally placed in the cylindrical glass and thermometer is placed in it. Make dry ice (solid c02 ) with the help of dry ice maker & a co2 gas cylinder. Pour some ether acetone in the chrome plated tube having thermometer, and slowly put dry ice pieces into this liquid to reduce the wall temperature of the chrome plated tube. At a particular temperature the dew frost will start forming on the walls of the tube and the same temperature can be noted from the thermometer. This is the dew point temperature of that particular air gas.

We are offering auto drain trap.Mellcon auto drains are most economical, simple & maintenance free systems. The compressed air gas contains inherent moisture which will condense in receiver tanks, filters and pipelines, which requires regular draining systems. Auto drains are available in two options namely:1) electronic timer drain.2) level based zero loss condensate drain