Mumbai, Maharashtra, India
Our Products
Hastelloy Heat Exchanger Tube Plugsseal the ends of leaking tubes, providing longer use of the heat exchanger. The uniform taper and the smooth surface finish assure positive sealing with minimum installation force. The one-piece design of the pin plug provides an easy solution to permanent plugging for tubes or tubesheet holes.
METALOK is manufacturer of Heat Exchanger Tube Plugs, HastelloyBoiler Tube Plugs, Condenser Tube Plugging, Metal Tapered Tube Plugs Hastelloy, Condenser Plugs for Heat Exchanger
Unique Advantage ofHastelloy Heat Exchanger Tube Plugs1) Special materials and sizes can be custom manufactured
2) Can be machined to your drawing specifications.
ApplicationFor permanent plugging of condenser and heat exchanger tubes and tubesheet holes. Can be used in some high temperature/pressure heat exchangers. Tube plugs driven into leaking tubes just before heat exchanger goes back into operation.
METALOK is the manufacturer of PTFE Union Tee which is a type of PTFE Tube Compression Fittings . PTFE Union Tee tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.
PTFE Union Teeare available in 1/8 OD Tube , 1/4 OD Tube , 3/8 OD Tube , 1/2 OD Tube . They are also available in metric system from size 4mm OD Tube , 6mm OD Tube , 8 mm OD Tube , 10 mm OD Tube , 12 mm OD Tube.
| IMPERIAL | ||||||
| PART No. | 0D1 Imperial | 0D | F Hex | A Inch | L Inch | H mm |
| MICF/UT/1 I | 1/16 | 0.05 | 1/2 | 0.34 | 1.40 | 14.00 |
| MICF/UT/2 I | 1/8 | 0.09 | 1/2 | 0.50 | 1.76 | 15.74 |
| MICF/UT/3I | 3/16 | 0.12 | 1/2 | 0.54 | 1.92 | 17.78 |
| MICF/UT/4 I | 1/4 | 0.19 | 1/2 | 0.60 | 2.12 | 19.55 |
| MICF/UT/5 I | 5/16 | 0.25 | 5/8 | 0.64 | 2.34 | 21.33 |
| MICF/UT/6 I | 3/8 | 028 | 5/8 | 0.66 | 2.40 | 23.11 |
| MICFAJT/8 I | 1/2 | 0.41 | 13/16 | 0.90 | 2.84 | 25.90 |
| MICF/UT/10 I | 5/8 | 0.50 | 1 | 0.96 | 3.06 | 28.70 |
| MICF/UT/12 I | 3/4 | 0.62 | 1-1/16 | 0.96 | 3.14 | 29.71 |
| MICF/UT/14 I | 7/8 | 0.72 | 1-1/4 | 1.02 | 3.52 | 34.54 |
| MICF/UT/16 I | 1 | 0.88 | 1-3/8 | 1.23 | 3.86 | 36.83 |
| MICF/UT/20 I | 1-1/4 | 1.09 | 1-11/16 | 1.62 | 5.34 | 44.50 |
METALOK is the manufacturer of PTFE Bulkhead Union which is a type of PTFE Tube Compression Fittings . PTFE Bulkhead Union tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.
PTFE Bulk head Union with its check nut assist you in mounting .
PTFE Bulk head Union are available in 1/8 OD Tube , 1/4 OD Tube , 3/8 OD Tube , 1/2 OD Tube . They are also available in metric system from size 4mm OD Tube , 6mm OD Tube , 8 mm OD Tube , 10 mm OD Tube , 12 mm OD Tube.
METALOK is the manufacturer of PTFE Male Run Tee which is a type of PTFE Tube Compression Fittings . PTFE Male Run Tee tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.
METALOK is the manufacturer of PTFE Male Elbow which is a type of PTFE Tube Compression Fittings . PTFE (Polytetrafluoroethylene) Male Elbow a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing.
METALOK is the manufacturer of PTFE Male Elbowfor tubes 1/16 , 1/8 1/4 , 3/8 , 1/2 and other sides 1/8 , 1/4, 3/8 , 1/2 NPT Male , BSP Male , Metric Male
METALOK is the manufacturer of PTFE Nut which is a type of PTFE Tube Compression Fittings . PTFE (Polytetrafluoroethylene) Nut a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing.
