Post Buy Requirement
MN
Madurai, Tamil Nadu, India
Add Review

Testing Services

Radiographic Testing Services

Radiographic testing can detect internal discontinuities such as voids, porosity, inclusions and cracks in piping & structural weldments , pipeline weldments , castings, valves & tubes in a wide range of materials, sizes and shapes. The interpretation of radiographic film of welds requires knowledge of not only welding and welding discontinuities, but also the exercise of good judgment as to whether the discontinuities are actually defects. Radiography technicians have extensive experience in film interpretation at both asnt level ii, asnt level iii

benefits at a view:
inspection of a wide variety of material types with varying density
ability to inspect assembled components
minimum surface preparation required
sensitivity to changes in thickness corrosion
voids
cracks and material density changes
the ability to detect both surface and subsurface defects and the ability to provide a permanent record of the inspection.
Metus ndt services provide complete radiographic services for field applications. The trained certified inspector is able to read and grade the films and then determine if parts are acceptable or rejectable.
View Complete Details

Ultrasonic Testing Services

An ultrasound transducer connected to a ultrasonic machine is put in contact with the object that is being inspected. The end results are the pulse waves that are transmitted through the product. When measured, these can determine imperfections and thicknesses. They can even measure the size of the imperfections or inclusions in a product.

Ultrasonic thickness gauge measurement (utg) are made using pulse-echo technique. This technique determines thickness or reveals corrosion discontinuities/ loss of wall thickness near the surface or deep within components or structures. It offers the advantage of examining components without removal or disassembly.

Our personnel are trained in ultrasonic techniques and are certified to ut level I & ii as per american society for non destructive testing (asnt). They can interpret results on site and give a quick response so that the product can be compared to the given standard and appropriate measures can be taken.

Main uses of ultrasonic testing:
used to locate surface and subsurface defects in many materials like metals.
Finding internal weld imperfection
thickness measurements.
Depth of penetration for flaw detection or measurement is superior to other methods.
One side access is sufficient.
Provides distance information.
Minimum part preparation is required.
Hazardless with high safety.
Benefits at a view:

with ut services from metus ndt services, you can be sure of:
quick and highly accurate inspections
finding any flaws or discontinuities, including extremely small ones, in a product
reduced risk of company liability with documented safety standards
metus ndt services' exclusive one-stop service
View Complete Details

Hardness Testing Services

Hardness is the property of a material that enables it to resist plastic deformation, usually by penetration. However, the term hardness may also refer to resistance to bending, scratching, abrasion or cutting. The usual method to achieve a hardness value is to measure the depth or area of an indentation left by an indenter of a specific shape, with a specific force applied for a specific time. There are three principal standard test methods for expressing the relationship between hardness and the size of the impression; these are brinell, vickers, and rockwell. For practical and calibration reasons, each of these methods is divided into a range of scales, defined by a combination of applied load and indenter geometry.

Metus ndt services provides portable digital hardness testers for quick and convenient on-site hardness testing.

We provide quick and inexpensive testing to determine if:
metals meet required hardness readings for applications
a metal component has been improperly heat treated
pieces do not conform
if pieces do not conform, we sort them for proper conditioning. Parts can be salvaged and brought back into specifications by the proper heat treatment or annealing process.
View Complete Details

Acoustic Emission (ae) Testing

Acoustic emission may be defined as a transient elastic wave generated by the rapid release of energy within a material. Materials "talk" when they are in trouble: with acoustic emission equipment you can "listen" to the sounds of cracks growing, fiber breaking and many other modes of active damage in the stressed material. Small-scale damage is detectable long before failure so, ae can be used as a non-destructive technique to find defects during structural proof tests and plant operation. Ae also offers unique capabilities for materials research and development in the laboratory. Finally, ae equipment is adaptable to many forms of production qc testing, including leak detection.

Some typical applications of the acoustic emission principle in testing materials are as follows:
behaviour of materials such as metals, ceramics, composite, composites, rocks etc.
Crack propagation
yielding
fatigue
corrosion, stress corrosion
creep
fiber fracture, delamination
metus ndt services offers a complete on-site inspection services performed with state-of-the-art computer-based systems by asnt certified operators and technicians. We employ the latest technology software packages available.
Engineering:
our engineering capabilities enable us to thoroughly evaluate various operating conditions to develop an effective use of ae technology. Our broad range of experience enables us to develop specialized test methods, ensure that proper signal detection methods are employed and use appropriate data analysis techniques to locate emission sources and measure their significance relative to the test objective.

Third party inspection:
supervise qaqc tests to your specifications at vendor shops or any site you specify.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ganapathy (Metus Ndt Services)
  • 4-291,College Street, Thasildhar Nagar, Anna Nagar,Madurai, Tamil Nadu - 625020, India
  • Share us via
Service Provider of Testing Services from Madurai, Tamil Nadu by Metus Ndt Services
Post Buy Requirement
MN
Madurai, Tamil Nadu, India
Add Review

Testing Services

Radiographic Testing Services

Radiographic testing can detect internal discontinuities such as voids, porosity, inclusions and cracks in piping & structural weldments , pipeline weldments , castings, valves & tubes in a wide range of materials, sizes and shapes. The interpretation of radiographic film of welds requires knowledge of not only welding and welding discontinuities, but also the exercise of good judgment as to whether the discontinuities are actually defects. Radiography technicians have extensive experience in film interpretation at both asnt level ii, asnt level iii

benefits at a view:
inspection of a wide variety of material types with varying density
ability to inspect assembled components
minimum surface preparation required
sensitivity to changes in thickness corrosion
voids
cracks and material density changes
the ability to detect both surface and subsurface defects and the ability to provide a permanent record of the inspection.
Metus ndt services provide complete radiographic services for field applications. The trained certified inspector is able to read and grade the films and then determine if parts are acceptable or rejectable.
View Complete Details

Ultrasonic Testing Services

An ultrasound transducer connected to a ultrasonic machine is put in contact with the object that is being inspected. The end results are the pulse waves that are transmitted through the product. When measured, these can determine imperfections and thicknesses. They can even measure the size of the imperfections or inclusions in a product.

Ultrasonic thickness gauge measurement (utg) are made using pulse-echo technique. This technique determines thickness or reveals corrosion discontinuities/ loss of wall thickness near the surface or deep within components or structures. It offers the advantage of examining components without removal or disassembly.

Our personnel are trained in ultrasonic techniques and are certified to ut level I & ii as per american society for non destructive testing (asnt). They can interpret results on site and give a quick response so that the product can be compared to the given standard and appropriate measures can be taken.

Main uses of ultrasonic testing:
used to locate surface and subsurface defects in many materials like metals.
Finding internal weld imperfection
thickness measurements.
Depth of penetration for flaw detection or measurement is superior to other methods.
One side access is sufficient.
Provides distance information.
Minimum part preparation is required.
Hazardless with high safety.
Benefits at a view:

with ut services from metus ndt services, you can be sure of:
quick and highly accurate inspections
finding any flaws or discontinuities, including extremely small ones, in a product
reduced risk of company liability with documented safety standards
metus ndt services' exclusive one-stop service
View Complete Details

Hardness Testing Services

Hardness is the property of a material that enables it to resist plastic deformation, usually by penetration. However, the term hardness may also refer to resistance to bending, scratching, abrasion or cutting. The usual method to achieve a hardness value is to measure the depth or area of an indentation left by an indenter of a specific shape, with a specific force applied for a specific time. There are three principal standard test methods for expressing the relationship between hardness and the size of the impression; these are brinell, vickers, and rockwell. For practical and calibration reasons, each of these methods is divided into a range of scales, defined by a combination of applied load and indenter geometry.

Metus ndt services provides portable digital hardness testers for quick and convenient on-site hardness testing.

We provide quick and inexpensive testing to determine if:
metals meet required hardness readings for applications
a metal component has been improperly heat treated
pieces do not conform
if pieces do not conform, we sort them for proper conditioning. Parts can be salvaged and brought back into specifications by the proper heat treatment or annealing process.
View Complete Details

Acoustic Emission (ae) Testing

Acoustic emission may be defined as a transient elastic wave generated by the rapid release of energy within a material. Materials "talk" when they are in trouble: with acoustic emission equipment you can "listen" to the sounds of cracks growing, fiber breaking and many other modes of active damage in the stressed material. Small-scale damage is detectable long before failure so, ae can be used as a non-destructive technique to find defects during structural proof tests and plant operation. Ae also offers unique capabilities for materials research and development in the laboratory. Finally, ae equipment is adaptable to many forms of production qc testing, including leak detection.

Some typical applications of the acoustic emission principle in testing materials are as follows:
behaviour of materials such as metals, ceramics, composite, composites, rocks etc.
Crack propagation
yielding
fatigue
corrosion, stress corrosion
creep
fiber fracture, delamination
metus ndt services offers a complete on-site inspection services performed with state-of-the-art computer-based systems by asnt certified operators and technicians. We employ the latest technology software packages available.
Engineering:
our engineering capabilities enable us to thoroughly evaluate various operating conditions to develop an effective use of ae technology. Our broad range of experience enables us to develop specialized test methods, ensure that proper signal detection methods are employed and use appropriate data analysis techniques to locate emission sources and measure their significance relative to the test objective.

Third party inspection:
supervise qaqc tests to your specifications at vendor shops or any site you specify.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ganapathy (Metus Ndt Services)
  • 4-291,College Street, Thasildhar Nagar, Anna Nagar,Madurai, Tamil Nadu - 625020, India
  • Share us via