Our Products
We from house of Bhatt offer you another product for your Regular required of maintenance. This Filter is used for Air, Water, Oil, Environmental, Lequid, Steam & Many more Application.
For your DC Motor & other application we offer panel Air Filter & Filter Elemant.
You just have to send us Details of Motor along with size of Filter, (Length X Width X Thick) Temperature of Air, Filtration micron.
|
We can manufacture any type of Carbon Brush Holder as per your drawing/sample/specification with in short time.
We offer our quality Holders in various materials such as Brass, Gun Metal, Phosphor Bronze, Steet Metal etc.
We carry a large stock of Standard Brush Holders.
We can also manufacture very small quantity of Brush Holders as per your requirement .
slip rings fromsize5/8" to 24", no of rings1 to 28, insulationof epoxy, fibre glass, bakelite up to class "f", ring materialconsist of gun metal, phosphor bronze, stainless steel is available with us.
any type of slipring will be manufacture by us as per your drawing / sample / requirementwith in short span of time.
we offer slip ring for motors, crane duty motor, ac generator, alternators & slip ring application for automation, packaging m/c, radar application, aviation, rotary torch welders, marine application, cable retracting application, cable relling drum, clariflocculator /clarifier application for water treatment plant etc.
if you can describe it, sketch it , we can make it for you.
but if you have an engineering print of it, we can serve you even better.
draft drawing for slipring is available free of cost sand e mail for the same.
To complement our Industrial Product Range of Carbon Brush, Holder, Constant action springs we now also offer Commutator Maintenance Spars.
It is basic requirement that the Commutator is clean & brushes are properly bedded in for proper current flow before the motor is run at full speed.
When replacing carbon brushes it is recommended that you clean the Commutator on the motor armature. This can massively extend the life of the new brushes and makes the motor work more effectively as then the carbons have a better contact with the Commutator itself.
For general cleaning & exclusive carbon removal from Commutator on site we offer you this stick type brushes from the hour of BHATT.
Commutator cleaning stick is used to refresh the surface of the motor Commutator in a machine before the carbon brushes are replaced.
This is a very fine abrasive stick which cleans the Commutator segments without doing any harm to them.
A Gentle Brushing action cleans & polishers & variety of surfaces metallic & non metallic. We just have to put C. C. Stick in the direction of rotation and with medium pressure move left and right to clear to Commutator surface. More details are given in manual of C.C. Stick.
This stick will not contaminate or alter the electrical and mechanical properties of the surfaces cleaned.This Cleaning will not leave any search mark, on Commutator/precious surface like glass/emery paper. Will not reduce /cut size of Commutator/precious surface. It is time saving & safe.
It is designed to reach into the commutator whilst the motor is still in place/onsite. Saving the time needed to remove the motor.
Stick can be fitted in holder to research difficult places. You can clean the Commutator on site.
This stick is available in diameters of 6mm, 12.5mm, 16mm, 19mm, 25mm, and 32mm.Sp. Big size stick can also be made of as per specific requirement for sp. Application.You can use complete length of stick by cutting back protective coating as brush wears.
Stick comes with a manual for your ready reference.
This makes it Ideal for cleaning.
we have already developed 95 type of constant action springs.
anytype/design of constant action spring will be developed for you.
standard springs for brush holders are available ex-stock at most competitive price.
Electrolytic Copper Contacts, Bimetal Contacts, Silver Tipped Contacts. HC Copper Contacts, Copper Tungsten Silver Cadmium Contacts, Flexible Contacts,
Flexible jumpers.
We are manufacturing different types of Electrical Contacts, Silver tip Contacts,
Bimetal Contacts, Contact Block, Sliver Cadmium contacts, Flexible Contacts (Jumper) etc.
We can manufacture any contact as per your requirement within a short period of time.
fix & moving contacts, finger contacts, drum controllers, half round contacts, l type contacts, top & bottom contacts, v bar, oil despot assy, backing spring, no volt coil, catch & lever assly, base plate, lifting rod, insulator, etc for kilburn-mei-easun-gec/ ael- jyoti-compton-advance -bicco-allan west etc.
.Current Collectors - Brush Holder- Gun Metal Pulleys - Contact Block for Cam Controller, Master Controller etc.
we manufacture solenoid coils for solenoid valve, magnetic coil, pull-in-coil and any type of coils as per your sample, drawing and specification.
if you can describe it, sketch it , we can make it for you. But if you have an engineering print of it, we can serve you even better
data sheet for coil is available free of cost sand us e-mail for the same
We can supply any make, type, design of Terminal Plate as per your requirement.
For standard Indian make motors please give motor details.
For obsolete and imported motors please give detail drawing or Burn out sample
we can supply any make, type, design of box as per your requirement.
for standard indian make motors please give motor details.
for obsolete and imported motors please give detail drawing or burn out sample.
in case you want to choose from standard available box please ask us to give draft drawing from which you can select nearest suitable box for you.
We can supply any make, type, design of Fan Cover as per your requirement.
For standard Indian make motors please give motor details.
For obsolete and imported motors please give detail drawing or Burn out sample.
In case you want to choose from standard available fan cover please ask us to give draft drawing from which you can select nearest suitable fan cover for you.
we also have other motor maintenance tools like
bedding store, polishing store, brush setter, commutator stone, slipring resurfacerall available with us on request.
we will be happy to help your for your all motor maintenance requirement.
.we can supply any make, type, design of fan cover as per your requirement.
for standard indian make motors please give motor details.
for obsolete and imported motors please give detail drawing or burn out sample.
in case you want to choose from standard available fan cover please ask us to give draft drawing from which you can select nearest suitable fan cover for you