MITHILA DENTAL LAB

Model Gram, Ludhiana, Punjab

Principles of the System The basic idea is simple: a spring pin which snaps exactly into a conical female. Together, they make up the Ceka Attachment. It was developed 35 years ago as an esthetic–for completely invisible–alternative to the traditional clasp, and ensures stable retention. Once the spring pin “clicks” into the female, the patient knows that the prosthesis is properly seated. Today, each Ceka Attachment is based on the same simple principle. For improved oral hygiene and esthetics, the Ceka Revax was created in both the M3 (standard) and M2 (smaller) versions. Ceka Attachments–whether for partial or full prosthetics, or implantology–allows the dental professional to create a prosthesis whose appearance and function are as true to nature as possible. The Optimum Solution for each Patient Combination work, full dentures, constructions on suprastructures….for almost any indication, there is a Ceka Revax solution. With the same adjustable, removable spring pin and the same precision female. And with a limited number of approved methods which allow each dentist and dental technician to make a success of each Ceka Revax prosthesis. The essence of the Ceka Attachment is its universal application. This design has numerous advantages for the dental technician during the laboratory procedures and for the patient with regard to the ease of insertion or removal. Ceka allows the dentist to facilitate maintenance and repair. The system has three main goals which dental technicians also pursue daily: simplicity, efficiency, and precision. A set of specially designed tools and jigs helps both the dentist and technician produce Ceka Attachment prostheses which meet and exceed today’s demands for function and esthetics. Easy Cleaning The zone surrounding the retentive element is of vital importance to good oral hygiene. It must be free and easy to clean. That is why the Ceka Revax attachment has a “periodontal friendly” female. It starts right underneath the natural contact point of the crown, and makes basal gingival contact. The space between female and crown may still be rinsed, and is easy to clean for patients. More Space for Esthetics The shape and dimensions of a retentive element all too often prevent good esthetics, leading to unaesthetic constructions with oversized crowns. The center of the Ceka Revax female lies exactly in the long axis of the secondary crown. To allow a natural transition to this crown, the female profile is slightly reduced to the buccal. This creates more space for acrylic resin or porcelain veneering. With Ceka Revax, you may always achieve an optimum result.

Porcelain fused to metal crowns (PFM) Mithila Dental Lab provides you with excellent aesthetics PFMs through our 23 years of experience in the field of lab industry.  In depth knowledge, superb customer support and unbeatable price. We at Mithila Dental Lab take pride in delivering consistent quality case after case. Our goal is to ensure that every PFM case you receive from us gives perfect fits and Aesthetics, which in turn will save your valuable chair side time. CAD/CAM PFM is designed through Exocad Designing Software which gives perfect Aesthetics look and perfect fit.

Designed for use with the Success Injection System, Lucitone FRS Flexible Denture Resin is a temporary thermoplastic injectable resin that offers customizable flexibility, high impact resistance and transparency, delivering esthetic removable partial dentures and clear or colored clasps. Lucitone FRS enables dental laboratories to provide a range of flexibility from a firmer more resilient design (1mm thickness) all the way to a super flexible (1.5 mm thickness) partial for an individualized restoration. Features: - Used with the Success Injection System - For esthetic partial dentures and strong nightguards - Offers a range of flexibility, from a firmer more resilient design (2mm) to a super flexible partial (1.5mm) - Semi-crystalline nylon composition for strength, high impact resistance and color stability - Available in 5 shades: Original, Light, Light Reddish Pink, Dark Pink and Clear - Monomer-free - Available in three cartridge sizes: Small, Medium, and Large. Adapts to a laboratory needs. Used with the Success Injection System, Flexible Denture makes esthetic partial dentures and strong nightguards. The material is available in prepackaged cartridges that are heated in the Success Cartridge Furnace, then ready for precision injection.

A cast partial denture consists of a metal framework for retention, combined with tissue colored acrylic and replacement teeth. Partial dentures are used when one or more natural teeth remain in the upper or lower jaw. There are two basic types: FRAMEWORK PARTIAL As compared to conventional acrylic denture, Cast Partial Denture is stronger, more durable and retentive. However, the fabrication of cast partial denture is more costly, time-consuming and complex as compared to the conventional acrylic dentures. Each denture is specifically designed and fabricated to the individual patient. PRECISION ATTACHMENT PARTIALS This is a removable partial denture that is retained by intra-coronal, extra-coronal or stud attachments. This type of precision prosthesis can be tooth supported, tooth and tissue supported, tooth and implant supported or implant and tissue supported. Precision attachment partials are designed in conjunction with new crowns or implants when esthetic expectations, improved retention and stability are required. A precision attachment partial is retained with metal to metal mechanical interlocking parts that are machined or milled to extremely high tolerances.

Mithila Dental System (MDS) is only available in Mithila Dental Lab. It is a latest technology denture of Mithila Dental Lab. Features of MDS Denture - MDS Denture is diifferent from all dentures. - This is made from best quality materials. - This is a best quality denture. - It can easily fit in mouth - On using this denture in mouth patient could never feel any type of problem. - We Mithila Dental Lab providing free complete denture care kit with this denture.

Our laboratory would like to introduce you to one of the best restoratives - GC Initial Zirconia. When nature like aesthetics with superior strength are priority for you and your patient, then just go for GC Initial Zirconia. Why GC Initial Zirconia? - Offer the Superior Strength - Gives nature like Aesthetics - Optimised Composition for higher translucency which is one of the reasons behind excellent aesthetics - High Bending strength & superior wear resistance providing long lasting solution - Synergetic with GC Lustre Pastes to provide excellent customised aesthetics - Cold Isostatic Pressed (CIP) for optimised physical properties  

A zirconia crown is a popular type of all-ceramic crown which is born to improve the appearance of a tooth which has become stained or disfigured over the years. They are durable, easy to wear and long lasting. Difference between Zinconia vs PFM - PFM lacks esthetic look due to its opaque metal layer. A Zirconia Crown can be a best option when one is looking for an aesthetic appearing tooth crown. - Zirconia crown have transparancy as the natural tooth but PFM lacks this feature. There are three advantages which are: - Strength: zirconia crowns last longer than other types of crowns. - Aesthetics: these crowns have an attractive translucent colour which blends in well with the other teeth. - Retain more of the existing tooth: minimal preparation is required which means more of the original tooth is preserved. This is useful if the crown needs to be removed.

Nanofilled light cured protective coating for composite and acrylic indirect restorations. With Optiglaze, GC provides an easy and economical way to get an aesthetic glossy surface similar to a final polish. Instead of time-consuming mechanical polishing it takes only two steps to get a perfect result: apply the coating – light cure – ready! GC’s unique new nano-filler technology for superior wear resistance, a long lasting gloss and high bonding durability! Optiglaze provides an aesthetic glossy surface on artificial teeth, removable dentures, temporary crowns and individual acrylic trays. It can be used in difficult to polish areas such as posterior fissures or interproximal areas of indirect composite restorations. So, instead of mechanical polishing, take the easier option and get a higher quality final gloss with GC Optiglaze. Benefits – time saving – easy handling – perfect aesthetics – long lasting gloss – new nano-filler technology – superior wear resistance – excellent bonding durability – very thin coating layer (25-50 μm) – high discoloration resistance – no influence on restoration colour – perfect in combination with Unifast III