Typical Physio-Chemical Properties

PROPERTY	UNIT	High-Gel
Colour & Appearance	-	White Free Flowing Powder
Bulk Density1,3 Loose Compact*	gm/cc gm/cc	0.16 0.20
Moisture (105oC )2	%	<1.0
Residue on 300 mesh 5	%	<1.0
Melting Point	oC	160±5
Melt Quality	--	Clear & Transparent
Ash content	%	11-13
pH4	---	4.5-5.0

Details

• At the time of packing
• By IR Moisture Balance
• IS: 7589-1974 (A-8)
• IS: 12076-1986(A-2)
• IS: 2850-1983 (A-5.1)

This information and our technical advice-whether verbal, in writing or by way of trials are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sales and Delivery.

Application :

• As an anti-settling agent in paints and inks.
• As a water based proofing agent in tarpaulins.
• As gelling agent in greases

Specifications

Typical Physio-Chemical Properties

PROPERTY	UNIT	High-Gel
Colour & Appearance	-	White Free Flowing Powder
Bulk Density1,3 Loose Compact*	gm/cc gm/cc	0.16 0.20
Moisture (105oC )2	%	<1.0
Residue on 300 mesh 5	%	<1.0
Melting Point	oC	160±5
Melt Quality	--	Clear & Transparent
Ash content	%	11-13
pH4	---	4.5-5.0

Details

• At the time of packing
• By IR Moisture Balance
• IS: 7589-1974 (A-8)
• IS: 12076-1986(A-2)
• IS: 2850-1983 (A-5.1)

This information and our technical advice-whether verbal, in writing or by way of trials are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sales and Delivery.

Application :

• As an anti-settling agent in paints and inks.
• As a water based proofing agent in tarpaulins.
• As gelling agent in greases

Specifications