Our Products #3741460

Two point support. At its mounting point on the wall, Modern Panto-Crane has grip at two different points which provides sturdy and stable grip on the wall. Metal Frame. Made of welded square steel pipes, Modern Panto-Crane frame provides solid support to the Modern Pantograph and light attached to it. Aluminum Track. Aluminum track attached to the lower end of the crane frame provides smooth movement to the rollers on which Modern Pantograph can slide. Horizontal Movement. Modern Panto-Crane provides horizontal movement of up to 180 degrees.Vertical Movement. Modern Pantograph attached to the Modern Panto-Crane can be extended vertically up to 7 feet. This however depends on the size of Modern Pantograph ordered. Extension. Modern Pantograph attached to the Modern Panto-Crane can be extended up to 4.5 feet from the mounted wall.

Manufactured by using German design structure made of solid steel plates to give sufficient mounting pressure. All metallic structure. Sufficient to resist wear and tear due to daily usage. Efficient combination of metal and casting parts to give each component a longer life without maintenance. Sufficiently large pressure beds (made of cast iron) 305 mm X 381 mm. Upper bed contains 4 heating elements made of magnesium foil and tungsten wire which can generate heating temperature up to 110 degree Celsius. Heating elements regulated by a thermostat controller to provide low, medium and high mounting temperature. Pressure bed provided with ball bearing thrust system to ensure effortless operation. Pressure beds coated with stoving color to resist high temperature generated by heating elements. Ply laminated base board provides stability and easy mobility. Usage of state-of-an-art craftsmanship for developing each component providing an export quality finishing.

We offer precision-built enlarger with outstanding features for professional use. - negative sizes: accepts negatives on glass plates and cut films in sizes 8.3 x 10.8 cm (314" x 414"), 6.5 x 9 cm (212" x 312") and 6 x 6 cm (214" x 214"). - lens: 1: 4.5 f135 mm, iris diaphragm with click stops. - focusing: provides trouble-free focusing movement with friction type rollers. Special brass bushings keep the friction and body movement free from damage and ensure long life. - enlarging ranges: with the 4.5135 mm lens, maximum possible enlargement on the baseboard is 5.25 times. Higher magnification can be obtained by projecting on wall or floor. A reduction of 0.88 times can be obtained on the baseboard. - negative carriers: glassless negative carriers provided in three sizes-8.3 x 10.8 cm, 6.5 x 9 cm and 6x6 cm. - illumination: provided with double condensers in mount. Takes screw-type opal lamp of 75 or 100 watts. - lamphouse (enlarging head): the lamphouse assembly consists of two parts made of aluminium. - baseboard: made of fine plywood, well-polished and provided with metal channels at the bottom to prevent possible warping; size 21 x 26". - height: 160 cm when enlarger head is moved to the highest position. - weight: approximately 15.5 kg. - other features: all metal construction * vertical or horizontal projection * smooth up and down movement * red filter * real leather bellows * piano-type switch on baseboard. - finish: pleasing black stove-wrinkle finish and chromium plated parts.

We offer precision-built enlarger with outstanding features for amateur and professional use. - negative sizes: accepts negatives on glass plates, roll or cutfilms in sizes 6.5 x 9 cm (212" x 312"), 6 x 6 cm (214" x 214") and 35 mm. - lens: 1: 4.5 f105 mm, iris diaphragm with click stops. - focusing: provides trouble-free focusing movement with friction type rollers. Special brass bushings keep the friction and body movement free from damage and ensure long life. - enlarging ranges: with the 4.5105 mm lens, maximum possible enlargement on the baseboard is 6 times. Higher magnification can be obtained by projecting on wall or floor. A reduction of 0.71 times can be obtained on the baseboard. - negative carriers: glassless negative carriers in three sizes-6.5 x 9 cm, 6x6 cm and 35 mm. - illumination: double condensers in mount, takes screw-type opal lamp of 75 or 100 watts. - lamphouse (enlarging head): well-ventilated, consists of two parts made of aluminium. - baseboard: made of fine plywood, well-polished and provided with metal channels at the bottom to prevent possible warping; size 20 x 24"- height: 130cm when enlarger head is moved to the highest position. - weight: approximately 12 kg. - other features: all metal construction * vertical or horizontal projection * smooth up and down movement * red filter * real leather bellows * piano-type cord switch. - finish: pleasing black stove-wrinkle finish and chromium plated parts.

We offer precision-built enlarger with outstanding features for professional use. - negative sizes: accepts negatives on glass plates and cut films in sizes 8.3 x 10.8 cm (314" x 414"), 6.5 x 9 cm (212" x 312") and 6 x 6 cm (214" x 214"). - lens: 1: 4.5 f135 mm, iris diaphragm with click stops. - focusing: provides trouble-free focusing movement with friction type rollers. Special brass bushings keep the friction and body movement free from damage and ensure long life. - enlarging ranges: with the 4.5135 mm lens, maximum possible enlargement on the baseboard is 5.25 times. Higher magnification can be obtained by projecting on wall or floor. A reduction of 0.88 times can be obtained on the baseboard. - negative carriers: glassless negative carriers in three sizes-8.3 x 10.8 cm, 6.5 x 9 cm and 6x6 cm. - illumination: provided with double condensers in mount. Takes screw-type opal lamp of 75 or 100 watts. - lamphouse (enlarging head): special type of lamphouse consisting of three parts, the two upper parts being made of cast aluminum alloy. This squirrel-type housing permits sufficient ventilation from both top and sides to guard against abnormal temperature when working continuously. - baseboard: made of fine plywood, well-polished and provided with metal channels at the bottom to prevent possible warping; size 21 x 26". - height: 160cm when enlarger head is moved to highest position. - weight: approximately 18 kg. - other features: all metal construction * vertical or horizontal projection * smooth up and down movement * red filter * real leather bellows * piano-type switch on baseboard. - finish: pleasing black stove-wrinkle finish and chromium plated parts.

We offer precision-built enlarger with outstanding features for amateur and professional use. - negative sizes: accepts negatives on glass plates, roll or cutfilms in sizes 6.5 x 9 cm (212" x 312"), 6 x 6 cm (214" x 214") and 35 mm. - lens: 1: 4.5 f105 mm, iris diaphragm with click stops. - focusing: provides trouble-free focusing movement with friction type rollers. Special brass bushings keep the friction and body movement free from damage and ensure long life. - enlarging ranges: with the 4.5105 mm lens, maximum possible enlargement on the baseboard is 6 times. Higher magnification can be obtained by projecting on wall or floor. A reduction of 0.71 times can be obtained on the baseboard. - negative carriers: glassless negative carriers in three sizes-6.5 x 9 cm, 6 x 6 cm and 35 mm. - illumination: double condensers in mount, takes screw type opal lamp of 75 or 100 watts. - lamphouse (enlarging head): special squirrel-type of lamphouse consisting of three parts, the two upper parts being made of cast aluminum alloy. Permits sufficient ventilation from both top and sides to guard against abnormal temperature when working continuously. - baseboard: made of fine plywood, well-polished and provided with metal channels at the bottom to prevent possible warping; size 20 x 24". - height: 130 cm when enlarger head is moved to the highest position. - weight: approximately 13.5 kg. - other features: all metal construction * vertical or horizontal projection * smooth up and down movement * red filter * real leather bellows* piano-type cord switch. - finish: pleasing black stove-wrinkle finish and chromium plated parts.

We offer precision-built color enlarger with outstanding features for professional use. - negative sizes: accepts negatives on glass plates and cut films in sizes 6.5 x 9 cm (212" x 312"), 6 x 6 cm (214" x 214") and 35 mm. - lens: 1: 4.5 f135 mm, iris diaphragm with click stops. - focusing: provides trouble-free focusing movement with friction type rollers. Special brass bushings keep the friction and body movement free from damage and ensure long life. - enlarging ranges: with the 4.5135 mm lens, maximum possible enlargement on the baseboard is 6 times. Higher magnification can be obtained by projecting on wall or floor. A reduction of 0.8 times can be obtained on the baseboard. - negative carriers: glassless negative carriers provided in three sizes-6.5 x 9 cm, 6x6 cm and 35 mm. - illumination: provided with triple plano-convex type condensers in mount. Takes screw-type opal lamp of 100 or 150 watts. - lamphouse (enlarging head): the lamphouse assembly consists of three parts. Lamphouse base containing condenser is placed above the bellow assembly. Filter drawer, which can take up to 5" x 5" size color glass or gelatin printing filters, is placed above lamphouse base. Lamphouse containing the lamp holder is placed above the filter drawer. - baseboard: made of fine plywood, well-polished and provided with metal channels at the bottom to prevent possible warping; size 24" x 30". - other features: all metal construction * vertical or horizontal projection * smooth up and down movement * red filter * real leather bellows * piano-type switch on baseboard. - finish: pleasing black stove-wrinkle finish and chromium plated parts.

We offer precision-built enlarger with outstanding features for amateur and professional use. - negative sizes: accepts negatives from 16mm x 16mm to 35mm x 35mm size of 110, 126 and 35mm films. - lens: 1: 4.5 f50 mm, iris diaphragm with click stops. - focusing: a smooth focusing movement that keeps the friction and body movement free from damage. - enlarging ranges: with the 450 mm lens, maximum possible enlargement on the baseboard is 10 times. Higher magnification can be obtained by projecting on wall or floor. A reduction of 0.9 times can be obtained on the baseboard. - negative carriers: glassless negative carriers for 24 x 36 mm negative frame. - illumination: double condensers in mount, takes screw-type opal lamp of 75 or 150 watts. - lamphouse (enlarging head): well-ventilated, consists of parts made of aluminum. - baseboard: made of fine plywood, well-polished and provided with metal channels at the bottom to prevent possible warping; size 18 x 24"- height: 125cm when enlarger head is moved to the highest position. - weight: approximately 11.5 kg. - other features: all metal construction * vertical or horizontal projection * smooth up and down movement * red filter * real leather bellows. - finish: pleasing black stove-wrinkle finish and chromium plated parts.

The Modern Field Camera is designed for either indoor or outdoor uses and is an extremely capable and versatile instrument.Rising and falling front each with locking device, rack and pinion focusing extending full length of bed, adjustment from either front or rear sliding block housing tripod socket enables either end of camera to be centered over tripod for panoraming, reversible back for vertical and horizontal pictures device. Extension piece to bed included for use where long bellows extension is required. Focusing screen positioned with flexible spring to enable holder to be inserted and screen displaced in one movement convenient pacing of controls so that they can be operated by right hand when focusing. Soundly made of wrinkle finish color, cast aluminum body, all metal parts of brass with chromium plated finish a sturdy leather case, (included with the camera). All metal body construction, with three metal dark slides, but without carriers and film holder. Focusing:To move the front and back carriages on the monorail.For further fine focusing use back focusing knob.Movements of both lens and film around optical axis.Removable vertical or horizontal, all metal ground glass.Rising and falling each with locking knob device. Swing vertically: Loosen the vertical swing knob and tilt the front and back of camera. Loading the camera:The camera has and improved method of releasing the ground glass frame which makes it possible to remove or insert the film holder without disturbing the camera.Pull out on the frame release handle till it extends at right angles to back and small rollers rest in the depression.See that bottom of holder rest on protruding stops. Release the frame release handle. Long real leather bellows.A pan tilt head with camera complete in sturdy carrying case, without Lens.

We offer view camera includes all the adjustments required in a fine view camera. Generous front and rear lateral shifts and swings can be combined with the vertical tilts to provide the photographer with controls to solve the most difficult photographic problems. conveniently located control and focusing knob makes it a pleasure to use. Everything has been done to make this camera a photographers dream-helpful refinement. Free wheeling on focusing track for quick adjustments, click stops for centering adjustments, vertical or horizontal back position, a pan-tilt head (included with the camera) a sturdy leather case (included with the camera). because of the design and rugged construction of the modern view camera, it can be locked rigidly in any position regardless of the adjustments employed. Thus it is admirably suited to color photography and other exacting types of photography which necessitate the use of a versatile but rigid camera. A generous longer bellows extension. This and many other features including its modest price make the modern view camera the most desirable view camera. All metal body construction, with three wooden dark slides without carriers and film holder. focusing:rack and pinion focusing extending full length of bed. Movements of both lens and film around optical axis. Removable vertical or horizontal, all metal ground glass back. Rising and falling each with locking knob device. swing vertically:loosen the vertical swing knob and tilt the front and back of camera. long real leather bellows. A pan tilt head with camera complete in sturdy carrying case, without lens.

Elegant and Sturdy: Beautifully black powder coated system surely adds a professional look to your studio. At the same time, steel and metal-casted components provide stability and sturdiness to the system that you had always wanted. Easy to use: The system provides precise positioning of lights with ease and speed, eliminating the clutter of light stands and power cables on the floor. It has a lever control that can be operated by one hand to lock the pantograph at all the necessary heights. Smooth sliding on aluminum tracks using fiber rollers makes using the system an enriching experience. More floor space: The system is mounted overhead without blocking your studio floor. This provides enough versatility in use of your studio floor. Ceiling supports and mounting: Ceiling mounting kit provided with the system helps to firmly attach the fixed tracks with the ceiling. The height of mounting can also be lowered by attaching the extension supports. Technical: Can lift weight up to 8Kgs and can extend up to 7.5 feet.

We offer modern manual background support kit is the cost effective, versatile and simple solution for studio background management. with major components crafted from steel and metal-casting, this kit provides smooth operation, elegant look and complete flexibility in managing studio backgrounds.

Two Point Mounting. At its mounting point on the wall, Modern Wall Boom has grip at two different points which provides sturdy and stable grip on the wall. Chrome-plated pipes. All the pipes on Modern Wall-Boom are chrome plated which makes them rust free. Most of other steel components are zinc plated. Aluminum-casted Joints. Both the joints of Modern Wall-Boom are aluminum-casted. This, unlike plastic joints, provides smooth movement on the chrome-plated pipes which lasts for years.Vertical Movement. Modern Wall-Boom provides vertical movement of 150 degrees. Horizontal Movement. Modern Wall-Boom provides horizontal movement of 180 degrees. Extension: Modern Wall-Boom can be extended up to 6 feet. Closed length is 3 feet.