We are offering heat of compression air dryer.
with the assistance of our dexterous team, we are involved in offering an extensive range of heat of compression type air dryers. In these dryers the compressed air is directly taken to air dryer with the inlet using insulated pipelines. This is achieved at the 120o c, which is the minimum temperature. After, which the hot air is passed through one drying vessel where saturated desiccant is regenerated by this hot air. Further, after picking up moisture from desiccant bed, the air is cooled in an intermediate cooler, wherein the moisture is condensed and removed by auto drain valve. As these are cooled to 40oc, this air passes through the second drying vessel, where the balanced moisture gets adsorbed after, which the dry air comes out. The cycle time of this process includes 4 hours regeneration & 4 hours drying. Moreover, after this 4 hours cycle the changeover of vessels takes place automatically. Further, in this regeneration cycle heating of the bed requires only 2 hours, and thereafter the bed is cooled by dry air. Thus, after the bed cooling, the dry air is again cooled to 40oc in another cooler, which is delivered out of unit as dry air at 40o c temp. Salient features no power requirement for regeneration. No loss of compressed air. Maintenance is easy as there are no blower, no heaters, and no moving parts. Maintains desiccant adsorption capacity to give (-) 400c dew point for almost 5 years. Low-pressure drop across the dryer- less than 0. 3kg/cm2. Skid mounted construction on channel base frame. Fully automatic, continuous operation. Negligible operating cost. It neither requires electric power for regeneration, nor there is any loss of compressed air technical specifications: air capacity 500 to 6000 nm3/hr dew point up to (-)40oc

We are offering heat of compression air dryer.
with the assistance of our dexterous team, we are involved in offering an extensive range of heat of compression type air dryers. In these dryers the compressed air is directly taken to air dryer with the inlet using insulated pipelines. This is achieved at the 120o c, which is the minimum temperature. After, which the hot air is passed through one drying vessel where saturated desiccant is regenerated by this hot air. Further, after picking up moisture from desiccant bed, the air is cooled in an intermediate cooler, wherein the moisture is condensed and removed by auto drain valve. As these are cooled to 40oc, this air passes through the second drying vessel, where the balanced moisture gets adsorbed after, which the dry air comes out. The cycle time of this process includes 4 hours regeneration & 4 hours drying. Moreover, after this 4 hours cycle the changeover of vessels takes place automatically. Further, in this regeneration cycle heating of the bed requires only 2 hours, and thereafter the bed is cooled by dry air. Thus, after the bed cooling, the dry air is again cooled to 40oc in another cooler, which is delivered out of unit as dry air at 40o c temp. Salient features no power requirement for regeneration. No loss of compressed air. Maintenance is easy as there are no blower, no heaters, and no moving parts. Maintains desiccant adsorption capacity to give (-) 400c dew point for almost 5 years. Low-pressure drop across the dryer- less than 0. 3kg/cm2. Skid mounted construction on channel base frame. Fully automatic, continuous operation. Negligible operating cost. It neither requires electric power for regeneration, nor there is any loss of compressed air technical specifications: air capacity 500 to 6000 nm3/hr dew point up to (-)40oc