Jaipur, Rajasthan, India
Verified
Add Review
Our Products
Monads Digital Torque Meters are finally tuned Laboratory grade instruments designed
for Testing, monitoring and Calibrating hand screwdrivers, pneumatics screwdrivers,
torque wrenches, electric screwdrivers, pulse tools, cordless screwdrivers, torque multipliers and other torque tools.
Using a quality torque sensor is key for many companies to ensure that the proper torque is being applied to the screws.
Available in wide range capacity, accuracy, Compact in size and various models
Additional Information:
Payment Terms : L/C
Packaging Details : Comes with Industrial carrying case
Delivery Time : 2-3 Days
The low profile compression disk is designed as the ultimate solution for some difficult applications with critical height for safety reasons. The shear web design provides excellent performance even when the side force inevitably exists in normal operations. The typical example for side force resistance is the applications in motor truck scales. LCD is constructed of alloy steel and fully potted with special chemical compounds to IP67 providing excellent protection against moisture and humidity.
| Features: |
Capacities: 5t, 10t, 25t, 50t, 100t |
| Application: |
Truck / Rail scales |
| Parameter | Value | Unit |
| Rated Output-R.o. | 2.0 | +mV/V |
| Rated Output Tolerance | 1.0 | +mV/V |
| Zero balance | 1 | +mV/V |
| Non Linearity | 0.015 | +% of rated output |
| Hysteresis | 0.015 | +% of rated output |
| Non- repeatability | 0.02 | +% of rated output |
| Creep Error ( 20 minutes) | .030 | +% of rated output |
| Zero Return ( 20 miutes) | 0.030 | +% of applied Load |
| Temperature Effect On min. Dead Load Output | 0.0026 | +% of rated output/C |
| Temperature effect on Sensivity | 0.0015 | +% of Applied Load/C |
| Temperature Range, Compensated | -10 to +40 | °C |
| Operating Temperature Range | -20 to +60 | °C |
| Maximum Safe Overload | 150 | % of R.C. |
| Ultimate Overload | 200 | % of R.C. |
| Excitation, recommended | 10 | Vdc or Vac rms |
| Excitation, maximum | 15 | Vdc or Vac rms |
| Input Impedance | 770+10 | ohms |
| Output impedance | 700+5 | ohms |
| Insulation Resistance | >5000 | mega-ohms |
| Construction | Anodised Alluminium | |
| Environmental protection | IP 67 |
Monad electronics combines precision strain gauge force transducers with dead shaft mounting options to produce the highest accuracy web tension measurement systems.
Monad transducers, developed for web tension applications, incorporate a differential bending beam design with a full Wheatstone Bridge strain gage configuration.
This design provides stable, accurate, and repeatable measurement over a wide range of operating tensions while virtually eliminating temperature drift. All capacities are equipped with mechanical overload protection.
Available with a mounting configuration for dead shaft applications (with horizontal or vertical support surfaces),
| Features : |
Capacities from 2K to 20K Kg |
| Description : |
Web Tension Transducers measure web tension forces applied across a roll, using integral horizontal and vertical axis sensors. This innovative and exclusive two-dimensional approach to web tension force measurement enables accurate determination of the true resultant force, as well as the applied angle. Not only does this permit installation and measurement at any mounting angle or roll orientation, it also combines to form an expert diagnostics system that produces the highest level of web tension measurement confidence available today. The Load ecll is machined from a high strength corrosion resistant stainless steel to yield a low profile single piece construction that incorporates tubular sensing |
During the life cycle of a screw closure, there are a number of factors where the
the performance of the closure is influenced by a particular torque value:
Filling / Sealing
Storage & distribution
first opening
Use, reseal and re-use
In addition to torque generally associated with screw closures ( eg application and removal torque ), closure development areas such as tamper-evident seals, or child resistance have increased the range of torque which need to be measured.
TECHNICAL STANDARDS:
There are a number of international standards which specify equipment and test procedure for evaluting closure torques and the ability of closures to retain torque e.g. ASTM D3192, ASTM D3474, ASTM D2063, ASTM D3198.
MONAD has unrivalled experience in providing affordable solutions for torque measurement applications. The range of products extend from simple manually operated instruments, through to sophisticated computer-controlled systems.
As a low cost digital torque tester, it covers the testing range from 0 to +10Nm. It has been designed for ease of use with a splash-proof, wipe-clean housing and fitted with a universal accessary to suit containers ranging from 10 to 160mm diameter. The universal accessory can be easily removed to allow filling of dedicated sample holders. Data may be output in Rs232, 4-20mA AND Analogue formats, for connection to PC or printer so that results can be easily stored.
| Benefits: |
High accuracy |
Our electronic hanging scale consists of a hanging element, high -precision load cell, 24 bit A/D converter and a 5-digit digital display with high brightness, which can be clearly read from a relatively far distance. Use of anti-shaking and anti-vibrating swing intellectual digital filter stabilizes reading, with a stabilization time of less than 5 seconds. It has the functions of instant taring, and delayed taring. Adoption of low power consumption design extends service life of the battery. With full charged battery, LED display can continuously work for 100 hours. It also has an over-discharge protection circuit, which prevents battery from damage and shortening of service life due to over-discharge. It can automatically save energy which extends the service life of the battery. |
| Crane Scale Application |
| * Foundries, charging, blending, Weighing hot metal, Using lifting magnet * Reverse weighing for dosing applications * Weighing of rolled steel, coils, sheet metal * Control of goods inward/outward * Test loading and safety tests. |
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : Comes with Industrial carrying case
Delivery Time : 4-5 Days
We are the main supplier of this product.
Additional Information:
Payment Terms : T/T
Delivery Time : 2-3 weeks
| Application: |
Tank, bin and hopper weighing |
| Features: |
Capacity ranges of 1, 000 to 100, 000 Kg |
