Our Products
We are Offering a Comprehensive Range of Varied Engineering Parts of Konecranes, Which are Well-reckoned for Their Raw Performance Combined with Advanced Technology. Designed Using Minimal Number of Electrical Components, These Robust Rxh Electric Hoists are Well-equipped with Reliable Hard-wired Contractors, Assuring Easy Installation and Low Maintenance Cost. the Entire Range is Extensively Used for Speed Lifting and Allied Lifting Applications. standard Features: capacity Ranging from 500 to 2000 Kg hoist Suspension: Upper Hook, Push/pull Trolley and Motorized Trolley Model hoisting Motor: External Contractor-controlled and Single-speed Motor traveling Motor: External Contractor-controlled, Single-speed Motor electrics: 3-phase Power Supply with 48v or 115v Low-voltage Control user-interface: Sturdy Pendant and Integrated Strain-relief in Cable overload Protection: Friction-type Torque Limiter other Advantages: minimum Electrical Components and Plastic Parts robust and Reliable Choice for Basic Industrial Material- Handling Requirements safety: Double Protection Mechanism to Protect Thus Protecting the Load Chain (friction Torque Limiter Prevents Accidental Overloading and the Torque Limiter Combined with Rubber Buffering On the Bottom of the Hoist Absorb Impact if the Hook is Lifted Against the Hoist Body) easy Maintenance: a Hoist Panel Encloses the Few Electrical Components easily Accessed wear Parts are Limited.
We are Offering Flow Indicator. applications : these Flow Indicators Can Be Used in Pipe Lines Carrying Oil, Water .therefore These Indicators Can Be Used Where Equipment is Cooled By Water or Oil Circulation such as Transformers , Chemical Equipment , Heavy Duty Bearings , Compressors Etc. Where Stoppage of Flow of Cooling Liquid Must Result in Initiating Precautionary System or Safety Devices. scope: flow Indicators are Mainly Designed as a Safety Device Looking to the Need of An Electrical Signal On Failure of Forced Circulation of Liquid in Pipe Line . specification : 1. Liquid in Tank : Water , Oil . 2. Operating Temperature : 0 to 100o Centi. 3. Operating Pressure : 1 to 4 Kg/cm2.
We are Offering Oil Level Indicator. applications : this Indicator is Suitable for Oil Filled Power Transformers and Oil Filled Tanks . this Indicator Can Be Used Where Level of Liquid Inside a Static Tank is Required to Be Continuously Indicated On a Calibrated Dial . scope : indicator Continuously Reads Level Inside the Conservator and Operates a Switch When Oil Level Drops Near Empty Level Mark that is When Oil Level Drops Too Low . specifications : 1. Operating Liquid : Transformer Oil and other Oils 2. Working Temperature : 0 to 100 O Cm. 3. Working Pressure : 1 to 4 Kg/cm2.
Applications: the Pressure Relief Valve (prv ) is Designed as a Safety Device to Be Used On Power Transformer and Similar Oil Filled Electrical Equipments . When Pressure in Tank Rises Beyond Predetermined Safe Limit , the Prv Operates and Performs Following Functions . reduces the Pressure in the Tank By Instantaneously Opening the Port of About 150 Mm Dia in Case of all T6 Models and Opening Port of About 70 Mm Dia in Case of all T3 Models. secondly, Along with Above Mentioned Function T-3 and T-6 Operates a Switch Which Can Be Used to Initiate Precautionary Electrical System specifications : 1.liquid in Tank : 2.transformer Oil operating Pressure : for all T-6 Models 0.35 to 0.84 Kg/cm2 ( Any One Value as per Demand) for all T-3 Models- 0.35 or 0.84 Kg/cm2 (any One Value as per Demand) 3.port Opening : for all T-6 Models About 150mm Dia . for all T-3 Models About 70 Mm Dia.
We are Offering Bentonite. application: it is Used to Detect Leakage of Water from the Tubes of Closed Air Circuit Water Cooled (cacw) Cooler Mounted On A.c. Motors. specifications: 1.temperature Range : Up to 55o Centi. 2. Nominal Frequency : 50/60 Hz 3. Rated Voltage : 240 V.ac. scope: water Leakage Detector (wld) Senses the Presence of Water Leaked in a Tray from the Tubes of Water Cooler . the Two Sensing Elements of the Probe are Electrically Connected Through Water and Negligible Current in Micro Amps Starts Flowing Between Them Which is Amplified By Monitoring Unit and An Electromagnetic Relay Inside Monitoring Unit Energizes . the Said Relay Gets De-energized When Probe is Uncovered By Water.
The Electrak 1 actuator is completely self-contained and sealed for indoor and outdoor use. Functionally, these models are easily interchanged with comparably sized hydraulic or pneumatic cylinders. Used on intermittent duty applications Electrak 1 actuators provide consistent, repeatable performance in the most rigorous operating conditions including extreme temperatures and humidities.