Tungsten carbide cold heading die for cold punching and heading of screws and nuts.High impact resistance, Toughness, Wear resistance and quality consistency.You are encouraged to use our professional carbide grades for cold heading & punching die nibs. Power metallurgical Compacting dies and other industries. For stable performance and high-cost-effectiveness.

TAPER ROLLER DIES

The rollers are the heart of bearings. The quality of the taper rollers will determine the quality of the bearing and it's performance. We have been successful in developing the taper roller dies for headed rollers. These dies are manufacturer with controlled process, there by maintaining high degree of accuracy. The quality of the headed rollers will determine the further process.

NEEDLE ROLLER DIES

Needle Rollers are manufactured by sliting the wire rod to the required size. We have developed sliting dies with specialised grade there by ensuring optimum performance of the die.

Tungsten Carbide Dies for Ammonium Cartridges. This range has been widely appreciated in the industrial sectors for its efficiency in forging of ammunition. Availed to the customers in a wide variety of specifications, the offered range of Cartridges has been availed to the customers at the most comprehensive and market leading prices.
Following are some of the major features of this carbide range:Precision EngineeredHigh efficiency performance

Varun Udyog carbide tools used in cold pressing screws , rivets , bolts , nuts give a high surface finish and great dimensional accuracy. This type of tool , which is often subjected to heavy blows , calls for high standards in the mounting of the carbide . Varun Udyog has developed special mounting methods giving tools with long life and consequently resulting in low tool cost.

Our particular speciality is the production of diamond dies for fine and ultrafine wire drawing (0.005 mm to 0.07mm). We have developed an innovative method for the production of the smallest diameters in order to offer a top quality product and obtain a superior quality surface. We produce Natural Diamond Dies from 0.005 mm to 2.00 mm

We are successfully engaged in offering an exclusive assortment of Packaging Machine Die Roller Cup. Besides being manufactured using quality-tested raw material and latest machinery, this cup is thoroughly tested by our quality examiners. Our offered cup is highly durable and resistant to rust, hence gain extended appreciation from every nook and corner of the nation. Clients can avail the entire array from us at industry leading prices.

We are recognized as one of the foremost firm in the market, highly involved in offering an extensive array of Forming Die. Fabricated using quality assured input factors and high-tech technology; these are developed according to set international quality norms and standards. These dies are highly admired for their easy installation and robust construction.

Our company offers Polycrystalline Diamond Dies. These are available in various forms and sizes as per the specifications given by our customers. This materials guarantees wire die hardness, accuracy, superior finish and extended die life. Our clients get significantly longer die life, excellent wire roundness and highly predictable die wear with a good wire surface finish.

Compacting Dies is widely used for compacting and bunching the wires.Hole Sizes: 0.380 mm to 35 mm, Reduction Angle: 20-24 degree.

With a precise understanding of the relevant industry, we introduce ourselves as the leading firm manufacturing and supplying Taper Die.

The rollers are the heart of bearings. The quality of the taper rollers will determine the quality of the bearing and it's performance. We have been successful in developing the taper roller dies for headed rollers. These dies are manufacturer with controlled process, there by maintaining high degree of accuracy. The quality of the headed rollers will determine the further process.

Varun Udyog Diamond tools is leading manufacturer of Tungsten Carbide Heading Dies, which is useful for the Steel Ball industry. We are a ISO 9001:2008 company and our product is manufactured under the expert guidance with leading technology and we are dedicated to satisfy customer's need.

We manufacture all types of heading dies suitable for Fastener Industries. These are used for manufacturing headed screw, rivets, Pop up rivets, Bolts, Nuts, etc in different material. Complete solution for fastener tooling from Design, Manufacturing and Execution based on our experience can be shared with our customerThe advantages of cold heading over conventional method, is higher production rate, no change in the properties of the base material since headed at cold stage and no loss of material and better finish . We also manufacture housing for various machines such as Chunzu, Sacma, etc. Most of the sizes are in stock and can be supplied within 1-2 days.

Ball header tools carbide grade is selected depending on factors like ball size, ball material, speed of header machine etc. We also maintain Kanbaan System as per customer request.

The die design recommendations derived from practical experience, theoretical stress analysis, proven application engineering practices and modern manufacturing techniques has helped us to manufacture dies with high tool life and better shape of the ball.
Proper selection of Carbide Grade based on machine, material, cavity design, is important factor for improvement in life of die. We suggest the best suitable design of cavity for optimum performance of tool. We also provide dies with special grade for reconditioning.
The dies are manufactured for various machine such as National, Higland, Waterberry, etc. We can also manufacture as per customer drawing.

Dies and Punches - Bolt and Nut FormerDies with Straight BoreDie Pointin Die ExtrusionDie Double ExtrusionDie CSK and WasherSegmental Hex Forming DiesCut Off Quills, Knives.Dies For Tablet - Pharma IndustriesWe manufacture all types of heading dies suitable for Fastener Industries. These are used for manufacturing headed screw, rivets, Pop up rivets, Bolts, Nuts, etc in different material. Complete solution for fastener tooling from Design, Manufacturing and Execution based on our experience can be shared with our customer
The advantages of cold heading over conventional method, is higher production rate, no change in the properties of the base material since headed at cold stage and no loss of material and better finish . We also manufacture housing for various machines such as Chunzu, Sacma, etc. Most of the sizes are in stock and can be supplied within 1-2 days.
The various types of profile such has Extrusion, Pointing, Trap Extrusion, Countersunk, Washer face, etc are some of the regular manufacturing products. Special dies with hexagon profiles are also manufactured

The die design recommendations derived from practical experience, theoretical stress analysis, proven application engineering practices and modern manufacturing techniques has helped us to manufacture dies with high tool life and better shape of the ball.

We have been counted amongst the most trusted names in this domain, engaged in offering a standard quality range of Tablet Punches And Dies.

The feature characteristic of our Natural Diamond Dies is high performance. Thanks to a careful selection of the raw material(Natural Diamond Stone), as well as a precise manufacturing process , we ensures a well defined and a perfectly consistent profile. Our particular speciality is the production of diamond dies for fine and ultrafine wire drawing (0.005 mm to 0.07mm). We have developed an innovative method for the production of the smallest diameters in order to offer a top quality product and obtain a superior quality surface. We produce Natural Diamond Dies from 0.005 mm to 2.00 mm

(Monocrystalline & Polycrystalline Diamond Dies) for drawing of wires Engineering capabilities of NS to study the specific customer applications and to develop customized solutions.Our polycrystalline diamond dies production system allows us to supply dies with superior polished surface.

A better polish translates into an easier drawing operation & a higher quality finish of final product.Technical advice for choice of PCD blanks with a wide choice of possibilities adapted to each application (Copper, Aluminium, Steel, Alloys. etc) and taking into account your Specifications & performance requirements.
Consistency of the geometry and high level of surface polish for you to achieve the best results in terms of surface finish, tight tolerances, dies performance and to protect your lubricants. Also, get significantly longer die life.