Vadodara, Gujarat, India
Our Products
Drum screen is widely used for screening and classifying mineral materials. Such as metallurgy, mining, chemical, coal, building materials, abrasives and other industries. After the crushed stone is fed into drum, the stone was classified, While the bigger stone flows forward along the inclination of drum and was classified through different mesh screeches gradually. Classified small stone fell into respective bunker, and then were delivered into finished product stack through manpower or automatic flow way.
Introduction To Main Unit Structure-
Flotation machine is also known as mechanical agitation type flotation machine. With radial impeller and air self-suction function, flotation machines of this series are widely used for ore beneficiation both in domestic and international market.
The Grade is Increased by 4-6%0The Recover Rate is Increased by 8%The Capacity is Increased by 12%
Flotation Machineis applied for rough, fine and sweep separating process of ferrous metals, precious metals, nonmetallic minerals and nonferrous metals such as lead, copper, zinc, molybdenum, gold, etc. This series flotation machine is with large inspiratory capacity inflow and low energy consumption. Every chute is levelly installed and performs three functions: inhaling air, inhaling ore pulp and flotation separation without accessories.
Flotation Machineadopts U-type chutes, hollow shaft (for inflation), suspension rotor and especially a new type impeller, which is of large pulp transmission, simple structure and low energy consumption. Air distributors are set up in the impeller cavity, which allows air to disperse loosely so as to enlarge their contact surface.
Model PMQZQ Permanent Magnetic Lifter has strong Magnetic path produced by Nd-Fe-B Magnetic Materials. On and off of the Magnetic path is controlled by turning the manual handle. PMQZQ Permanent Magnetic Lifters has magnet as power, and its lifting power will never weaken.
-APPLICATION:
MINI VIBRATOR
The MICRO series includes electric vibrators of the M4-TR, M20-TR and M3/65 type. It is designed for use in
processes requiring a limited centrifugal force and a small -size machine. These Electric Vibrators are mainly used on automatic machines in the chemical, food and pharmaceutical industries and on packing and packaging machines.
Power Supply: MICRO M4-TR single-phase 220V at 50 Hz or 115V at 60 Hz
MICRO M20-TR single-phase 220V at 50 Hz or 115V at 60 Hz
M3 / 65 single-phase from 11 5V to 240V at 50 Hz or 60 Hz
three phase from 24V to 660V at 50 Hz or 60 Hz
Operation: Continuous service (S1) at the maximum indicated centrifugal force
Centrifugal force: Adjustable from 0 to the maximum indicated value
Mechanical protection: IP 65-7 for M4-TR and M20-TR; IP66-7 for M3/65
Insulation Class: F (1550 C) according to HD 566 standards.
Tropicalizing: Standard supply. Vacuum Impregnation
Ambient temperature: From -300c to +400 C for correction operation.
Fixing: In all positions
Lubrication: Long life maintenance-free type.
Electric Motor: Three phases or single phase asynchronous type, depending on the model
Casting: Made of highly resistance light aluminum alloy with highly polished surface treatment.
Bearings: Screened ball type
Eccentric weights: Lamellar with step adjustment obtained by varying the number of weights installed.
Permanent Magnetic Filter Bar can be installed at any point in solid or liquid Material flows. They can be used up to temperature of 900 C. The Filter bars are manufactured from Powerful Ceramic Magnets in a Stainless steel (AISI 304) Casting. The Construction has High degree of Corrosion resistance and it is quick and easy to clean. The Standard diameter of filter bars is 28mm Dia. For application involving higher temperature (up to 3500C) Version fitted with Alnico magnets can be supplied. In situation where, for example very fine ferrous particles in the region of the ferrous particles have to be separated from viscous materials, the Electromagnetic Industries permanent magnetic filter bar can also be supplied in version with Neodymium Magnetic Material.
HAND MAGNETS
Spiral Classifier is divided into high weir single helix and immerged double helices. It is widely used to form closed loop operation together with bill mill to classify the granules in the ore pulp. And it is applied to classify ore sand and fine mud in the gravity separation process. Also, it can be used to deslime and dewater during ore washing process. It has features of simple structure, reliable running, easy operation and so on.
Introduction To Main Unit Structure-
1. Main Shaft
Wet Pan Mill, also called wet type pan grinding mill, can be divided into gold pan mill, amalgamation pan mill, iron pan mill and electric pan mill according to different working ways. It can also be divided into wheel pan mill, double-roller mill and three-roller mill due to different structures. Wet pan mill is developed and improved from ancient stone pan mill, and widely used for selecting ferrous metals, nonferrous metals and nonmetals, as well as precious metals like gold and silver. It is the first choice for ore beatification plant with all levels
Introduction To Main Unit Structure-
Magnetic Roller is used together with match belt conveyor to remove stones or separate ores in metallurgy mining; to get rid of iron materials in grain processing, building materials and cement industries; to recover metals in metallurgy. Its features are: good performance, strong magnetic field, low investment, easy installation and long service life.
The design of the leaders is adapted to the operating condition imposed by the site. Ex: Leader of Induction furnace with reduces height of load, loader of horizontal aluminum furnace, loader of furnace of induction. The charger of Cupola furnace consists of an electromechanical vibrating conveyor assembled on auto strong wagon. The receipt is contained in a static receiving hopper assembled on monopiece carriage. The end of the vibrating conveyor is equipped with an interchangeable refractory stainless nozzle. Dimensions of the vibrating conveyors of loading can have maximum 2500 mm of width by 6000 mm length, with a capacity of loading of 10 tonnes/minute by operation. The monopiece carriage allows transverse displacements or in rotation.
The Special equipment has some versatile usages for concentration of Ferrite & Magnetic Material, up gradation of Sponge Iron Purity, separating ferrous contamination from non ferrous materials likeAluminum, Brass, Bronze, Copper etc.The Ceramic & refectories industries also have the widest usages for purification. Chemical Industries finds its applications for removal of iron from chemical powder & grains.
-BASIC PRINCIPAL:The Machine works on the induced magnetism principle where by the separation with segregation becomes possible.This ensures the recovery of products in terms of Concentration and with high degree of purity.The Sponge IronIndustries in a particular where the losses of valuable magnetic material with a non magnetic portion takes place, can easily be avoided and thus the spongeiron purity with 99.9% can be achieved.
Wireless remote control diesel engine grab is a new type and top-level grab developed by our company, the diesel engine inside grab connected to hydraulic system and generates power directly, no need extra drums and cables, So it can be operated as remote control grab at any positions and also has electric hydraulic grabs high efficiency for loading and uploading.
Operation with crane, the connection type can be divided as four ropes, two ropes and single rope according to crane, it has many types, which can be designed as orange peel for stone, steel scrap. Rubbish and other irregular materials, which also can be designed as clamshell for coal, sand , mine, grain, clinker and other bulk materials , also can be designed as V Shape For Timber.
Hydraulic telescopic container spreader is especially designed for shore container crane, which also can be used with gantry crane. It suitable to lift 20 ft and 40 ft containers. SWL is 40T.
CDNSI series spreader is driven by hydraulic system, its automatic working provides high efficiency, especially for large container loading and unloading yard.
Electro Magnetic Industries Make Electro Hydro Orange Peel Grab are highly useful in material handling purpose in heavy industries. The use of this Hydraulic Grab saves additional costs by saving labor and power to a large expent. These Grabs are renowned for their distinctive features such as matchless quality, trouble free performance, easy to use, reliable and are highly durable
Scissors grab is scissors structure which is connected by main hinge, and scoop is connected by scissors beam, simple structure. There will be pulley, strengthening beam and tube installed on beam. Support chain is fixed on strengthening tube to connect with upper beam to lift the whole grab. The open and close if scissors beam is controlled by shaft rotation of centre hinge under action of wire rope winding system.
This kind of spreader is suitable to be used on ports and sites which have less containers. And it is suitable to lift 20 ft to 45 ft containers. It can be used with portal crane and stacker crane.
New I Type Semi Automatic Container Spreader
Semi Automatic Container Spreader
Electro Magnetic Industries Unbalance Vibratory Motorised Spiral Elevator is the perfect way to accomplish multiple processes while elevating your product. If you need to heat, cool, dry cure, dewater, or quench while elevating, Spiral Elevator is ideal for your application. Spiral Elevators as they have been known and used for years in all industries for the vertical transportation of materials. They consist of a vertical tube around which winds a conveying path the cross-section can be rectangular or round. According to the spiral like arrangement of the conveying path, a long and effective conveying distance is achieved. Unbalance motors are attached in diametrical positions and in a certain angle either at the bottom or at the top of the tube. They produce tensional vibrations by micro-throw movements over the whole conveying-paths the product is induced to make its way steadily upward. these products ore also employed to convey explosive or inflammable products, which must be handled with great care, avoiding the risk of sparks or explosions.
FEATURES AND BENEFITS:
Vibrating Spiral Elevators are designed to elevate bulk materials along a helical path Smooth harmonic vibratory motion.
Timber grab can be divided as a following types according to type of crane and engineering machine, motor hydraulic timber grab, single rope timber garb, toe ropes timber grabs, four ropes timber grab etc. Timber grab has greatly improved working efficiency, the most important is becoming safer when loading and unloading timber as the machine is separaied with human.
The vacuum fixing devices series VAC are designed to allow quick attachment of vibrators to smooth or, under circumstances, uneven and curved surfaces. A special feature of the the vacuum fixing is the ease of attachment, which requires no welding or bolting.
Construction and working principleConstruction and Working Principle:The appropriate vibrator is screwed to the vacuum fixing and connected to the supply hose leading to the hand valve. As soon as the vacuum fixing is connected to the compressed air supply, the unit is sucked tightly to the mounting surface, thus ensuring a strong connection between the vibrator and the surface.The air economizer S creates a reduced vacuum, which is sufficient to clamp the vibrator when it is not running and which reduces the air consumption by over 30%.ATEX conform vacuum fixing series VAC and units with stainless plate are available.When the vibrator starts, the fixing device automatically produces the full vacuum.
Permissible operating conditions Drive medium:Compressed air or nitrogen (filter 51lm)
Operating pressure:2 bar to 6 bar Ambient temperature: -1 DO C to 60C
Ambient temperature:-10 C 10 60C
NetterVibration offers the accessories required for the mounting , installation and control of vibrators and interval impactors.
Netter Provides Solution:Netter Provides Solutions. Consult our experienced application technicians.
We specialize in computer programming, industrial technology, industrial Controls, batch process, automation systems, weighing, custom programming, GSE scale indicators, compounding, blending, recipe management software and inventory management systems.
EMI Solutions, has achieved a reputation in the industry for the excellence of their automation products and services. The systems we provide to our clients are very reliable, user-friendly and flexible and most importantly, they are customized to the specific needs of each customer.
EMI Solutionss commitment is to provide its customers with state-of-the-art technology and service of the highest quality. Each phase of the project is professionally monitored to ensure complete customer satisfaction. We take pride in our innovative solutions, design, technology, installation, and service. Understanding our customers needs and expectations is the key element of our success and continued customer loyalty.
-Automated Batching Systems for Material Handling -
Ingredient Masters Automated Batching Systems substantially improve the efficiency of powder materials handling. Custom-engineered systems increase output and product consistency, eliminate waste, and generated production data.Automatic powder materials handling systems manufactured by ingredient Masters use off-the-shelf hardware and software to prevent issues with proprietary equipment and platforms and facilitate easy maintenance. The metering systems and powder blenders used in our system are recognized worldwide for highest reliability.
-Key features of our materials handling systems include:-
Ingredient Master provide Custom-Engineered Solutions for Dry Powder Handling.
Bucket elevator has large capacity, high lifting height, stable and reliable operation, long service life and other, the machine is suitable for conveying powdery, granular and small block without abrasive and grinding materials, such as coal, cement, stone, sand, clay, iron ore, because the drawing mechanism is a circular chain, thus can convey high temperature materials (material temperature does not exceed 2500 oC) And the machine can life materials up to 40 meters height. TG type can reach up to 80 meters height.
More than 33 years of experience with the industrial use of vibrators enable us to advise our customers about the beneficial use of vibrators and vibration technologies. Vibrators are drive elements for all types of vibratory equipments. These are in particular conveyor troughs, screens, vibrating tables and silos for all types of bulk handling material. Vibrators are also use in construction industry as internal or external vibrators for the compaction of concrete. Industrial applications are mainly conveying, compacting, emptying, cleaning, testing and feeding of all kinds of products. Vibrators are used in almost all industrial areas in chemical feed industry and food industry, pharmaceutical industry, electronics, foundries, construction industry, animal feed industry and in the packaging industry.
Centrifugal Force Range: From 35 N to 160.000 N
Operating torque Range:From 3.7 to 3000 Kg cm
Power Consumption: From 0.13 K.W. to 18 K.W.
Ambient Temperature: Up to 60C
Heavy industry for e.g. Coal, Lignite, Ores, SaltManufacturing Industry for e.g. Iron and Steel works, Sands, Gravel & Stone Quarries, Glass worksChemical industry for e.g. Synthetic Materials, Rubber, Fertilizers, ChemicalsFood Processing industryTimber industryMechanical Engineering&Manufacturing of Instruments
As Drive For:Vibrating Conveyor through, tubeVibrating ScreenBar Grid ScreensHelical Conveyor
As Vibrators For:Silos, Bins, Deflection, Grids, Filters, Filing Plants, Chutes, Gravity Pipes
Electro Magnetic Industries Cable reeling Drum is spring powered & an essential accessory for lifting magnets in either Mobile Crane, E.O.TCranes, Electrical Hoist, etc.The drum revolves on a pair of ball bearings for smooth operations and rotation of the drum and the reel is almost maintenance free.This reel is fabricated out from heavy gauge mild steel sheet which does not get damaged, being very rugged and has a set of high tension spring on one side to reel and unreel drum and double contact slip rings assembly for power supply to the magnet on the other side.The Slip-ring arrangement is made from high conductive phosphor-Bronze Material and the copper brushes are of very high grade. Suitable and covers are provide to safe guard slip ringassembly and springs.The Lead wires of slip ring assembly are brought out from the drum and are terminated at the terminal station provided on supporting channel.The whole drum will be mounted on the bracket fromounting in different position.
Rotary furnace: the rotary body is made of steel material; the liner is refractory material; the body is supported by couples of supporting roller and the gradient is 3%-6%. The motor drives the gear and the furnace rotates along. Materials are fed into the furnace from the higher tail end and discharged from the lower head end. At the head end, fuel (coal powder, heavy oil and gas fuel) is injected into the furnace and burns inside; and the smoke is discharged from the tail end. The rotary furnace is mainly used in cement industry to calcine cement clinker. Also it is applied to calcine pellets and powder or dry raw materials in refractory and ceramic industry. In chemical industry, it is widely used for drying, dewatering and calcining raw materials.
Coal Gas Furnace is a production equipment that can convert coal into combustible gas gas (main ingredient: CO, H2, CH4, etc). Working principle as follows: After the selecting the coal to meet gasification indexes request, and air-steam mixture as a gasifying agent. Coal through physical, chemical reaction will become combustible gas in the furnace, the upper gas through the cyclone oil, electric fishing filter tar and lower gas through the cyclone dust collector to wash dust, after mixing, gas can be delivered to users directly. Widely used for steel rolling furnace, annealing furnace, forging furnace, steel furnace, glass furnace, aluminum melting furnace, copper furnace, pottery furnace and other kinds of thermal furnace in desired temperature range annealing furnace, forging furnace, steel furnace, glass furnace, aluminum melting furnace, copper furnace, ceramic furnace etc. Various thermal furnace needed shaped furnace temperature range.
Magnetic Pulley operates as head pulley on Belt Conveyors.These low cost, self-cleaning magnets remove tramp iron and purify materials conveyed in bulk forms. When Material carried on conveyor enters the magnetic field surrounding the Magnetic Pulley, pieces of ferrous metal in the material are attached to the Belt.They are held magnetically against the belt until carried to the underside of the Pulley, where the Belts take them away from the magnetic field to be discharged. Non-magnetic material falls away from the Pulley in a normal trajectory. Separation is automatic and continuous.The Pulleys are used to protect processing machinery from damaging tramp metal, eliminate ferrous contaminants from products, concentrate magnetic minerals in mining ores and remove steel from recyclable material.In many applications, its possible to replace an existing head Pulley with a Magnetic Pulley, on a size to size basis
APPLICATION:
Magnesium Rotary Kiln production technology is relatively simple, first of all putting dolomite into crusher, then crushing to qualified material, through the rotary kiln sintering, calcined into calcined white, and then after cooling machine cooling to into ball mill grinding, to powder, through briquette machine into balls, after crushing, with ferrosilicon powder and fluorite powder (including GaF2 = 95%) mixing briquetting, finally into the heat resisting stainless steel reduction rank, putting in reducing furnace, in 1200-1250 oC and making thick magnesium under the 1.33 Pa vacuum degree of vacuum reduction, solvent refining, casting, surface treatment to obtain the finished product magnesium.
Pulse Dust Collector adopted separately chamber offline pulse ash cleaning technology to overcome the anti-blowing cleaning and general pulse cleaning shortcomings, strong cleaning ability, high dust removal efficiency, low emission concentration, small air leakage rate, low energy consumption, less land occupation and reliable operation. This series dust collector is particularly suitable for the following situations: calcium carbide furnace dust removal, ferroalloy plant variety EAF dust remove; steel plant flue gas purification; coal-fired boiler and power plant small boiler dust remove; waste incinerator dust; high temperature flue gas of smelting plant; aluminium plant gas purification; cement plant rotary kiln end kiln head, carbon black plant tail gas and so on. Its featured applications is high temperature and large gas volume area.
—————Introduction To Main Unit Structure —————-
Prong Magnetic Separator is designed for heavy duty large volume liquid and semi-liquid line flow system.The Prong Magnet employ the slip-in cage in stainless steel permanent magnet tubes. The function of Magnet tube is such that, captured tramp metal particles migrate to the rear of the tubes where they remain protected from wash-off until the tubes are cleaned. The magnet cage has positioning lugs that mate with locating recesses in the body of the Prong Magnet preventing rotation as fluid flows through the trap.
Having top access bolt-on steel plant and seal the Prong Magnet is easy to clean. With the Top Magnet case is simple to be lifted out, wiped clean and reinstalled.
Available in 7 standard line sizes from 1 to 18 inches in diameter.
Cement rotary kiln is currently the most advanced on the market, after years of technical innovation, achieved a break through in the calcination system, it adopt the most advanced hydraulic block wheel device at home and abroad, adopts the high metering accuracy metering plunger pump, and high precision speed control valve and contact type graphite block sealing device and other domestic advanced technology in the system. It has the advantages of convenient operation, stable and reliable.
High pressure roller mill is used in mineral industry, building industry, chemical industry and metallurgy industry. It is used for high fineness production of more than 400 kinds of non flammable and non explosive materials of Mohs hardness less than 9.3 richter scale, humidity below 6%, such as quartzite, feldspar, barite, fluorite, dolomite, garnet, carborundum, bauxite, zircon sand, marble, calcite, iron ore, phosphate ore, coal briquette, ceramic, slags, etc. The final product particle size can be adjustable between 30 and 425 meshes.
Introduction To Main Unit Structure -
Introduction to main unit Structure Parts
BULK MATERIAL HANDLING METAL DETECTORS.
DIGITAL METAL DETECTORSGRAVITY FALL (AUTO SEPARATION) METAL DETECTORS
EMI Metal Detectors are the number one systems in the industry and they are proven to be the best investment you will make to protect your equipment and business from downtime and to ensure the quality of your product. Call us for more information on which system is appropriate for your application.
Since 1978, EMI. Has specialized in designing and manufacturing high quality industrial conveyor line metal detectors for the forest products, aggregate, recycling, and other manufacturing industries. Metal Detectors, Inc. is a family business 3 generations strong located in beautiful Eugene, Oregon. With thousands of successful installations worldwide, EMI has always been committed to providing you superior customer support for as long as you own your metal detector and has been the company you have counted on for quality, dependability, and continued product innovation.
| Model/Sens | EM2000-G80 | EM2000-G100 | EM2000-G120 | EM2000-G150 |
| Pass Outer | 60mm (Dia) | 80mm (Dia) | 100mm (Dia) | 120mm (Dia) |
| Ferrous | O 0.4mm | O 0.5mm | O 0.7mm | O 0.9mm |
| Stainless | O 0.7mm | O 0.9mm | O 1.0mm | O 1.2mm |
Tower Mill is a kind vertical Mill, EMI brand tower mill is composed of vertical cylinder, spiral vane and driving device, etc. It is our newly designed equipment after optimizing all the technical data from home and abroad.
EMI brand tower mill is of simple structure and requires small equipment foundation area and plant area. Its features are: stable running, low noise, low energy consumption and long service life. It is suitable for fine millingin both dry and wet grinding process.
Disc Pelletizer is also called Disc Granulator. It whole disc is of circular structure and the disc pelletizing rate can reach 93%. It has three discharging mouths to reduce the labor intensity and improve efficiency. The reducer and motor are connected by the flexible belt. With less impact force, the machine is of longer service life. The disc bottom adopt multiple steed plate firm, durable, non deforming. The base is so firm that foundation bolts are not needed, and it runs stably.
Introduction To Main Unit Structure-
Main accessory equipment of Lime Kiln are feed mechanism, distributor, air supply device, combustion device, an ash discharging device, relatively speaking, in mixed burning, distribution is very important, because when input the fuel and limestone simultaneously to the kiln, material must be rational distribution in the kiln, eliminate furnace the wall effect, the resistance to the entire balance furnace. So distributor form and using effect will make a great impact on the lime kiln production efficiency.
Iron remover is an equipment that produces strong magnetism, which can remove iron materials mixed in the raw materials, so as to ensure the safety work of crusher, grinding mill, etc. Meanwhile, it helps avoid the large and long iron materials doing damage to the belt conveyor. There are different ways to remove iron materials such as by human labor, automation and program control system.
Introduction To Main Unit Structure-
Hydro-Cyclone classifies coarse and fine materials by centrifugal force. Materials are fed by pressure, so more power is needed. However, it is of low cost, small covering space, high classifying ration and large capacity. It Is mainly used as the classifying equipment in the second milling process.Mineral Agitation Barrel is mainly used to mix slurry before flotation in the beneficiation process. V-belt of motor drives impeller to mix drug and slurry completely. It is suitable to mix slurry with density smaller than 50% (weight ratio) and size smaller than 1 mm. This machine can increase reaction time and strengthen reaction quality of the drug.
Introduction To Main Unit Structure -
Rotary Cooling is used for compound fertilizer production, cooling certain temperature and particle size of fertilizer, matched with drying machines. Can greatly improve the cooling rate, reduce labor intensity and improve production. Further removal of part of the water the reduce fertilizer grain temperature. At the same time it also can be used for other powdery, granular materials cooling, rotary cooler is the main matched machine in rotary kiln production system, its structure is simple, good stable performance, reliable operation. The exhaust gas may be introduced into the rotary kiln after heat exchange, thereby improved the thermal efficiency of the entire system.
Improved from Spiral Concentrator, shaking table and centrifugal ore separator, Bailing brand fiberglass spiral chute is the most suitable equipment for mining and ore beneficiation, especially for placer mining at seaside, riverside, sand bank and stream bank. It is of low waterconsumption, small floor area, high concentration and recovery ratio, high adaptability, etc
Parts
Dry type gold concentrate is also known as wind type gold concentrate, which separates gold from other materials via different specific gravity. And it is our newly developed equipment for gold extraction in desert and Gobi, where water is scarce or unavailable. It features are: low investment, high recovery ratio and easy maintenance.
Introduction To Main Unit Structure-
It is mainly designed for handling powder and bulk materials such as chemicals, fertilizer, grain, coal, coke, iron ore, sand, particle construction materials and smashed rocks etc. It has been widely used on ports, steel plants, power stations, ships and garbage treatment plants, and is used together with tower cranes, ship unloaders, travelling cranes and other type of cranes. The garb has its own hydraulic system; all key elements are imported well-known brands to ensure the high performance of garb. It is simple in structure, easy operation and stable in working under all kinds of severe circumstances.
This Magnet is used for taking samples of the material to determine, for example the presence and ferrous degree of contamination.The Length of Magnet is 100 mm the diameter 28 mm.
Magnet CatchersComponents Parts:Hard Plastic body plus magnetic system.This catcher is powerful auxiliary tool in search Of the Iron / Steel things, as it has large contact surface.The catcher can attract Iron / Steel parts or things such as screw, screwdriver and any presswork for connection in workmanship, or move iron / steel other things for a materials.
Features:Large attraction Surface area (150cm x 100cm), light in weight, easy for appear application nice ance, application temperature is 800C.Tool Size: 240cm x 100cm x 210cm.
Series PKL pneumatic impactors are particularty suitable for knocking stubborn residues from walls, pipes and containers.Examples of applications include: elimination 01 tube-forming. bridging and evacuation of residues.
The impact (similar to a hammer) is created by the piston. With PKL 190 to 740 the impact is produced directly against the surface upon which the impactor is mounted.From PKL 200 upwards the impact is procuced against the base plate. The compressed air pushes the piston against one or two springs. The fast exhausting of the piston chamber causes the piston to strike abruptly against th e impact surface.Series PKL impactors can be operated using non-lubricated compressed air.A directional control valve is necessary for activation (not included).The maximum impact sequence is 10 impacts in a row, at a rate of 15 impacts per minute and 180 impacts per hour.
Permissible Operating Conditions:Drive Medium:Compressed air or nitrogen(Filter 5m)Preferably with oil mist
Operating Pressure:2, 5 bar to 6 bar
Ambient Temperature:-20C to 60C HT version up to 160C
NetterVibration offers the accessories required for the mounting, installation, control and monitoring of vibrators and impactors.
Netter provides solutions.Consult our experienced application technicians.
Cyclone dust collector is a class of dust collector device . Dust remove mechanism is to make the dust stream rotary motion , separate the dust from gas stream collected on the walls by means of centrifugal force , then dust particles fall into ash hopper by gravity effect.
Magnetic Sweeper protects tires from damage cause by nails, screws, wire and other steel objects. It can be used in foundries, parking lots, driveways, construction sites, loading docks, trunk terminal, landfill roads, airports, stadium, ship yards and race tracts.They can drastically reduce tire repair and replacement costs and eliminate costly downtime by keeping vehicles in a service. User can recover the cost of magnetic sweeper in few weeks, and then continue to save, year after year. Operation is Simple. Magnetic Sweeper are moved over areas that need cleaning, automatically picking up loose pieces of ferrous material and holding them until the load is ready to be discharged. Sweeper are non- electric, they cost nothing to operate because they are built with permanent magnets.The Magnesium is covered by a life time warranty.
High Frequency Screen is an effective equipment for screening or classifying fine materials such as iron ore, tin, tungsten, tantalum, niobium and etc. In ore beneficiation plant, given that the feeding ore density and fineness (-200 mesh) are proper, and the required fineness is 30% less than that of the feeding ores, the screening efficience of the screen can reach 70% or higher
Introduction To Main Unit Structure -
Power cabinet is designed by the requirement of electric connection: switch gear, measuring device,
SCPA (short circuit protection apparatus) and auxiliary devices are installed in a close or semi-closed cabinet or screen board. It should meet the needs of electric systems normal operation, and is convenient to repair, without hurt to people and damage to equipment around. Normally, the power cabinet can be connected and disconnected manually or by automatic button. Under abnormal condition, the SCPA help cut off the power supply or ring the alarm. The measuring devices can display all the electric data in service, point out or give a signal when some data is abnormal, and some data can be adjusted.
PLC (Programmable Logic Controller) system: PLC series produces developed by German Siemens Company are widely used in metallurgy, chemical industry and printing industry in China. The PLC series products include LOGO, S7-200. S7-1200, S7-300, S7-400 and etc. S7 series of PLC productions can be divided into micro-type PLC (S7-200), small-scale type PLC (S7-300) and medium-to-large scale type PLC (S7-400), and they are of small cubage, fast speed, standardization, reliable running and network communication capacity.
Hydraulic-Drive Wheel-Type Mobile Ore Beneficiation plant is developed by our company to meet the market demand. It is widely used in nonferrous metal, ferrous metal, precious metal and non metal industries. It accomplishes the simplification of equipment installation, repair and maintenance.
Introduction To Main Unit Structure-
