namrata steel

Kumbharwada, Mumbai, Maharashtra

Mild steel plates, also known as plain-carbon steel and low-carbon steel, are extremely strong due to the low amounts of carbon present inside them. Mild steel plates are just sheet material made of steel that can be utilized to make an immense assortment of items and structures. Because of its high strength and malleability, MS plates are a popular steel choice for the construction of pipelines and everyday products. BenefitsHigh DuctilityRobust ConstructionDimensionally StableFine Surface FinishDurableAbrasion ResistantLight weight

Cold rolling is a process by which metal is passed through rollers at temperatures below its recrystallization temperatures. The metal is compressed and squeezed, increasing the yield strength and hardness of the metal. Cold rolling of metal strip is a special segment within the metalworking industry. Cold rolling also helps in strengthening steel by changing its shape without using heat

Boiler quality plates, also known as pressure vessel plates, are produced to make supreme quality carbon steel plates intended for use in welded pressure vessels where notch toughness is important. The steel is killed and can be normalized as it conforms to fine austenitic grain size requirements.

Wear-resistant steel plates, also named abrasion-resistant plates (AR Plates), are used to reduce wear and tear on equipment surface caused by intense rolling abrasion and impact. The key quality for wear resistant steels is their hardness. It Includes Material of Various grades likes , Rockstar , Rockhard, JSPLHARD, Abbrex , Quard , Hardox, & S690QL

Checker plate also known as tread plate, and diamond plate, is a type of metal stock with a regular pattern or lines on one side for slip resistance. These plates are extensively used in domestic as well as commercial and industrial purposes.

Galvanization or galvanizing is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanizing, in which the parts are coated by submerging them in a bath of hot, molten zinc. The zinc coating, when intact, prevents corrosive substances from reaching the underlying iron. Galvanized steel includes GI Coil/Sheet as well as PPGI Coils/sheets which is known as Colour Coated Sheet.

High Tensile Steels are steels at the lower end of the medium-carbon range which have additional alloying ingredients in order to increase their strength, wear properties, and tensile strength. They are hot rolled at extreme temperatures which make them hard enough to bear high temperature and pressure without getting rusty or damaged. Its high strength enables design of lighter, highly durable, and efficient products and structures. The steel is designed to provide excellent welding and bending properties, and offers substantial possibilities for savings in material costs, processing and handling. Namrata Steel maintains a vast inventory of High Tensile (HT) Steel Plates in various sizes, grades, and specifications. We supply HT Plates of Domestic and Imported Make manufactured by the finest mills around the globe. They comply with various Indian and International Standards to meet different segment requirements. We also offer Cut-to-Length plate services to our customers. BenefitsRoof supportsCranes, Dump trucksAutomobile & Offshore IndustryAgriculture & Transportation EquipmentSpiral Cases and Penstocks in Power PlantsPylons and other Architectural Structures

Hot rolling Primarily involves deforming the slab/boom at high temperature & Roll pressure . The Rolling Temp vary from 900*C to 1200* C, which is above the Recrystallization temperature for most stainless steel . This makes the steel easier to form .

Stainless steel Plate, also known as inox or Corrosion Resistant (Stainless) Steel (CRES), is an alloy of iron that is resistant to rusting and corrosion. It contains at least 10.5% chromium, usually nickel, and may also contain other elements, such as carbon, to obtain the desired properties. Stainless steels resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.

Cold rolled steel, sometimes abbreviated to CRS, is well-known for being an extremely ductile material, and is ideal for applications where precision is necessary. Subsequent to the cold rolling, annealing of the cold rolled strip is performed in order to relieve the stresses that build up within the material during the cold rolling process which reduces the ductility of the coil and is required for further processing operations.

Mild steel angles are manufactured by hot-rolled carbon steel or high strength low alloy steel that gives them great stability for various structural applications and other general fabrication repair works. It is widely used in commercial, industrial, domestic, and other engineering applications. MS Angles are L-shaped structural steel represented by dimension of sides & thickness. MS Angles are basically of two types, equal angles & unequal angle . They Come in Two Makes , i.e. Rolling Mill make and Main Make mill .

MS Channels or commonly known as C- channel, because of their C like shape is represented by its Web height & Flange width of the channel. MS Channel primarily carries horizontal gravitational forces.

(MS) Beams made up of high-quality raw materials add to the aesthetics of the construction design. Beams are represented by dimensions of Web & Flange and they primarily carry vertical gravitational forces. I Beam: I-Beams are steel beams fabricated by milling or rolling steel in an I-shape. It is made of a single piece of metal or aluminum throughout the unit . H Beam: H-Beams are steel beams made of rolled steel in the shape of the alphabet H. They are fabricated as built-up units. The flanges are welded to the web to form the H-section. H-beams are also called wide flange beams. The web of I-beams is thinner than H-beams. H-beams have greater web thickness compared to I-beams. UC Beam: Universal Columns (UC) are the most often used section for structural steel purposes. Due to their section shape, they are often called I-sections or H-sections. Unlike a universal beam, the UCs width is roughly equal to its depth

Mild Steel (MS) pipes are manufactured using low carbon (less than 0.25%) steel. Due to low carbon content the pipes do not harden and are easy to use. As MS Pipes are made from mild steel they can easily be welded and formed in various shapes and sizes for pipelining and tubing purposes. Namrata Steel offers wide range of Tubes of Domestic make. MS ERW PipesMS ERWMS ERW pipe stands for Mild Steel Electric Resistance Welded pipe. It is a type of pipe made from mild steel that is welded using electric resistance welding (ERW) technology

Seamless pipe as the name suggests is a pipe without a seam or a weld-joint in contrast to Seam or Welded pipe. In a Seam or Welded pipe, the seam or the weld-joint is the weaker part of the pipe limiting the strength of the pipe to the strength of the weld-joint. Whereas the seamless pipe does not have any such joint and thus has uniform structure & strength all over the pipe body.

These steels have been developed to possess critical properties like strength, hardness, toughness, wear and corrosion resistance. They are easy to machine, stamp, fabricate and manufactured to precise tolerances. We export stainless steel duplex plates that are acknowledged for high tensile strength and durability. Available in various specifications, our range finds applications in varied industry implementations. Our plates are sourced from distinguished manufacturers who provide us these products in ASTM/ASME standards. Namrata Steel is a reputed organization, engaged in exporting and supplying a wide range of alloy steel plates. Our range is widely acclaimed for optimum strength, smooth surface, and durability. Alloy steel plates have an extensive variety of elite evaluations from stock held over our national conveyance and transforming focuses. We stock 100% prime alloy steel plate with full factory affirmations for complete traceability. As plates, these incorporate qualities like hardness, durability, wear safety and consumption safety. A large portion of the alloy steels are not difficult to machine, stamp and manufacture and can be fabricated to exact tolerances.