GST : 02ADUPB7071M1ZA
4.5/5
Our Product / Services
Our Complete range of products are Transformer Oil Dehydration Services and Vertical Sliding Double Door Autoclave.
Experts recommend transformer dehydration for improving the overall transformer efficiency. If you seek professional assistance for the same, get in touch with NE. Based in Solan (Himachal Pradesh, India), we are providing transformer oil dehydration services to the clients in the region. A team of talented individuals backs us up and handles the task of transformer drying, removing moisture, sludge, etc. so, to schedule.
FULLY AUTOMATIC SLIDING DOOR AUTOCLAVE SINGLE DOOR DOUBLE DOOR 1. Chamber SS 316 2. Jacket- SS 304 3. Automatic Door - SS 316 4. Central locking parts- SS 316 5. Shooting bolts- SS 304 6. Outer insulation- SS 304 7. Operating pressure- 1.2 kg/cm2 to 1.4 kg/cm2. 8. Operating Cycle -121C, HVHP-121C Standard/VLT Test/Bowie- dick cycle 9. Stand- SS 304 round pipe 10. Chamber Sensor with PT-100 (Class A) manual in case if any problem. 11. Inbuilt Steam generator- SS 316L 12. Heating- immersion heaters/ALFA 13. All contact parts & Handling accessories basket- fabricated with SS 316 with perforated partition. 14. A process with printer- reports are generated by the software for every cycle in the detailed report. 15. Working pressure- chamber & jacket 1.2 to 1.5 kg/cm2 16. Hydro test pressure- chamber 3.5kg/cm2 & jacket 4.0 Kg/cm2 17. Design chamber temperature- 121C 18. Vacuum- HPHV cycle 19. Door- door internal SS 316L, maximum operator safety- process- 20. Rapid cooling system provision. 21. Lock to prevent the opening of the door during the process, process- Lock to prevent the opening of the door after successful completion of the cycle. 22. Insulation- the sterilization chamber should be insulated with a minimum of 50mm thick R.B. glass wool, which is held in place by an outer cover of SS 304. 23. Vacuum break filter- A 0.2-micron vacuum break air filter is to provide on the sterile side for pressure equalization after vacuum creation.24. Valve package- The process valves in contact with the chamber should be SS 304 contact parts with Teflon seat and tri-clamp connections. All automatic valves are to be pneumatically actuated angle valves. The valves are to be actuated by instrument air controlled via solenoid valves. 25. Steam accessories- The jacket and chamber are to be provided with an overpressure Safety valve. The chamber is to be provided with a steam Trap. 26. Process management system- The sterilizer is to be designed to perform a wide range of the test. 27. Production programs to meet the latest regulatory requirements. 28. Temperature and pressure sensors- Three sensors are to be provided; one inside the chamber return line, one in the jacket and one at the lowest point drain (coldest spot) outlet. For accurate process control and recording, all sensors are connected to the PLC and recorder. A pressure transmitter is to be connected to the chamber. The system should have a pressure least count of 0.002 bars. All utility lines are to be provided with pressure switches for generating an alarm in case of utility failure. 29. Electrical switchgear- The control cabinet is to be provided with a main isolator for the three-phase supply and a separate switch for the control supply. The fascia of the control panel is provided with an indication LED and switches for operation. All the switchgears make L&T/ Schneider. 30. Process recording- Dot-matrix data printer (LX 310i) for recording Preprinting facility for cycle initiation detail, date, time, process parameters (All sensor monitoring), process status, etc shall be provided alarms with the machine. Also, with F0 value. 31. Safety- The process management system shall be provided with a series of safety and alarm features as follows: Cycle over. Too long time to create the vacuum. Utility Failure Alarm. Low water level chamber pressure over. FEATURES: - 1. Fully automatic with 7 HMI & PLC Controller. 2. 4 sensor chambers scan for chamber temperature and one Sensor at drain line for controlling temperature .
450x450x900
500x500x1000
600x600x900
600x900x1200
600x900x1500
900x900x1800
900x1200x1800
Mr. Subhash Kumar (NATIONAL ENTERPRISES)
138, DIC Industrial Area, Baddi, Himachal Pradesh (Soaln) - 173205, Solan
Share us via
