Other Products / Services #890998

• Min. Order (MOQ) 1 Set(s)
• Packaging Type Wooden Packed
• Features Acquiring a matte finish, Maintaining a continuous blasting cycle.Surface Cleaning, Deburring, Works on Suction Induction principle of abrasive delivery.

Additional Information:

• Features Servo driven rotary reciprocating arrangement, Renders uniform coating, 3 times faster than manual operations.
• Airless Internal Spray Painting of pipe from 600 mm to 2500 mm
• Internal pipe attachment from 50 mm ID to 2.5 meters ID.
• Linear Speed up to 5 meter/ minute
• Oscillation speed 0.25 to 0.9 meter/ sec.
• Electronic variable linear speed controllable

• Standard Tank sizes 2.5, 9, 22 & 45 Litres.
• Features Manual & Auto Agitation Eliminated wastage & colour variation Facilitates continuous paint consumption. Maintains uniform fluid flow at constant pressure.

• Type CUB 2.240
• CUB FOUR BALL TYPE CUB
• Output Per Cycle 240 CC
• Air Motor Piston 80 mm
• Stroke Length 70 mm
• Recommended Spray Volume @25 cycles per minute 6 Ltrs.
• Air Inlet Pressure (maximum) 6 Bar
• Output Pressure (maximum) 12 Bar
• Air Consumption Ltrs/ min. @25 cycles/ min. 106

• Features High Flow rate pumps and guns, Priming piston (shovel) type. Suction for high viscosity fluid.Auto cut off/ shut off for pumps.Facility for twin pail switchover system.

• Features Low wear & tear, Longer Service Life, Evenly distributed blat, High Quality

• sizes as below BW 12/ BW 15 • BW 19/ BW 1215 • BW 1519/ BW 17/ BW 21 • BW 27

• Shape Angular
• Application Surface Preparation, Stone cutting, Air Blasting
• Carbon 0.6-1.25 %
• Silicon 0.2-1.1%
• Manganese 1.25%Max
• Sulphur 0.08%Max
•  Phosphorus  0.08%Max
• Density 7 gm/ml Min. contains hollow shots of 10% max
• Hardness 400-500 HV
• Micro Structure Tempered Martensite

• Color Black
• Physical Form Angular Granules
• Specific Gravity 3.5g/cm3 Typical
• Hardness 6 Moh
• Bulk Density 1.75 Tonnes/m3
• Melting Temperature > 2500°F
• Chloride < 7ppm
• Evaporation Rate N/A
• Water Solubility Negligible
• Odor None 
• Conductivity at 25oC 2m/S/m
• Moisture Content <0.1%
• SIZE (MIN – MAX) 1MM TO 1.5MM

• ADVANTAGES Works on direct pressure principle of blasting. Produces high abrasive velocity - thus cleans component faster.Automatic abrasive refilling arrangement.High efficiency for dust collection.

• Features Servo driven rotary reciprocating arrangement, 3 times faster than manual operations.Renders uniform coating
• Airless Internal Spray Painting of pipe from 600 mm to 2500 mm
• Internal pipe attachment from 50 mm ID to 2.5 meters ID.
• Linear Speed up to 5 meter/ minute
• Oscillation speed 0.25 to 0.9 meter/ sec.
• Electronic variable linear speed controllable

Additional Information:

• Modular Design with no moving parts Low maintanance and replacement of cartidge element is easy and quick.
• Variety of fabric material Cartridges are normally of synthetic webbed material. However, other materials can be supplied to suit individual application.
• Quality & reliability Dependable products with in-build quality for trouble free operatioh

• Features Sturdy, rugged & are proven across a wide variety of working conditions.Designed to carry out the multifarious jobs of cleaning & peening in faster time comparitively.The latest deign of Blast Wheel keeps the maintenance cost significantly low.The rubber

• Type 1:170
• HIPPO LOW PRESSURE TYPE HIPPO
• Ratio 1:1
• Output Per Cycle 170 CC
• Air Motor Piston -
• Stroke Length -
• Recommended Spray Volume @25 cycles per minute 4.25Ltrs.
• Air Inlet Pressure (maximum) 6 Bar
• Output Pressure (maximum) 6 Bar
• Air Consumption Ltrs/ min. @25 cycles/ min. 30
• Features Pneumatically sensed Air Motor, High Flow Rate, Stainless Steel, Rust Proof, Hydraulic Body, Easy Maintenance

• Features Pneumatically sensed High Performance Air Motor, High Flow Rate, Stainless Steel, Rust Proof, Hydraulic Body, Easy Maintenance, Ice free motors, Light & Easy to handle

• Motor HP 1.2 Brushless DC
• Electric Motor 1.2 HP Brushless DC
• Max Operating Pressure 3300 (227)
• Max Tip Size 0.025
• Max LPM-Gallons Per Minute 2.3 (0.60)
• Sprayer Weight 34 lbs.
• Bluelink Job & Sprayer Management System Available
• Flow Rate 2.3 Ltr.
• Max Tip Size 0.025”
• Working Pressure 3, 300 PSI (227 BAR)
• Hose Length 50 ft. Support 100 ft (Paint)

• Rugged Cart Design Chrome over steel makes this durable cart last for years.
• Ceramic and Stainless Steel Ball Sets Provides maximum versatility no matter what you’re spraying.
• Easy Out Pump Filter Spill less material when removing the filter element.
• Heavy-Duty Prime Valve Maintenance-free design withstands high pressure dumping.
• Quik Reel Deploy and rewind up to 300 ft of hose in seconds without twists or coils.
• LED Display Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self-diagnostics.
• WatchDog Pump Protection System Saves the pump from damage when paint or texture material runs out or a hose breaks.
• ProConnect 2 Pump Removal System Change out the pump using no tools in seconds resulting in quickly getting back to work.
• FastFlush Cleaning System Cleans the unit four times faster using only half the water.
• On-Board Toolbox End frustration and save time by never again searching for tips, filters, and tools.
• Ready to Spray Save setup time, thanks to the 100 ft of hose and gun that is already attached and ready to use.

• Max working pressure 12 kg^2 cm.
• Meets and exceeds IS 5894:2005.
• Temperature range -30°C to 70°C.

• Application  For Surface Cleaning, Descaling, Deburring, Deflashing, Shot peening on components of Iron & Steel

• Shape Round
• Carbon 0.6-1.25%
• Silicon 0.2-1.1%
• Manganese 1.25%Max
• Sulphur 0.08%Max 
• Phosphorus 0.08%Max
• Density 7 gm/ml Min. contains hollow shots of 10% max
• Hardness 400-500 HV
• Micro Structure Tempered Martensite

Additional Information:

• Voltage 220-240V
• Brand Name Graco
• Model Name/Number Ultra Max II 695
• Max Pressure 227 bar/3300 psi
• Weight 43 Kg
• Power Source Electric
• Width 52.1 cm
• Length 65.4 cm
• Maximum Delivery 2.8 lpm
• Motor Power 1.75 HP
• Frequency 50/60 Hz
• Cycles Per Gallon 64 liter
• MAX TIP SIZE 0.031-1 Gun
• 0.023-2 Guns MAX GPM (LPM)
• 0.95 (3.6) MAX PSI (BAR)
• 3300 (227) MOTOR
• 2.0 hp Brushless DC Features

• Weight 100-600Kg
• Material Stainless steel
• Dust Removal Efficiency 95%
• Grade Automatic

• Country of Origin Made in India
• Abrasive Material Corundum (Virgin Grade)
• Aluminium Oxide Content 90% min.
• Hardness on MOH Scale 09 min.
• Specific Gravity 3.9 min.
• Abrasive Material Emery, Synthetic (Commercial Quality)
• Aluminium Oxide Content 60% min. Magnetic Material 15% Max.
• Hardness on MOH Scale 08 min.
• Specific Gravity 3.6 min.

• Type Blasting Nozzles
• Application Industrial
• Surface Finishing Polished
• Tensile Strength 100-700 MPA

• Usage Industrial

• Features Pneumatically sensed High Performance Air Motor, High Flow Rate, Stainless Steel, Rust Proof, Hydraulic Body, Easy Maintenance, Ice free motors, Light & Easy to handle, Compliance with EC Norms

• Size 1.40-0.30 mm
• Material Steel
• Color Black