Our Products
Additional Information:
Payment Terms : L/C, T/T, Western Union
Packaging Details : Wooden Packed
We are Offering Electro Static Gun for Painting.
Type | 30.150D | 35.275D | 40.110D | 55.275D | 75.210D |
Ratio | 30:1 | 35:1 | 40:1 | 55:1 | 75:1 |
Output Per Cycle | 150cc | 275cc | 110cc | 275cc | 210cc |
Air Motor Piston | 160 mm | 250 mm | 160 mm | 30 mm | 300 mm |
Stroke Length | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
Recommended Spray Volume at 10 Cycles per minute | 1.5 liters | 2.75 liters | 1.1 liters | 2.75 liters | 2.1 liters |
Air Inlet Pressure Maximum | 8 Bar | 7 Bar | 8 Bar | 6 Bar | 6 Bar |
Output Pressure Maximum | 240 Bar | 245 Bar | 320 Bar | 330 Bar | 450 Bar |
Air Consumption N liter per min at 10 cycle per minute. | 400 | 850 | 400 | 1100 | 1100 |
Technical Specifications
COMPONENT | NORMAL COMPOSITION (WT %) Range | (WT %) RANGE |
Silicon Dioxide [SiO2] | 25-35% | 80 mg/m3 ; %SiO2 |
Free Silica | <0.5% | 10 mg/m3 [Respirable Dust]; %SiO2+2 |
Cristobalite | ND | 30 mg/m3 [Quartz Total Dust]; %SiO2+2 |
Tridymite | ND | 80 mg/m3 [Respirable Dust]; %SiO2 |
Aluminum | Oxide [Al2O3] | 2-9% |
Calcium Oxide | [CaO] | 2-9% |
Magnesium Oxide | [MgO] | 1-5% |
Iron Oxide | [FeO] | 45-55% |
Potassium Oxide | [K2O] | 1-5% |
Titanium Dioxide | [TiO2] | 0-2% |
Copper Oxide | [CuO] | 0.7% Max |
ND | - | Not Detectable |
Suitable for High Viscosity, Solventless, Low Solven Coating, Semisolid Coating, Marine Coating Etc.
Additional Information:
Packaging Details : Wooden Packing
Technical Specifications
Particulars | TBA 20"x27" | TBA 27"x36" | TBA 36"x 42" |
Tumbler (Basket) Size | 20"x27" | 27"x36" | 36"x42" |
Size of Wheel (Dia x Width) | 318 mm x 63 mm | 393 mm x 63 mm | 490 mm x 63 mm |
No. of Wheel | 1 | 1 | 1 |
Max. Volume (Cubic Feet) | 2 | 5 | 10 |
Max. Volume (Kgs.) | 100 | 250 | 500 |
Max. Weight Of Each Piece (Kgs.) | 8 | 15 | 50 |
H.P of Balst Wheel | 7.5 | 15 | 20 |
Shots Flow Rate (Tons/Wheel/Hour) | 6.5 Tons/Wheel/Hour | 10 Tons/Wheel/Hour | 12 Tons/Wheel/Hour |
Type of Dust Collector | Fabric Bag | Fabric Bag | Fabric Bag |
Dust Collector Capacity | 1200 CFM | 2000 CFM | 3000 CFM |
Shaking of Bags | Mechanical | Mechanical | Mechanical |
Total Power Consumption | 12.5 HP | 24 HP | 31.5 HP |
Dimension Of Machine With Dust Collector - Length | 3400 mm | 5200 mm | 5400 mm |
Dimension Of Machine With Dust Collector - Width | 1600 mm | 3400 mm | 4400 mm |
Dimension Of Machine With Dust Collector - Height | 4000 mm | 5100 mm | 6700 mm |
Floor Space Required for Machine with Dust Collector - Length | 4200 mm | 5500 mm | 6700 mm |
Floor Space Required for Machine with Dust Collector - Width | 2000 mm | 2500 mm | 3000 mm |
We bring forth Chilled Iron Shot to the clients at competitive prices. Specifications : Mesh Size : 8 52Size mm : 2.00 0.30 Used For : Cleaning descaling, deburring deflashing, shot peening on components of iron & steel
MEDIUM DUTY MODEL – TIGER | 30.150 | 40.110 | 60.110 |
Ratio | 30:1 | 40:1 | 60:1 |
Output Per Cycle | 150 CC | 110 CC | 110 CC |
Air Motor Piston | 160 mm | 160 mm | 200 mm |
Stroke Length | 120 mm | 120 mm | 120 mm |
Recommended Spray Volume @25 cycles/ minute | 3.75 Ltrs. | 3.75 Ltrs. | 2.75 Ltrs. |
Air Inlet Pressure (max.) | 8 Bar | 8 Bar | 6 Bar |
Output Pressure (max.) | 240 Bar | 320 Bar | 360 Bar |
Air Consumption Ltrs/ min. @25 cycles/ min. | 1000 | 1000 | 1150 |
S. No. | Cast Shot Size (Equivalent to SAE No.) | Cut Wire Designation (Inches) | Cut Wire Designation (mm) |
1. | S - 170 | CW - 13 | 0.40 |
2. | S - 200 | CW - 15 | 0.50 |
3. | S - 230 | CW - 17 | 0.60 |
4. | S - 280 | CW - 20 | 0.70 |
5. | S - 330 | CW - 23 | 0.80 |
6. | S - 360 | CW - 28 | 1.00 |
7. | S - 460 | CW - 32 | 1.20 |
Shape | Description | Specification |
As Cut (-U) | Cylindrical with Sharp Edge | SAE J441/ IS 5873 - 1970 |
Additional Information:
Delivery Time : Ready Stocks
Serial Number | SAE Number | Size in mm |
1. | S - 70 | 0.180 |
2. | S - 110 | 0.300 |
3. | S - 170 | 0.425 |
4. | S - 230 | 0.600 |
5. | S - 280 | 0.710 |
6. | S - 330 | 0.850 |
7. | S - 390 | 1.000 |
8. | S - 460 | 1.180 |
9. | S - 550 | 1.400 |
10. | S - 660 | 1.700 |
11. | S - 780 | 2.000 |
S. No. | IS Grit No. | Particle Size Range (mm) | Equivalent BS Seive Range | Retention Min. By |
1. | 16 | 1.40 - 1.00 | 14-16 | 50% |
2. | 20 | 1.00 - 0.710 | 18-22 | 50% |
3. | 24 | 0.710 - 0.425 | 25 - 36 | 50% |
4. | 36 | 0.500 - 0.300 | 36 - 52 | 50% |
5. | 60 | 0.355 - 0.180 | 60 - 85 | 50% |
6. | 80 | 0.250 - 0.150 | 75 - 100 | 50% |
7. | 100 | 0.212 - 0.125 | 85 - 120 | 50% |
8. | 120 | 0.180 - 0.106 | 100 - 150 | 50% |
9. | 220 | 0.090 - 0.045 | 240 - 350 | 50% |
Specs For Tiger Models
HEAVY DUTY MODEL – RHINO | 55. 275 | 60.180 | 70.150 | 75.210 |
Ratio | 55:1 | 60:1 | 70:1 | 75:1 |
Output Per Cycle | 275 CC | 180 CC | 150 CC | 210 CC |
Air Motor Piston | 300 mm | 250 mm | 250 mm | 300 mm |
Stroke Length | 120 mm | 120 mm | 120 mm | 120 mm |
Recommended Spray Volume @25 cycles/ min. | 6.8 Ltrs. | 4.5 Ltrs. | 3.75 Ltrs. | 5.25 Ltrs. |
Air Inlet Pressure (max.) | 7 Bar | 7 Bar | 6 Bar | 6 Bar |
Output Pressure (max.) | 350 Bar | 385 Bar | 420 Bar | 450 Bar |
Air Consumption Ltrs/ min. @25 cycles/ min. | 2100 | 2700 | 2100 | 2700 |