Our Products
Additional Information:
Payment Terms : T/T
Delivery Time : 4 to 5 days
lenticular Filter Modules are a new type of filter cartridge using depth filter sheets. It is designed using a double separator concept.
The Separator design increases the total stability of the filter cartridges as the separators full support the sheet material. This design also prevents filter sheet deformities after heat treatments and adverse effects of contact with hot sanitation. It is manufactured with rigid external clips to prevent damaging filter sheets during module loading and unloading while allowing for easy and reliable handling.
SALIENT FEATURESMaterial of Construction[Depth filter sheet]: Cellulose fibers, Resins, Perlite, Natural Diatomaceous earths, and etc.[Core/Separator]: Polypropylene (PP)[Double O-ring or flat gasket]: Silicone, EPDM, Viton
PerformanceTypical ratings :C002 :0.2-0-4mC004 :0.4-0.6mC100 :1 -3mC1 50:2-5mC200: 3-7m
Polypropylene Pleated filter cartridges are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries.
Polypropylene pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micro ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside, thereby providing a filter with in filter, which considerably increases contamination holding capacity & through puts.
FEATURES & BENEFITS
CONFIGURATION
APPLICATIONS FINE CHEMICALS AND PHARMACEUTICALS
PHOTOGRAPHIC FILM & PAPER
BEVERAGES
Available in needle felt and mesh type material. All material is FDA compliant. Wide selection of filter media. e. g. Polypropylene, Polyester, Nylon, Cotton, non woven. Various micron ratings from 1 to 200(felt material). Positive sealing arrangement with S.S or rubber or plastic collar or by snap band type ring.High performance Available in single and double length. Broad chemical compatibility.
SPECIFICATION
FILTER BAG SIZE | DIAMETER (INCH) | LENGTH (INCH) | FILTERATION AREA FT2 | MAX. GPM |
1 | 7.25 | 16 | 2.0 | 100 |
2. | 7.25 | 31.5 | 4.5 | 220 |
3 | 4.31 | 8.0 | 0.5 | 25 |
4 | 4.31 | 14 | 1.0 | 50 |
|
Additional Information:
Payment Terms : T/T
Delivery Time : 4 to 5 days
Sizes
Diameter (Inch) | Length (Inch) | Filteration Area FT2 | Max. GPM |
---|---|---|---|
7.25 | 16 | 2 | 100 |
7.25 | 31.5 | 4.5 | 220 |
4.31 | 8 | 0.5 | 25 |
4.31 | 14 | 1 | 50 |
We manufacture a quality product in Mosquito Repellent Mat Sheets & Pre Cut Mats on a very highly sophisticated production plant. The entire process of manufacturing is untouched from the pulping stage to the finished product.This is a high precision completely automatic plant which ensures an uniformly produced paper
Our raw material is continuously monitored for quality control. Constant laboratory tests are conducted to check pad porosity, absorbency, and bursting factor & other regular tests. The fibers of our paper & pads are also subjected to a special porous chemically inert wet-strength impregnation process to impart very high mechanical strength.
We can supply our Customers required G.S.M right from600 to 1300gsm, required thickness, Porosity and other Technical matters.
Our Raw Material Consists of Cotton Linter Pulp with different Grades, Softwood pulp & Hardwood Pulp with its appropriate percentage.
Our Company has been supplying in most of the reknowned Mosquito Repellent Companies in India & in foreign countries.
Our product was even tested and approved by the leading chemical Manufacturer in Japan for mosquito Repellent mat.
LAB APPRATUS INSTALLED1. AIR POROSITY TESTER :- It is used for testing and measuring Porosity of Mosquito Mats and Filter Paper.
2. B F TESTER :- is intended for measuring the bursting strength of paper /strong paper board by submitting it to an increasing uniform hydraulic pressure. This instrument is reliable and designed to produce the result with high accuracy and repeatability by incorporating Electronics Automatic Pressure release system and conforms to international standard.
3. FREENESS TESTER :- is intended for determining the drainage capabilities or beaten pulp and is universally used to check the progress of the beating process and conforms to the International Standard.
4. STIFFNESS TESTER :- is intended for measuring the stiffness and resolution quantities of paper card-board, plastic light metallic sheet spring wire with high sensitivity and precision accuracy 1% of full scale range and conforms to the International Standard.
Carbon has been used for many years in loose form to remove color and odor from liquids. In certain applications the loose carbon can be replaced with a carbon impregnated filter pad. When using loose carbon, it is necessary to remove the carbon with some means of filtration. If that includes a plate and frame filter press, then the press can be dressed with activated carbon filter pads, eliminating the need for dumping loose carbon into a mixing tank, and then scraping the carbon off of a filter paper or cloth.
NCBM offers its series in Two different grades, BK2 , BK25. Each grade can be manufactured with various different grades of carbon, allowing to help optimize your filtration