Natural Pest Control Pvt. Ltd

Majge Nagar, Latur, Maharashtra

Service/s Specifications Purpose of purpose and subcontract scope of work: The purpose of this service agreement is to provide a termite proofing to your said premise at the site specified in the provided quotation, service agreement and further upon completion of the application to premise a WARRANTY CERTIFICATE will be issued for the period of TEN YEARS covering proofing against TERMITES. Termicides: An aqueous solution (emulsion) with the active ingredient of CHLORPYRIFOS, IMIDACLOPRIDE, and BIFENTHRIN with accurate approved concentration percentage is adopted in application as per the manufacturer’s recommendation and product label. Above mentioned, is an effective termicides specially designed for termite control services which is exclusively registered & approved in the India and its use and application restricted to professional pest control organizations only. Proposed Application Procedure in case of Major Treatment & re-infestation Treatment: All insecticides applications are performed in the form of spraying with high and / or low power pressure spray, Brushing, Smoke and Trapping Instruments / Equipments / Chemicals. A. Sub Slab Injection (Indoor and Outdoor): Drilling holes (which is 10mm to 20mm diameter, up to 1ft to 1 ½ ft in depth and at interval of 1ft to 2ft) with help of drill machine are carried out at the junction of the floor and walls and at floor level slanting towards core with approximately 45 degree angle at inside and outside (if concrete floor applied) of the premise. B. Injecting an aqueous solution (Emulsion) of termicides into holes with help of hand / pressure / power pressure pump to reach the soil beneath the slab thus creating a chemical barrier to resist termite. C. Roding and injecting an emulsion of termicides D. External Perimeter Trench: Treatment to the trench around the external perimeter surface of premise. Roding and injecting an emulsion of termicides E. Sealing hole with help of treated caulk and cement

Scope of Work: i. Treatment of the excavated trench - Bottom Surface & Sides of the excavation ii. Treatment for RCC Foundations - Backfill in Immediate Contact with Foundation iii. Treatment of Top Surface of Plinth Filling - Top Surface of Plinth Filling iv. Treatment at Junction of Wall and Floor v. Treatment of Soil along External Perimeter of Building

For new buildings, it is important to get pre-construction anti-termite treatment done to build a strong building. We provide large scale Pre-Construction Anti-Termite Treatments for commercial as well as residential buildings after a thorough inspection. Our techniques help you remove termites and also keep them at bay.    Details : A emulsion with the active ingredient of Chlorpyrifos / Imidaclopride / Bifenthrin with accurate % is Adopted in application as per the manufacturer’s recommendation and product label. Above mentioned, is an effective termiticide specially designed for Termite Control Services which is exclusively registered & approved in the INDIA. It is a termiticide with use and application restricted to professional pest control organizations only. The use by unauthorized applicators may result in severe health hazards and improper proofing coverage as per the WHO regulations.   Soil Application : Horizontal Barriers Vertical Barriers Exterior Perimeter around base of foundation/slab Exterior Backfill soil around foundation walls. Type of Building/Structure Building with Monolithic Slab Building with deep footing Building with basement Building with high water table.   Building with Monolithic Slab : Horizontal Barriers - In the case of single pour monolithic slab that does not have separate slab or footing, an overall horizontal barrier Shall be created before the concrete slab grade beam or ground floor are poured/casted on fill dirt/soil. At this Stage the application rate of the chemical is to be 4-6 liters of emulsion per square meter sprayed evenly to the Slab area. If fill dirt/soil is washed gravel or other coarse material the emulsion shall be applied at the rate of 7 Liters per square meter. Special care should be given to critical areas beneath the slab such as utility pipes entrances.   Vertical Barriers : (Exterior Perimeter around the slab) An exterior vertical barrier shall be created when the ground concrete slab has been poured /casted and final Exterior grade is established. The emulsion is to be applied at the rate of 5 liters per linear meter along side of the Slab in 30cm width x 40cm depth to the bottom of the slab.

Our Fly Control Services are regarded widely as one of the best. Our service involves analysis of the type, size and characteristics of the pest involved. The steps are taken according to the type of pest so that the problem can be removed as quickly and as effectively as possible. The next step involves processes to ensure the safe standards.   Objective : To implement the vector management services to identify the species & assess the size & extent of the flies & thereby achieving good control over menace of flies.Program Consists Larvicidal Treatment for fly maggots/and on breeding sites Control of movement of adult flies by using aerosol sprays Handling the special equipments such as power sprayer used in space spray & handling equipments used in spray operations. Chemicals used : Equipment used - Low pressure sprayer (Knapsack), Spray motorized portable sprayer, Power spraying machine, Treatment Time : Morning for flies & evening. Area of application : Aerosol sprays in dining & serving area, upper walls, door jumps & other resting areas. Spray treatment in all the garbage yards, dumping yards & other fly breeding sites. Always wear personal protective clothing & safety equipments such as gloves, goggles & shoes. Spray evenly in all the areas. Maintain the pressure of the spray equipment around 36-60 psi Frequency of the treatment: After every 2 Months Tips on effective Fly Management Services: Advice the client on Good sanitation practices – indoors & outdoors Give advice on prevention of breeding. Elimination of food & shelter Provision of screening on openings. Proper handling of garbage & other waste Covering garbage cans with tight fitting covers Maintain the velocity on air curtain @ 1600 ft/min or more Proper location for installation of insect killer machine. Identifying potential fly breeding sites & eliminate or modifying the breeding site Targeted properties : Communities, hospitality industry (hotels, hospitals…) Food Processing Areas, Garbage, filth Areas & breeding sites.   Application Mode : Low & Power spraying on the garbage, sewer lines & other such breeding sites.

Pests like cockroaches are known to cause havoc in infested areas, and they bring with them a wide range of diseases. Our world class Cockroach Pest Control Services provide the best solution for a cockroach infestation problem. We provide the best of the solutions after proper analysis of the problem and ensure that the problem doesn’t return anytime soon.   Objective : To implement the system of Anti cockroach & othher crawling inssect treatment to identify the species & asses the size & extennt of the Cockroaches & other crawling pests population & thereby achievving optimum control. System Consists : Control of cockroaches & crawling pests by spot treatment of gel bait, Blow Dusters Pressurized injection, Liquid Injection with special injector etc. Documentiing the activitiees on continuouus process. Pests covered : Cockroaches (German Cockroaches, American Cockroaches, Oriental Cockroaches, Brown bandedd cockroaches)Red ants, black ants, etc.   System Component : Inspecting premises to prrovide a surveyy on the nature & extent of infestation. A comprehensive service plan, keeping contamination & safety in mind for spot treatment of gel bait. In, under & around cabineets. Along all plumbing lines. In, under & around all eleectric appliancees including refrigerators, dishwashers, washers & dryers, microwaves, coffee pots, tvs, radios & computers. A pea should also be placed on top of each electrical plug. On the bottom of drawers. Any other suspected roach harborages site. Maps or schematics showing the locations of the application of gel to be carried out shall be maintained Complete technical supervision & monitoring Program Description : Chemicals used : Gel baiit Equipments Used : Gel Innjector Gun for gel bait, Drain tip to be installed on the Knapsack sprayer, pressurized microinjector. Parameters of the treatment : Spot treatment of gel bait     Features : Odourless application - Safe to human population since over 90% foods as attractant. Cascading effect due to the omnivorous character of cockroaches feeding on excreta & dead cockroaches. Results of baiting will take a minimum of 10 days to fructify. Advantage of not removing material where applied on. Ideal when applied in storage areas. Baiting application using applicators only. Injection with Duster: Electrical areas, crack & crevices. Liquid injection: Equiped with special injector gun whichead to precise the insertion in crack & crevices.   Pressurized injection : Termite/wood boring insects inside crack & crevicces. Always wear personal protective clothing & safety equipments such as gloves, goggles & shoes. Tips on effective System Application : Advice the client on Store food in insect-proof containers such as glass jars or resealable plastic containers. Keep garbage & trash in containers with tight-fitting lids & use liners. Keep trash cans away from doorways. Remove trash, newspapers, magazines, piles of paper bags, rags, boxes, & other items that provide Harbourage Eliminate plumbing leaks & correct sources of free moisture. Increase ventilation if condensation is problem. Vacum cracks & crevices to remove food & debris. Be sure surfaces where food or beverages have been spilled are cleaned up immediately. Vacuming also Removes cockroaches, shed skins, & egg capsules. Keep your kitchen clean of food spills, especially during nights. Avoid keeping unwashed utensils in the sink Consequently an effective bait program does not give immediate results, but may take 7 days or longer. Baits can be quite effective for long-term control of cockroaches unless the cockroaches have other food Sources available to them.   Points to note : Seal cracks & other openings to the outside. Use weather stripping on doors & windows. Look for other methods of entry, such as from items being brought into the building, especially appliances, furniture, & items that were recently in storage. Inspect food deliveries before putting them in kitchens. Look for egg cases (oothecae) glued to undersides of furniture, in refrigerator & other appliance motors, boxes, & other items. Remove & destroy any that you find. Locate & seal cracks inside the treatment area where cockroaches can hide. Trim shrubbery around buildings to increase light & air circulation, especially near vents, & eliminate ivy or other dense ground covers near the house, as these may harbour cockroaches. From around the outside of buildings remove trash & stored items such as stacks of lumber or firewood that provide hiding places for cockroaches. Consider keeping a layer of gravel about 6 to 12 inches wide around the perimeter of buildings.   Targeted properties : Residential, communities, hospitality industry (Hotels, Hostel, Hospitals) Food Processing Areas (with high care), All kind of Storage Inject drops in off ground surfaces in cracks, crevices, cabinets, electrical, appliances motors, hoods of oven in kitchens, pastries, bakeries, food storage & plants, opertaion rooms & wards. Application Mode : Done by a special Applicator, Gel Injector with less or no spills & is odorless, in off ground surfaces. This gel bait could be used inside a unique bait station to be use in high sensitive area for food process. Injection with dusting powder with a special duster for electrical areas, crack & crevices. Liquid injection with special injector connected the sprayer gun’s head to precise the insertion in crack & crevices. Pressurized injection to be used for termite or other wood boring insects inside crack & crevices. Monitoring tools: Detector monitoring traps, Exoroach trap (For monitoring & control), Monitoring form for Safespray & Insjecta

Rodent Control is one of the most difficult pest control processes. Therefore, our Rodent Control Services involve organized steps that are implemented accordingly to each type of organization. First, we set up traps and baits to bring out the rodents and then we capture and remove them. After that process, we undertake steps to ensure that the problems do not return as quickly as they went away.   System Consists : Containing the activity of rodents. Setting the devices used in any rodent control program Documenting the activities on continuous process. Pests covered under this System : Rodents System Component Inspecting the premises to provide a survey on the nature & extent of infestation. A comprehensive service plan, keeping contamination & safety in mind for baiting & trapping. Application of latest management materials such as glue boards & rodenticide used for the rodent management Service is a registered products approved for use at some internal areas of premise. Installation of rodent bait stations of tamper resistance standards in the external perimeter & some internal areas Of the premise (if necessary ) Maps or schematics showing the locations of the rodent control devices shall be maintained. A record of the service & cleaning of rodent control device shall be maintained in each device. Complete technical supervision & monitoring Periodic replenishment of baits & resetting of traps. Baiting with state-of-Art anticoagulant rodenticide in different forms : pellets, cereals, soft & wax blocks, placed in protective & tamper proof bait stations. Trapping with manual & automatic cages/devices. Trapping with self-glue boards. Program Description   External Areas : Chemicals used : Zinc Phosphide / Bromodilone Frequency of the treatment: Fortnightly / Monthly Equipment used : Rodent bait stations, Rodent glue trap, Rat snap Trap & cages. Treatment Time: Always after cleaning & after Safespray, day or night. (For food processing by night). Installations of tamper resistance bait stations in the exterior perimeter of the facility at 50 -100 feet intervals. (15 -30 meter ) These bait stations will be properly positioned, anchored, with a provision of lock & key & properly labeled. Numbering/marking will be done according to the site map.Registered & Approved rodenticide will be used either in the granular form or wax blocks form. Services to these devices shall be in line with levels of rodent activity in the bait stations. However, all stations shall be inspected & serviced. Each service & the results of the service will be documented for each bait station.   Internal Areas : Installation of bait stations made out of durable materials in the rodent runways & wherever there is a potential For rodent entry into the premise & glue boards could be used in these stations. These devices shall be properly positioned & secured to keep them in place, under lock & key. Numbering/marking will be done according to the site map. Services to these devices shall be in line with levels of rodent activity in the bait stations. However, all stations Shall be inspected & serviced regularly. Each service & the results of the service will be documented for each bait station. In internal area of the premise placement of bait station is not recommended. Disposal of dead rats If any dead rat found either in the glue board or in the external bait stations, the dead rats should be collected in A disposal brown paper bag & tied. Then either burry them in to the soil or disposed off in to the city waste/ garbage dumps. If the dead rat is found on GLUE boards the rat along with the board can be disposed off as stated above. Always keep the records of the dead rat collected from each account. Always keep the records of the chemicals Used as well as the other material used in each service contract. Tips on effective rodent control program - Advice the client on Good housekeeping practices – indoors as well as outdoors Make good of the possible route of rodent access to the building Elimination of food & shelter Removal of rubbish piles Proper handling of garbage & other waste Covering garbage cans with tight fitting covers Clearing grasses, weeds & other undesirable vegetation on the exterior of buildings Follow proper storage practices with inspection aisles Identifying potential rodent harborages & eliminate or modifying them   Points to note : Before starting a rodent control program eliminate as many sources of food as possible to encourage rodents to Explore & forage for food & take readily to baits on traps Keep bait stations clean & in good working conditions. Do not use traps with uneven bases. The wobbling will frighten the rodents Avoid handling dead rodents with bare hands to prevent contact with ecto parasites or disease organisms. Do not touch pets before handling traps. Odors of natural predators such as cats & dogs on traps may cause rodent aversion Glue traps should be stored properly in warm weather to avoid dripping of glue.   Targeted properties : Residential, communities, hospitality industry (hotels, hospitals…) Food Processing Areas, Storage,   Application Mode : Baiting with different type of bait in specific bait stations & trapping with different types of traps. P r o t e c t i n g H e a l t h , P r o p e r t y & E n v i r o n m e n t Public Health Pest Control Termite proofing (Pre & Post) Food Safety Service & Consultancy Pest Control Products Natural Pest Control Pvt. Ltd Tips of construction defects / entry points to inspect Chimneys Roof ventilation Cable vents where wires enter Broken or open doors Torn window screens Broken sewer pipes Crawl spaces under building Overhanging tree branches Damaged walls or floors Rotted /damaged wood Under construction areas   Fact to know about Rats : It is difficult to rat- proof a structure without first knowing the capabilities of rats. When rat -proof, remember rats are acrobats! Here are some of the amazing things rats can do : Reach about 13 inches in length Gain entrance through openings as small as only 1/2 inch Sq. Climb the outside of vertical pipes & conduits of any size if they are within 3 inches of a wall Crawl horizontally on any type of pipe or conduit Jump vertically as high as 36 inches from horizontal surface Jump horizontally 48 inches on a flat surface Jump horizontally at least 8 feet from an elevation of 15 feet   Drop 50 feet & survive : Burrow vertically in the earth to a depth of 4 feet Climb brick or other rough exterior walls that offer footholds to gain access to upper stories of structures. Climb vines, shrubs, & tress, or travel along telephone or power lines to gain access to upper floors/ building Swim as far as 1/2 mile, dive through water plumbing raps, & travel in sewer lines- even against substantial Water currents Gnaw through a wide variety of materials, including lead sheeting, sun dried adobe brick, cinder block & Aluminum sheeting   How You Can Prevent Rat Problems. : Suburban areas are ideal habitats for rats. Many things that are a part of our lifestyles can increase rat problems. Below are some things you can do to prevent rats invading the property. Remove sources of food. Pick up your pet's droppings. Rats can subsist on dog dropping when no other food is available Don't put bread or seed on the ground. If you feed squirrels or birds, you may also be feeding the rats Use metal trashcans with lids. Rats can gnaw through plastic garbage cans Harvest vegetable gardens as soon as they are ripe. Remove sources of water (bird baths, pet water bowls, standing water in splash basins, etc.) Rats require only 1/2 to 1 ounce of water day Remove rat shelters. Keep woodpiles elevated 12-18 inches away from walls. Steps leading into a house should Be masonry or concrete. If they are made of wood, keep the space underneath bare. Poisoning & trapping alone cannot controls rats. If you have an infestation of rats, you must remove all Resources of food, water & harborage for effective control

For complete safety from pests and related diseases, we provide Structural Pest Management Program for residential and commercial spaces. With proper processes and techniques, our pest control programmes go on for over months and include regular checks. Dealing with big commercial spaces as well, we provide 360-degree pest control procedures and programmes.   Description : Termitreat Treatment - Pre Construction Anti Termite Treatment Post Construction Anti Termite Treatment Wood Borer Treatment (PPB Treat)

Public Health Pest Management Program is an effective pest control service provided by us that provide removal of and protection against various pests that pertain in general outdoors. They include bee protection, Cockroach, rodents, flies, mosquitos, bedbugs, etc. which hinder the functioning in general and also bring with them various kinds of problems such as diseases.   Public Health Pest Management Programs - Household Disinfestations (Safespray Treatment) Cockroaches Management & Control  (Injecta Treatment) Rodent Control Service (Ratproof Treatment) Mosquitoes Management & Control Service Fly Control Service Bedbug Management & Control Service Textile Pest Control Service Weeds Management Program Honey Bee Control Service Lizard Control Programs Bird Control & Management Service Garden Pest Control Services

We provide high quality Fumigation Services against various insects that can cause havoc in a particular place, against stray animals that hinder the functioning and pose danger and also against weeds and other opposing forces of horticulture. Our services ensure long term protection against these hazards and that the life in the area is smooth and healthy.

The Integrated Pest Management Program or the IPM, as it is known widely, is a two stage programme against harmful pests. It involves functions on our part and on the client’s part as well. First, the danger causing sources are removed by us using our highly modern techniques. Then the client is trained in certain techniques and activities that would ensure the problem doesn’t come back in the long run.   What is IPM? Integrated Pest Management (IPM) - is a pest control program which requires the implementation of at least two (2) control measures; is about a joint team effort between the Pest Control Contractor and the Client in order to achieve the Control of Pest to the highest possible level. This means that the client must understand the importance of their role in an IPM Program and give full support to any Action that may be required to prevent pest entering and proliferating within their property. This is the priniciple behind Natural Pest Control Pvt. Ltd treatments (e.i. Safespray, Insjecta, Ratproof etc)   Pest Control Method : Sanitation : cleaning and removal of pest harborage Example : removal of unnecessary materials in an office; use of disinfectants and cleaning of infested premises; Constant garbage collection : removal/dehydration of stagnant water from containers or canals etc. Remove dead trees. Break wood-to-soil contact. Remove scrap wood and paper debris. Improve drainage system from structure. Inspect vapor barrier. Improve ventilation in crawl space. Physical : The use of natural physical properties such as extreme differential light rays, heat and cold as well as dehydration Example : installation of electric fly killers which attracts and electrocutes any flying biologicals that touches a Lamp : application of too much heat to kill unwanted insect pest from a Commodity : use of electronic fly killers. Chemical : The use of organic and inorganic compounds that are formulated to kill pests either through contact, inhalation or ingestion (feeding). Cultural: the changing or alteration of environmental or working habit of humans to reduce pest harborage Example : proper storage facilities and practices that reduces pest population such as storing in enclosed materials including refrigerator; purchasing/buying of enough food materials to avoid excesses. Mechanical : Is the direct killing of pests such as pitting, smashing or crushing of an animal pest. Structural : This is also known as pest proofing; it includes the manipulation of the environment to avoid the entry breeding of pests (e.g. sealing of silicon in gaps, sealing of holes etc.) Biological : This method is the use of other living organisms to control pests. This is highly important in agriculture but   Basic Steps of IPM Program : Inspection of the premises Fecal matters, Living individual of the pest, Ead adult specimens of the pest, Signs or damage infested by the pest and Immature stages of the pest are generally the clues important for efficient treatment of pests. Identification of pests, pest damage or the potential for pest infestation After completion of Inspection, the pest management professional must identify what pests are infestating the structure. The proper Identification leads to the effective control strategy. Determination of the extent of the pest problem Clumped population- this means that the pest is only situated in a single area where you can find the Individual pest Randomly scattered- this means that the pest is hard to locate its specific location but are observed infesting a lot of areas, and qually distributed-this means that the pest is most probably be found in the whole area at the same degree of population. Although you cannot define the precise population, the control treatment itself can be manipulated/decided by analyzing in this way. Control treatment/procedures appropriate to the problem. The control treatment must be highly specific, in accordance to the degree of population, place of infestation and the behavior of the pest. In pest control industry, wherein formulated pesticide products are broadly used, it is important to read the specification of the product from their labels. For example, Briban is used by Natural Pest Control Pvt. Ltd in external/outside premises only because of its high mammalian toxicity and its high residual activity. This means that it will significantly kill humans if sprayed inside houses at an alarming rate. Furthermore, since it can withstand sun’s evaporative effect, it will be effective in the external premises since it will stay longer compared to other groups of insecticides. Actibiol and Ficam, on the other hand has been rated to be with low mammalian toxicity, if the concentrations are done properly. Lastly, always read the use of the pesticide given to you. Read the following attachment for more details.   Warning : All these pesticide products are hazardous to humans and other animals; it is important to always read and follow the instructions from the labels. “The label is the law”.   Evaluation of the control treatment : Monitoring is the key method to ensure success of the IPM System. It means that the accounts are inspected on regular basis by the Technicians or quality assurance person to determine if pest are present. Evidence of Pest should motivate the Pest Management Professional to reassess the program, identify areas overlooked and eliminate entry points to enhance program effectiveness.   Communication to the customer : This is an important step to success of the IPM System with the customer. It is an on-going process in the IPM System. The Entomologist must convince the customer that IPM will be effective when the programme are given sufficient time to work and when the conditions that encourage infestation are removed. The customer needs to be involved in improving sanitation, repairing structural deficiencies and monitoring for Pests.   Examples of Integrated Pest Management Principles Applied : Covering or dewatering an open water tank will control mosquito problem for more efficiently than regularly treating The water with a Larvicide. Making sure that all window screens are functioning properly, not torn and are tight fitting will prevent flies entering The building. Why let them in and take hours to die after they have come in contact with the Pesticides or Electronic Fly Killer? Quarantine all incoming items, inspecting them and washing where possible will reduce the risk of pests entering And proliferating within the building, cockroaches are commonly introduced in this manner, so why take the risk? Regularly cleaning under the food storage shelves will remove any potential food source for rats and mice. This Practice will also decrease use of rodenticide baits. Minimizing the brightness of night lights on the exterior of the building, and using yellow bulbs where possible, will Lessen the attractiveness of hundreds/thousands flying insects at night resulting in less flying insects inside the building.   Benefits of IPM Program : Less pests being encountered. Less Chemicals/Pesticides being used. Less call backs for the pest control contractor and less disruption to the clients operation. Actual clients customers satisfaction. Less risk of damage to food, equipment, health and property. Building and beneficial relationship with a valid client and reliable contractor. Cost effectiveness. Integrated Pest Management is a system approach to pest management and a decision making process that controls And prevents pest activity and infestation by combining several strategies to achieve long term solutions.

We provide high quality Food Safety Consultancy services to various small and large scale organisations involved in the fields of catering, food distribution, etc. Not only do we provide consultancy services, we also make one ready to pass the accreditation criteria with the help of certain tweaks. Our auditing techniques are flexible enough to accommodate every type of organisation.   Details : Natural Pest Control Pvt. Ltd has extended its consultancy services to raise food safety & quality standards in small, medium & large organizations involved in catering, food processing and handling, transport, poultry and dairy products. Our intention is to provide high quality of services to ensure the safety of your products and your customers. However after auditing, training and recommending, Natural Pest Control Pvt. Ltd will be able not only to provide you With these consultancy service but will allow you to be ready to obtain HACCP and other certification.   Food Safety Audits : Audits will be individually designed depending on the needs of your organization. Advice can be given for new Procedures and policy that will appear in your food safety documentation. A detailed report will be given to you after a Visit to your premises in which you should implement all recommendations given to you and your staff. All your staff will Be trained to facilitate the attainment of the HACCP & Other certification. Our consultancy will not be limited to your premises. We can also inspect your suppliers and provide an assessment Report following your own standards. To ensure an optimum persistence you must ensure they are supplying safe food by visiting their premises and inspecting documentation.   Food Safety Policy Development and HACCP : Production for our clients of a tailored food safety management system that can be adapted to any size of catering Operation from cook chill units to small restaurants. The system includes a comprehensive but easy to use procedures Manual backed up with onsite training in its use, access to help line support and regular coaching to ensure it does not Gather dust. This food safety program will be idealistic for an effective HACCP system. Hazard Analysis and Critical Control Point (HACCP) certification is synonymous with food safety. HACCP is a food Safety risk management system that addresses all type of hazards through anticipation and prevention rather than by a Finished product inspection. In addition to the consultancy program and certification issues, Natural Pest Control Pvt. Ltd as part of it 06 years of Services in public health will be serving you in the pest control and hygiene service ISO 22000 : 2005 :ISO 22000 is designed to allow all types of org. Developed with the participation of food sector experts, ISO 22000 Incorporates the principles of HACCP, and covers the requirements of key standards developed by various global food Retailer syndicates, in a single document. Another benefit of ISO 22000 is that it extends the successful management System approach of the ISO 9001:2008 quality management system standard which is widely implemented in all sectors But does not itself specifically address food safety. The development of ISO 22000 was based on the assumption that The most effective food safety systems are designed, operated and continually improved within the framework of a Structured management system, and incorporated into the overall management activities of the organization. With its Certified professionals instructors Natural Pest Control Pvt. Ltd clients will be assured of accurate information about this Standard and certification to the standard. Therefore they can be provided with certification against the ISO 22000.