Our Products
We offer Book Pressing Machine which is used in bookbinding process consists of a press screw which moves a floating platen up and down against a fixed platen. The platen faces screw to distribute the pressure from bottom point of contact with the press screw. The Book Pressing Machine is known as Dab Press, Hard Press, Screw Press, Two Pillar Book Press and Four Pillar Book Press. These are simple and easy to operate and long lasting.
Technical Specifications
Sizes in Two Pillars Body | Sizes in Four Pillar Body |
---|---|
10” * 15” | 18” * 24” |
12” * 18” | 20” * 30” |
15” * 20” | 30” * 40” |
18” * 20” | 32” * 60” |
Get access to highly efficient Hydraulic Book Nipping Press Machine that is meant for pressing the spine of book. The machine is effective for nipping the process of reducing / knocking out the swell in the spine of a thread sewn book-block. It is prepared for Hard-Case or Soft-cover binding adding in firmness, solidity and enhanced quality of the finished product book.
Technical Specifications
Book width |
310mm |
---|---|
Book Spine (Min.-Maxi.) |
10-110mm |
System Clamp Pressure |
3000 kg. |
Electrical Load Motor |
2.25 KW/3H.P. |
We provide Leaf Golden Silver Foil Printing Machine which is useful for the foil stamping on visiting, invitation, wedding, shagun, reception cards, diaries, leather, wallets, stickers, stationery products like books, notebooks, catalogs, broachers and other related articles. This machine prints with the help of heat transfer. The Leaf Golden Silver Foil Printing Machine is useful for foil printing. The table is moveable for easily placing and taking printing product. On the top side of machine, a heaing chase is fixed. Machine also contains mechanical auto feed attachment which is used for rewinding foil roll. Hand lever is useful for head movement up and down. The machine runs very smoothly; long time running and easy to perform.
Technical Specifications
Machine Size | Printing Area | Heating Load | Working Table Size |
---|---|---|---|
2” * 4” | 2” * 4” | 0.5 Kw | 8” * 10” |
4” * 6” | 4” * 6” | 0.75 Kw | 10” * 12” |
6” * 8” | 6” * 8” | 1 Kw | 12” * 14” |
8” * 10” | 8” * 10” | 1 Kw | 14” * 16” |
10” * 12” | 10” * 12” | 1.25 Kw | 16” * 18” |
12” * 15” | 12” * 15” | 1.5 Kw | 18” * 21” |
Our Book Stitching Machine with robust construction and nice outlook is synonymous of higher efficiency and accuracy. It is meant for stitching the books, booklets and currency notes. The machine gives higher rate of efficiency and accuracy at highest speed. It is distinguished in terms of simple mechanism and remarkable exterior presentation. The machine is most simple in terms of operation, clean formation of staples. The Book Stitching Machine is most suitable for higher rate of performance and commercial production without any wastage of material and time. The machine gives long life and is most economical for space requirement with a negligible upkeep cost.
Technical Specifications
Maximum Stitching Capacity | 5/8"(16 mm) 330 Page |
---|---|
Stabbing | ¾” (19 mm) |
Stitching Wire Round (S.W.G.) | No. 21 to No. 24 |
Speed | 200 staple/minute |
Staple Crown Size | 12.5 mm |
Power required | 1/2 H.P. Single/Three Phase Motor 1440 RPM |