For determination of flash point of petroleum products and mixture having a flash point
below 49c (120 F) the apparatus consists of one brass cup fitted with test flame
arrangement. Stirrer placed on a water bath made a cooper.
The outer jacket of the water bath is fitted with a stand.
for electricity heated apparatus a 500 watt heater is fitted to the stand which can be
controlled by an energy regulator

TECHNICAL SPECIFCIATION:

• Used for Manual Aspiration procedure (Medical termination of pregnancy)
• Made from medical grade polypropylene
• Kit consists of MTP Syringe, Karman Cannula, lubricating oil
• The MTP Syringe provides high vacuum suction during abortion procedure
• Smooth cannula with rounded tip and smooth eyes for atraumatic canniulation
• Available in single valve and double valve syringe
• Karman Cannula SMD 800 available separately as well in size 4mm 12mm
• Used for Manual Aspiration procedure (Medical termination of pregnancy)
• Made from medical grade polypropylene
• Kit consists of MTP Syringe, Karman Cannula, lubricating oil
• The MTP Syringe provides high vacuum suction during abortion procedure
• Smooth cannula with rounded tip and smooth eyes for atraumatic canniulation
• Available in single valve and double valve syringe

Karman Cannula SMD 800 available separately as well in size 4mm 12mm

TECHNICAL SPECIFCIATION:

• High accurate sensor technology
• Life-span is longer than 10 years.
• Novel and beauty operate easily.
• Accuracy: 0.01Kg
• Measure range:30g30Kg

Specification

• Overall size: 180L x 60W x 46H cms.
• Framework Made-up of Rectangular / Square M.S. Tubes.
• 5cm foam padded fixed mattress covered with rexine
• Legs fitted with PVC Stumps.
• Finish: Pretreated & Epoxy Powder Coated.

FEATURES:-

1. 1.5 Litre Mirror Polished Stainless Steel Body2. Cordless Electric kettle3. 360 degree Rotation Base4. Automatic Shut Off when Water Boils5. ON/OFF Switch, Indicator Light6. Boil Dry & Overheat Protection7. One Touch Cover Open8. Inbuilt Filter9. Water Level Indicator10. Boil Water, HOT Milk, Make Tea-Coffee

Specification

• Tubular Head and Foot Bows of unequal height with vertical tube support.
• Framework Made-up of M.S. Tubes.
• Top made-up of Oval perforated CRCA M.S. Sheet.
• Legs fitted with PVC Stumps.
• Four Location for I.V. Rod.
• Finish: Pretreated & Epoxy Powder Coated.
• Overall Approx. Size: 2090L x 910W x 600H MM

TECHNICAL SPECIFCIATION:

• Base approx size 34*26cm.
• Stainless Steel base mounted on 4 rubber bush.
• Jar: Glass/Polycarbonate 750ml capacity.
• Easy viewable gauge.
• Handle to easy carry.

TECHNICAL SPECIFCIATION:

• Microprocessor based servo controlled temperature system
• Control mode: Air mode
• Humidity is adjustable in two grades
• Set temperature, air temperature, heating power are displayed
• Separately by LED
• Self - testing function, various failure alarms by audible and visual
• >37 temperature set function
• Triple protection for over temperature with separate cut off device,
• More safety system
• The inclination of infant bed is adjustable
• Single wall hood, 4 operating windows and 2 iris ports
• RS232 connector
• Bracket with stand;

TECHNICAL SPECIFCIATION:

• Approx, dimensions 72 (L) x 22 (W) x 30 (H)
• Rectangular & square tube frame work mounted on PVC stumps
• Three sections cushioned top
• Backrest, seat, section adjustable by hand lever
• Complete with SS bowls
• Height adjustable a pair of knee crutches
• Pre treated & epoxy powder coated.

As per IP 31 the apparatus Consists of Brass Sleeve and case with metal cup and a glass Boiling tube with Crok fitted to a bath 600 ml beaker is provided. The assembly is kept on heater with energy Regulator control and stand with F.H.P. elect Stirrer.As per IP 132 the unit Comprises a glass beaker with fiber Cover together with glass test tube with three indentations to receive Chromium plated brass cup. Cork for tube and a 1.5 mm diameter Brass rod. The assembly is kept on heater with energy regulator and stand with F.H.P. motor stirrer.

With our extensive experience in the sphere of manufacturing and exporting technically advanced scientific instruments, we have been able to design and develop precision engineered array of Fully Automated Coagulation Analyzers. Making use of excellent grade components and advanced techniques, these are manufactured as per the industrial advancements so that clients receive analyzers with advanced features and functionalities.

Model No 1 Spot cum Examination Light Floor Chrome BaseModel No 2 Spot cum Examination Light Floor Plastic BaseModel No 3 Sport cum Examination Light Wall Mount

Technical Specification :Lux @ 50 cm 10000Arm Flexible Goose NeckTransformer IntegratedVolt 12 VWatt 50 W

Our organization is an eminent name, which is engaged in offering an unparalleled array of Suction Apparatus. Precision engineered, these apparatus are made available in cabinet model with stainless steel top mounted on all bearing castor wheels, complete with pressure regulator h. p.

Design specifications:

• Incorporated with motor connected to a highly efficient all immersed pump mechanism
• Contains a suction bottles with cannula & tubbing
• Suitable for operation on 220/230 volts
• Available with provision of attachment of foot switch of 50 circles and single phase AC

Owing to our long years of experience in the industry of creating high quality products, we have been able to manufacture an incomparable array of Carbon Sulphur Apparatus. Precision designed, the range is widely used to detect percentage of carbon and sulphur in iron and steel. Made in compliance with industry defined standards, the scale of these apparatus burette is directly calibrated in terms of carbon percentage.

Other information:

• Detect carbon percentage up to 4. 5%.
• With use of interchangeable burettes, the measurement can be taken to 0. 25%, 0. 5%, 1. 5% and 4. 5%
• The furnace is designed in such manner that it attains required temperature rapidly A high accuracy digital pyrometer is used to indicate the furnace temperature

Oxygen index apparatus consists of a test chimney made of borosilicate glass suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of u shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with thermocouple for the measurement. A copper tube with suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer is also mount in the instrument.

Two rotameter with needle valve are provided to control and measure oxygen and nitrogen flow in the test chimney. A timer for indicating the time of burning with a reset switch. The rotameter, temperature controller, timer are fitted in the sheet panel. The test chimney is fitted separately on the metallic platform. Gases, gas cylinders and its fittings are not provided with the equipment and have to be arranged by the purchaser.

Our organization is instrumental in manufacturing and exporting a durable and reliable range of Crackness Tester (Apparatus). Designed and developed in strict compliance with industry defined standards, the range is offered with following specifications:

• A clamp device, which rigidly holds one end of the test piece
• A mandrel of the desired diameter and a roller of diameter 25mm, which make contact with the flesh and the grain surface respectively of the middle portion of the test piece, across its full width
• The axes of both the mandrel is fixed relative to the clamp, the axel of the roller is attached to a handle pivoted at the axis of the mandrel
• It consists of a horizontal base plate to which is rigidly attached a shouldered spigot whose narrow part has the diameter of the smallest mandrel
• The circular hole in the handle fits over, which thus acts as a pivot
• A mandrel of the desired diameter fits
• A roller of diameter 25mm is carried on a vertical axel fixed to the handle in such a way that its distance from the circular hole may be set at any value desired
• The test piece clamp is attached to a slotted strip, which allows its position relative to the base plate to be varied
• All the mandrels are made of stainless steel and the other parts are either painted or chrome platted to give a corrosion resistance long life

Automatic wheelchair type stretcher is mainly used to
transport the sick, wooded outdoor. It's a necessary
accessory on ambulances and could be folded as
wheelchair in narrow stairs or elevators. This model is
made of high quality aluminium alloy, with characteristics
such as light weight, good appearance, reasonable
configuration, convenience operation, antisepsis. Besides,
it also can prevent rust and easy to clean. It has soft foam
mattress on the surface and protecting block sidely. It's an
easy operation stretcher.

TECHNICAL SPECIFCIATION:

• Portable pressure steam sterilizer
• This stainless steel portable pressure steam sterilizer is a kind of pressure
• Steam as the medium of sterilization equipment. For medical units, surgical
• Instruments, dressings and glassware sterilization.

Features:

1. Using microcomputer control, induction operation.
2. Sterilization process dynamic display, LED digital display indoor temperature, time and fault code alarm.
3. Manual water injection, drainage, heating, sterilization, exhaust automaticcontrol.
4. Temperature sensor control, precise control of sterilization indoor temperature.

1. Over-temperature automatic protection device, door safety interlock device, overpressure automatic pressure relief valve, short circuit protection, overvoltage protection, Thermal insulation protective cover.

Technical Parameters:

1. Internal heater elements
2. Digital LED screen and automatic control, inductive panel;
3. With cover;
4. Full SUS304;
5. With overheat protector and alarming system;
6. Chamber:SUS304 stainless steel, round chamber, 16000cycles/8years;
7. Working pressure 0.142Mpa;Maximum operating temperature126

Product order number

1. Dimensions (L * W* H) Internal chamber size ( *L)

Volume power Voltage net weight

1. BK24-03 430*394*750mm
2. 280*415mm
3. 24 2.2kVA 220V, 50 Hz
4. 25kg

Specification

• Overall Approx. Size : 1830L x 50OW x 820H mm.
• Body frame work made of 18G CRCA Sheet
• Backrest adjustable on gas spring
• 3 Drowers, 3 Cabinets, One 6P appratas

Nidek Medicals Nuvo Oxygen Concentrator Carries forword our commitment of providing reliable ,

Cost effective and quality products .

An oxygen concentrator is a machine that generates medical oxygen. it runs on electricity and the only maintenance required is the regular cleaning of filters.

The nuvo ocygen concentrator has been designed to provide a combination of enhanced features,

Reliability of a proven technology and unsurpassed quality.

• Liter flow 1 to 8 lpm
• Ideal for high flow patients
• Low maintenance costs
• Made in the usa

Additional Features

• Built on the Reliable Nuvo Platform
• Easy Access to filter , battery , and houmeter
• Superior grade of molecular sieve
• Spring mounted high efficiency Thomas nexus compressor

Features:

• Compact & handheld design;
• Unique algorithm for accurate FHR detection
• Large backlight LCD display'
• Interchangeable waterproof probe
• Real-time, average and manual working modes;
• FHR alarm limits are adjustable and can be saved;
• Low power consumption design;
• Automatic power-off for power-saving;
• Buckle design for easy carrying.

Our organization holds expertise in offering a precision designed range of Laser Imager Drypro, which is widely recognized for its fastest printing speed, user friendly designs, excellent print results, image clarity, low maintenance and longer service life. Considered as one of the worlds smallest laser printers, these are offered in standard as well as customized specifications based on the diverse requirements of the clients.

Highlighting attributes:

• Worlds smallest laser printer
• Worlds fastest first printing time( less than 50 sec )
• High printing speed: more than 90 plates / hour
• User friendly design
• High quality image printing
• 14 bit output gradation level for better density
• Available in single & 2 tray option
• Upgradeable design

Specification

• Stethoscope cardio, double side.
• Chestpiece with diaphragm on both sides.
• Good Sound transmission.
• Suitable for both adult & Pediatric.
• Made of Aluminium.

We hold expertise in manufacturing and exporting superior range of Glass Distillation Apparatus, which is used for availing pyrogen free distilled water. Carefully designed making use of stainless steel, different parts of the apparatus includes main chamber, condenser tube, condenser jacket, vapor baffle and constant level arrangement for inlet water.

Available in capacity up to 20 ltrs/hr, the range comprises:

• Superior design vapor baffle, which avoids splashing of water delivery tube and the lid rests in ensures minimum (negligible) loss of steam.
• By removing the wings, which hold the condenser and jacket together, the condenser tube can be dismantled easily
• If the still runs dry, the immersion type heaters can displace the connectors. Moreover, it is recommended to avoid the still running dry as the protective arrangement cannot be expected to last normally beyond three operations and hence reduces the life of the instrument
• The still is provided with bracket (to be fixed on wall) on which the still can rest.

Extremely powerful, effective medication delivery

One - button operation, easy carry handle, ideal for all ages

Power AC230V, 50 HZ/60Hz

Medication Capacity 5ml

Sound Level around 60 dBA

Maximum Medication Capacity 13ml

Average Nebulization Rate Min. 0.2ml/min.

Compressor Pressure Range 30 - 36 psi (210 to 250 Kpa/2.1 to 2.5 bar)

Operating Pressure Range 8 - 16 psi (50 to 100 Kpa/0.5 to 1.0 bar)

Liter Flow Range 6 - 8 lpm

Standard accessories Dependable compressor, Nebulizer, Air Tube, Angled Mouth Piece, 5 Air Filters, Connecting Tube

Specification

• 3.5'' TFT screen
• 12 leads simultaneous display
• Thermal printing system
• Power supply both AC and DC
• High capacity built-in lithium rechargeable battery
• Battery power supports continually record 150 pieces of ECG
• Built-in Database
• Store more than 1000 pieces of archive
• Digital signal processor for filter
• Auto-measurement, auto-analysis and auto interpretation functions
• Sensitivity choice : 2.5, 5, 10, 20, 40mm/m V. Standard Sensitivityis 10mm/mV0.2mm/mV
• Measurement parameters: HR, P-R interval, P-Duration, QRS Duration, T Duration, Q-T interval, Q- Tc, P Axis, QRS Axis, T Axis, R(V5), S(v1), R(V5)+S(v1)
• Product safety type:Class 1.Type CF, there is defibrillation and pacing protection circuit.
• Enduring polarization voltage:300mV
• Noise level:

Device for quick and convenient

device for 100 tablets, 9.5mm perforations

Made of aluminum sheet and provided

with a pouring lip and handle.

Transparent Anaerobic Culture Jar of 3.5 lit. capacity which is made of Polycarbonate. The lid of the jar is made of Aluminium Pressure die casting fitted with Pressure valve, Vacuum valve, Safety valve & Compound Pressure cum vacuum gauge, three finger aluminium clamp and sealing "O" ring and Air/Gas chuck.
This is recommended only where inside condition of air of jar is removed thru vacuum pump and CO2is filled in the jar thru CO2gas cylinder to generate anaerobic conducting in the jar.
Also Supplied with Plain aluminium Pressure die casted lid which can be fitted when readymade gas packs are used to generate the anaerobic conditions inside the jar.

Supply as above and completed with following accessories

• Petri Plate Carrier, Stainless steel, for 10 petri Dishes.
• Test Tube Carrier, Stainless Steel.

• 220V / 50 Hz. AC.

Specification

• M.S. Frame
• Approx. S.S. Bowl of 350 mm dia/SS Bucket
• Frame work made of MS tubes
• Mounted on 50mm castors

Specification

• Ward care Suction Unit
• Powder Coated MS chassis
• Noise level of suction apparatus is 50 dB 03 dB
• Electrical requirement - 220 230VAC, 5 0Hz, 1 Phase
• Ideal for medical & surgical procedures
• Rotary Vane or Diaphragm Vacuum Pump
• with-710 +/.10mm Hg
• Free air displacement 25 30 Ltrs / min
• Heavy duty HN - 50 antistatic castors
• 180Watt, 1440 RPM, 0.25 H.P. Electric Motor
• 76mm Vacuum Gauge
• Non collapsible PVC tubing
• 2 x 1.5 Ltrs. Polycarbonate jars with overflow safety
• Bacterial filter fitted on top
• All parts coming into Contact with secretion are autoclave safe

DESICCATOR (PLAIN) Plain Desiccators are physically the same as Vacuum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

Material:Polypropylene/Polycarbonate