Other Products / Services #177164

Water contaminated with bacteria is a major cause of water-borne disease in humans. Enteric diseases like diarrhoea, dysentery, typhoid, paratyphoid, gastroenteritis, cholera, etc. are caused by the tiny menaces viz bacteria.

Detecting these dangerous but unseen predators is quite a tough task. Normally it is the domain of the white coated microbiologist who works admist sterile conditions and a lot of hush secrecy.
No longer, modern science has now made testing so easy and convenient.
checkNsee tests a group of bacteria, which are found in sewage. They are present in the intestine of man and animal and are generally accompanied by the harmful disease causing bacteria. chekNsee helps to check water from all kinds of sources viz, taps, purifiers, coolers, storage tanks, rivers, ponds, springs etc.,

This extremely simple and convenient test can be carried out by anybody, anywhere i.e. homes, offices, factories, shops, banks, hospitals, hotels, schools, etc.

checkNsee detects the coliform group of bacteria.

Benefits

M.O.C

NNCS-Mesh, mist eliminators are porous blankets of metal wire or plastic knitted mesh, designed and constructed for the efficient, economical removal of entrained liquid droplets from vapor streams.

NCS-MESH Pads can be fabricated in any required size and shape and may be installed in new or existing process vessels.

HOW IT WORKS

When vapor and entrained liquid droplets pass through a NCS-MESH mist eliminator, the vapor moves freely through the mesh pad but the liquid droplets, due to their greater inertia, cannot make the necessary sharp turns and as a result are thrown into contact with the wire surfaces and briefly held there. As more droplets enter the pad and collect on the wires, they grow in size, run down the wire to the bottom surface of the mesh separator and fall from the unit. Overhead vapor is now free of entrained liquid.

Catridges are basically designed for final filterations. Polypropylene is selected for its high chemical resistance, this are basically one time use Catridges. These Catridges are free of surfactants, resins and binders. They are available in nominal lengths of 10", 20" & 40" and an outside diameter of 2.5"

Available in 1, 3, 5, 10, 20, 35 microns ratings.
Maximum Temperature of 60C.
Note:
It is advisable to use as low a flow rate as possible in order to optimise catridge life and efficiency.

Catridges are basically designed for final filterations.
Polypropylene is selected for its high chemical resistance, this are basically one time use Catridges. These Catridges are free of surfactants.
They are available in nominal lengths of 10", 20"& 40" and an outside diameter of 2.5".
They are available in micron ratings from 1, 5, 10, 20, 30, 50, 75, 100 micron ratings.

They have a high void volume resulting in low clean drop in pressure and have excellent dirt holding capacity. They withstand a temperature of upto 80C.

Catridges are basically designed for final filterations. Polypropylene is selected for its high chemical resistance, this are basically one time use Catridges. These Catridges are free of surfactants. They are available in nominal lengths of 10", 20"& 40" and an outside diameter of 2.5". They are available in micron ratings from 1, 5, 10, 20, 30, 50, 75, 100 micron ratings. They have a high void volume resulting in low clean drop in pressure and have excellent dirt holding capacity. They withstand a temperature of upto 80C.

Pleated Catridges are selected for the following advantages:

Available in 1, 3, 5, 10, 20, 35 microns ratings. Maximum Temperature of 60C. Note:It is advisable to use as low a flow rate as possible in order to optimise catridge life and efficiency.

Resin Bonded Catridges have distinct advantage in the following:

• Consistent Particle removal.
• Extended Catridge life.
• Ability to withstand high tempratures.
• Ability to withstand elevated differential pressures.
• Broad chemical compatibility.
• Easy disposal.
• Easy of installation and removal in high temperature applications.