Jalandhar, Punjab, India
GST : 03AAAFN6433A1Z0
Verified
Add Review
Our Products
Our company is a well-known Manufacturer, Exporter and Supplier of Rough Top Rubber Conveyor Belts. They are used for transporting light weight goods, either being inclined or being horizontal. Also, they are suitable for transporting fragile or deformed materials and packed goods at an angle from 15 to 35 degree. Our Rough Top Rubber Conveyor Belts makes less friction coefficient making it ideal for running over table and flat panel. They are non-toxic and odorless in nature. Further, we provide Rough Top Rubber Conveyor Belts at very feasible prices.
Construction and Properties
2or3-Ply construction with cut edges and a carcass of synthetic EP fabric. The surface texture resists the tendency for the material to roll back down the conveyor. The black top cover is recommended for utility type incline service while the tan cover is suggested for transporting packaged food products where an odorless , non-toxic , non- marking belt is a necessity. Top cover is a full 1/8* thick SBR and the back is protected by either a durable friction surface bottom or a synthetic bare-back for slider bed applicatons.
Our R.T. Belt Standard Specification
| Type | No. of Ply | Top Cover | Bottom Cover | Standard Length | Color | Standard Width |
|---|---|---|---|---|---|---|
| A | 2 Ply | 1/8'R.T. | Bare Back |
200mm Per Roll |
Black or Tan |
1350mm - 1500mm Cut Edge |
| B | 2 Ply | 1/8'R.T. | 1/16' | |||
| C | 3 Ply | 1/8'R.T. | Bare Back | |||
| D | 3 Ply | 1/8'R.T. | 1/16' |
Technical Characteristics - Sectional Dimensions & Sizes (All Sizes In MM)
| Section | Top (TW) Width | Thickness (mm) | Angle | Range of Pitch Length mm LW/L | Diff. in Length | Absolute Min. Pulley | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| L1-LP | LP-LA | LI-LA | Dia | Depth | Groove Angle | |||||
| SPZ | 9.5 | 8.0 | 40 | 380-3550 | 37 | 13 | 50 | 63 | 11.0 | 38+0.5 |
| SPA | 12.5 | 10.0 | 40 | 750-4500 | 45 | 18 | 63 | 90 | 12.8 | 38+0.5 |
| SPB | 16.0 | 13.0 | 40 | 1250-8000 | 60 | 28 | 88 | 140 | 17.5 | 38-0.5 |
| SPC | 22.0 | 8.0 | 40 | 380-8500 | 36 | 14 | 50 | 75 | 11.0 | 38+0.5 |
| A | 13.0 | 8.0 | 40 | 380-5800 | 36 | 14 | 50 | 75 | 11.0 | 38+0.5 |
| B | 17.0 | 11.0 | 40 | 480-1400 | 43 | 26 | 69 | 125 | 14.0 | 38+0.5 |
| C | 22.0 | 14.0 | 40 | 625-1400 | 56 | 32 | 88 | 200 | 18.5 | 38+0.5 |
| D | 32.0 | 19.0 | 40 | 1120-15190 | 79 | 40 | 119 | 355 | 25.0 | 38+0.5 |
| E | 38.0 | 23.0 | 40 | 3550-17750 | 92 | 53 | 145 | 450 | 30.0 | 38+0.5 |
| O/Z/M | 10.0 | 6.0 | 40 | 350-3800 | 22 | 16 | 38 | 60 | 8.5 | 38+0.5 |
| SP20 | 20.0 | 2.5 | 40 | 1600-5000 | 60 | 28 | 88 | 150 | 16.0 | 38+0.5 |
| SP25 | 25.0 | 16.0 | 40 | 1600-12000 | 65 | 35 | 100 | 225 | 20.0 | 38+0.5 |
| 3V | 9.7 | 8.0 | 40 | 380-3500 | 37 | 13 | 50 | 63 | 10.0 | 38+0.5 |
| 5V | 16.0 | 13.5 | 40 | 1960-12000 | 60 | 25 | 85 | 140 | 17.5 | 38+0.5 |
| 8V | 25.4 | 23.0 | 40 | 1750-12500 | 92 | 53 | 145 | 250 | 28.0 | 38+0.5 |
| Section | Force (N) | Deflection 0.0115 per MM of Span |
|---|---|---|
| SPZ | 67 to 95/100 to 140 | 1.0 to 1.5 1.5 to 2.5 |
| SPA | 100 to 132/140 to 200 | 1.5 to 2.5 1.5 to 2.5 |
| SPB | 160 to 224/236 to 315 | 1.5 to 2.5 1.5 to 2.5 |
| SPC | 224 to 355/375 to 560 | 1.5 to 2.5 1.5 to 2.5 |
| A | 80 to140 | 1.5 to 2.5 |
| B | 125 to 200 | 1.5 to 2.5 |
| C | 200 to 400 | 1.5 to 2.5 |
| D | 355 to 600 | 1.5 to 2.5 |
| E | 600 to 900 | 1.5 to 2.5 |
| Type | N/MM | Plies | Covers | Oil & Fat Resistant | Belt Thickness |
|---|---|---|---|---|---|
| 4000/3 | 400 | 3 | 1+1 | Limited | ca. 5mm |
| 4000/4 | 400 | 3 | 2+2 | Yes | ca. 7mm |
| 500/4 | 500 | 4 | 1+1 | Limited | ca. 6mm |
| 500/4 | 500 | 4 | 2+2 | Yes | ca. 8mm |
| 630/4 | 630 | 4 | 1+1 | Limited | ca. 7mm |
| 630/4 | 630 | 4 | 1+1 | Yes | ca. 7mm |
| 630/4 | 630 | 4 | 2+2 | Yes | ca. 9mm |
| 800/5 | 800 | 5 | 1+1 | Limited | ca. 8mm |
| 800/5 | 800 | 5 | 1+1 | Yes | ca. 8mm |
| 800/5 | 800 | 5 | 2+2 | Yes | ca.10mm |
| 1000/5 | 1000 | 5 | 1+1 | Limited | ca.8mm |
| 1000/5 | 1000 | 5 | 1+1 | Yes | ca.8mm |
| 1000/5 | 1000 | 5 | 2+2 | Yes | ca.10mm |
Transmission belts find wide area of application in varied industries as textile, paper, pharmaceutical, food processing, engineering and other allied industries. We are well reckoned as one of the supreme rubber transmission belts exporters and suppliers in India. These belts are approved by the Punjab Govt.
These power transmission belts are available in two edges:
Cut Edge from 25mm to115O mm width.
Round Edge from 25mm to 20Omm width.
Quality Marketing Scheme :
| Ply Construction | Nominal Thickness of Belt (mm) |
|---|---|
| 3 | 4.0 |
| 4 | 5.1 |
| 5 | 6.5 |
| 6 | 7.5 |
| 8 | 10.5` |
| 10 | 13.0 |
We are engaged in manufacturing, exporting and supplying Steel Cord Rubber Conveyor Belts. Our Steel Cord Rubber Conveyor Belts consist of galvanized steel cord and core rubber which possesses superior adhesive property. Their body is covered with top and bottom rubber layers. Steel cord of our belts is composed of left and right twisting wire. It is arranged evenly and longitudinally in the belt. We make available our Steel Cord Rubber Conveyor Belts in various strengths and specifications at highly competitive prices.
Availability : Up to 2400 mm width
Types of Cords used
Cord configurations available : 7 *7 , 1*19+7*7 , 7*19 etc
Avail from us supreme quality Light Duty Rubber Conveyor Belts. Precisely designed using optimum grade raw material and ultra-modern technology, the Light Duty Rubber Conveyor Belts are available in numerous sizes up to 2500mm. They are developed with bare top and bottom without friction on the fabric in 2 Plyies and 3 Plyies for light duty material handling purpose. We provide Light Duty Rubber Conveyor Belts at budgetâfriendly prices.
Chevron Rubber Conveyor Belts are designed by our skilled engineers using optimum grade raw material and modern technology. Ensuring optimum grip to their handling material, Chevron Rubber Conveyor Belts find wide application in industrial conveyors for conveying of packed and unpacked material. Resistance to abrasion, long service life and flexibility due to homogeneous Chevron profiles are the prime features of Chevron Rubber Conveyor Belts. They prevent load slip or product roll owing to their precise design.
