netlink technologies

RC Dutt Road, Vadodara, Gujarat

Fiber Optic Tools & Measurement devices are handheld high quality equipments to use in various application as well as installation procedure of Fiber Optic in Field Termination and Splicing. With use of these Tools, fiber can easily splice/terminate with minimum dB loss. The Tools are imported from Taiwan, high precision and accurate, long life durability. You can trust being a field installer on these Tools and Measurement devices.

These tools even help you in fault finding and easy trouble-shooting. Application driven and proven products, mainly useful for all System Integrator to use these tools/devices for their end customer projects.

Open Type Cable Managers are Metal Frame with Plastic ABS D-Rings Combination with Front to Rear Cable through Slot in Metal Base Plate. This ABS D-Rings are special design to save fingers of installed Engineers from cutting in typical Metal Rings, give ease for Cable Dressing IN & OUT.

Netlink introduce PVC Channel Box type 19" Cable Manager 1U for Network Rack, cabinet and enclosure. Two variants available - 55mm H and 80mm H. It has heavy duty Carbon Steel Black Matt finish MS Plate at the bottom with 2/3 Long span Capsule slot for easy cableIN/OUT. Front and Back Options also available for open rack installation. 24-Slit Cable Managers are having individual 24/22 Slim Slit to accommodate every Patch Cord line-2-line dressing with Network Switch, looks very neat and clean. The Slit space is best suitable for CAT-6 and CAT-6A Patch Cord

Specially Developed DIN STD. RACK Hardware Cap Screw M6X20 Point Head with Steel Cage Nut M6 are available at very attractive rate.

Netlink introduced 19" Fixed Tray/Shelf, 1U Cantilever Front Mount. Cold rolled steel with black finish. Heavy duty ideally suitable for both Wall Mount as well as Floor Standing Racks for all of your IT / telecommunications needs. Store Equipments on shelves on your Network Rack today !!! Front Mounting 1U Height only with Weight capacity 1015kg support.

This Single Mode Patch Cords are available with Yellow LSZH 2mm and 3mm Jacket with pre-define length ex-stock available. The end connectors are ST, SC and LC type. Mostly they are PC type and we also offer APC type polishing end connectors in SC and LC both type. Customized length also available on demand. Duplex Patch Cords are available in Simplex X 2 end connectors to ease in installation and reverse the polarity while connecting fiber devices

This Multi Mode Patch Cords are available with Orange LSZH OM2 50/125 - 2mm and 3mm Jacket. The pre-define length is 3Mtr., which is ex-stock available. The end connectors are ST, SC and LC type. The end connectors are UPC Universal polish type. Customized length also available on demand. Duplex Patch Cords are available in Simplex X 2 end connectors to ease in installation and reverse the polarity while connecting fiber devices.

This Multi Mode Patch Cords are available with AQUA OM3 LSZH 50/125 - 2mm and 3mm Jacket. The pre-define length is 3Mtr., which is ex-stock available. The end connectors are SC and LC both type only. The end connectors are UPC Universal polish type. Customized length also available on demand. Duplex Patch Cords are available in Simplex X 2 end connectors to ease in installation and reverse the polarity while connecting fiber devices.

We have Single Mode as well as Multi Mode in 1.25G range of products which support all major brands available in market with specific band code programmed in EPROM. It has DOM/DOMI = Digital Optical Monitoring interface to check its status of Temperature, Voltage, Bias Current, TX Power, RX Power during Operation. Multi Mode module support upto 2km where as Single Mode Module support upto 20km. Longer distance available on special request.

This 10G Module having Single Mode as well as Multi Mode both option available. It has LC interface, Duplex type module which support all major brands available in market with specific band code programmed in EPROM. Multi Mode SR+ module support upto 300m where as Single Mode LR+ Module support upto 10km

An Economical way to extend the distance up to 550m (Multi Mode) and 20 Km (Single Mode) of remote Gigabit network nodes by converting Cat5/6 UTP Ethernet to Fiber Optic while still maintaining the existing infrastructure. Converts UTP Gigabit Ethernet to Fiber OpticCost-effective solution for extending networkAutomatic MDI/MDI-X configurationHalf or Full Duplex OperationAuto-Senses 10 / 100 / 1000It has one 1.25G SFP Fiber Port and One 10/100/1000Mbps TX Twisted Pair Port. SFP Module seperately purchase and insertable on slot

The Media Converter complies with IEEE 802.3z, IEEE 802.3AB Standards. It is designed to convert data signal between 10/100Base-T and 100Base-FX Fast Ethernet. It supports 10/100Base-T and 100Base-FX applications. The Converter is equipped with 2 single fiber optic connectors (One for transmitting-TX and another for receiving-RX) and one RJ-45 Jack and one external pwer supply receptacle. Six LED indicators are built-in for easy diagnosing and monitoring the status of power, Unshielded Twisted Paired (UTP) Link, UTP Activity, Fiber Link, Fiber Activity, Full duplex and data rates. It can be configured automatically for Full Duplex or Half Duplex operation. It is compact, cost-effective, low dissipative, high reliable and stable. It can be used in standalone applications

Handheld Optical Power Meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. It features ingenious appearance, wide range of power measurement.

Pen-design Visual Fault Locator (VFL), Pen-size and light weight, specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks.

This High Precision Optical Fiber Cleaver is a new generation product , it's extremely light and reliable cleaver for the construction of optical network , Designed for excellent portability, the fiber cleaver is ideal for FTTx applications.