Write a Review
Our Products
We offer the best product range of HGX Pumps, Wound Close Type Motot, Open Type Cage Motot, Spectrum Cage Closed Motor and Cage-Closed-Type Motor.
PRIME Movers:- Diesel Engines of 12/24 V battery operated with various cooling options such as Radiator Cooled/Heat Exchanger cooled etc., Electric Motors:- 380/415/690/3300/6600V AC Motors
Standards/ Approvals
TAC/NFPA 20/ FM Approved/ UL Listed
HGX Series pumps are the most efficient and economic range of flange and foot mounting type positive displacement rotary gear pump. HGX series pumps have single helical shrink fitted gear pair and hardened and grind finished shaft. Ultra bronze sintered bushes ensured smooth running. It is perfectly designed and constructed, which increases the life and performance of pump. These pumps are similar to the HG type in construction. Thus the suction and delivery connections are available in sizes from 1/4 to 1 . These pumps can be operated up to pressures of 10 kg/cm with 2.5 LPM to 125 LPM flow capacity. They are designed to run at 1440 RPM and suitable for use with liquids up to a maximum of 200C & a viscosity of 50, 000 SSU.
New India offers Low Voltage Slip Ring electric motors ranging from 3.7 kW to 350 kW in Enclosed (Totally Enclosed Fan Cooled IP55) construction. Our Wound closed type motors have the same qualities of our Wound open type motors with additional enclosure construction that makes it very safe to use in dusty environments too. The design also takes care of the cooling and operation under rigorous conditions. Motors comply to IS standards. Specially designed motors are offered with IPSS standards to meet the requirements of Steel Plants. Motors are designed especially for applications with high inertia loads. It has reliable, rugged design and construction. Motors are suitable for starting with external resistance in motor circuit. Applications include Fans, Compressors, Mixing and Rotary Mills, Crushers and Pulverizers.
| Designed specially for applications with high inertia loads. |
| Reliable Rugged design and Construction. |
| Low Noise and Vibration. |
| Suitable for Direct/Belt Driven Applications. |
| Bi-Directional Rotation. |
| Optimum fan design for better cooling. |
| Rigidly sealed Terminal box. |
| Suitable for starting with external resistance in motor circuit. |
Cage-Open Type motors are specially designed for very safe environment with IP23 protection where IP55 protection is not required, thus reducing the capital cost of motors. Motors are offered in Low Voltage & High Voltage variants. Owing to efficient Design and Construction, motors have a High output to weight ratio. Motors are Reliable, Rugged and have Low Noise and Vibration. Motors are suitable for Pumps, Compressors and Fans. Low Voltage motors are offered from 15 to 250KW and High Voltage motors are offered from 250KW and above.
| High Output/Weight Ratio. |
| Reliable Rugged design ad Construction. |
| Low Noise and Vibration. |
| Cast Iron body. |
| Optimum fan design for better cooling. |
| Rigidly sealed Terminal box. |
| EC grade Di-Cast Rotor. |
| Suitable for Direct/Belt Driven Applications. |
| DOL/Star-Delta Starting. |
| Bi-Directional Rotation. |
New India offers Energy Efficient LV Aluminum & Cast Iron motor range with outputs from 0.18 kW to 375kW in frame sizes 63 to 355. Motors are suitable for a diverse range of applications from Pumps, Fans, Conveyors, Compressors, Crushers, Machine Tools, Material Handling & Crane, Roller Table Drives etc. in various industries. Our motors have withstood many applications having adverse operating conditions including Repeated Starting, Occasional Overloading & Other Severe Conditions & Applications.
We follow the highest manufacturing processes & practices. Motors with IEC & NEMA standards are offered with efficiency class IE1, IE2, IE3.
| Inventor Duty. |
| IE2/IE3/EFF1/EFF2 Motors. |
| Energy Efficient and therefore are ideally suited for power intensive, process and other industries. |
| Class F insulation with class B temperature rise limit. |
| Suitable for DOL starting up to 100 frame and DOL / STAR-DELTA for 112 and above frames. |
| High Starting and pullout torques. |
| Low Noise level with 85 dB [A] at 1 metre and conform to IS : 12065. |
| Low vibration levels conform to IS : 12075. |
| Foot / Flange [ Both B & C type] mounting with single / double shaft extension. |
| Suitable for flexible direct coupling or belt drives with Load GD2 equal to motor Gd2. |
| Diecast aluminium rotor is designed to withstand the severe forces encountered during starting. Special copper brazed rotors are proved for high speed applications. |
| Optimum fan design for better cooling and minimum energy consumption. |
| Rigidly sealed Terminal Box at RHS of the motor when viewed from Driving End [ other positions can be offered against specific request]. |
| Terminal boxes are larger in size with improved aesthetics, sufficient electrical clearances and are sealed against ingress of moisture and dust. Boxes for frames 250 and above are tested for through fault level of 43.7KA for 0.25 secs. Terminal Box can be rotatable 360 in step of 90. |
| Endshields on DE and NDE are identical and can be interchanged, if called for, minimizing the users inventory. |
New India offers Energy Efficient LV Aluminium & Cast Iron motor range with outputs from 0.18 kW to 375kW in frame sizes 63 to 355. Motors are suitable for a diverse range of applications from pumps, fans, conveyors, compressors, crushers, machine tools, material handling & crane, roller table drives etc. in various industries. Our motors have withstood many applications having adverse operating conditions including repeated starting, occasional overloading & other severe conditions & applications.
We follow the highest manufacturing processes & practices. Motors with IEC & NEMA standards are offered with efficiency class IE1, IE2, IE3.
| Inventor Duty. |
| IE2/IE3/EFF1/EFF2 Motors. |
| Energy Efficient and therefore are ideally suited for power intensive, process and other industries. |
| Class F insulation with class B temperature rise limit. |
| Suitable for DOL starting up to 100 frame and DOL / STAR-DELTA for 112 and above frames. |
| High Starting and pullout torques. |
| Low Noise level with 85 dB [A] at 1 metre and conform to IS : 12065. |
| Low vibration levels conform to IS : 12075. |
| Foot / Flange [ Both B & C type] mounting with single / double shaft extension. |
| Suitable for flexible direct coupling or belt drives with Load GD2 equal to motor Gd2. |
| Diecast aluminium rotor is designed to withstand the severe forces encountered during starting. Special copper brazed rotors are proved for high speed applications. |
| Optimum fan design for better cooling and minimum energy consumption. |
| Rigidly sealed Terminal Box at RHS of the motor when viewed from Driving End [ other positions can be offered against specific request]. |
| Terminal boxes are larger in size with improved aesthetics, sufficient electrical clearances and are sealed against ingress of moisture and dust. Boxes for frames 250 and above are tested for through fault level of 43.7KA for 0.25 secs. Terminal Box can be rotatable 360 in step of 90. |
| Endshields on DE and NDE are identical and can be interchanged, if called for, minimizing the users inventory. |
Nipul N. Desai (New India Electricals Limited)
Power House, #18, JC Road, Bangalore – 560002. INDIA, Chickpet, Karnataka
Share us via
