Post Buy Requirement
NA
Rajkot, Gujarat, India
Add Review

Automobile Garage Equipment

Wheel Aligner Mondello Model





































































Characteristics :
3D cameras alignmentBased on the car and not influenced by the platform
Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.
Target diskTarget disk has no electronic components, to replace the traditional electronic sensors and eliminate electrical mal-function
Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
Measurement progressno need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
Software systemEasy to operate, complete conventional basic parameters within two minutes , significantly faster than conventional aligners
Daily MaintenanceEasily maintenance , download and upgrade freely for the model data
Standard Configuration

Small compact cabinets, camera mounted, Lenovo or HP branded computers (Liquid Crystal Display) Canon Printers, target disk, Pylon, brake holder, steering wheel holder, wedge shaped pads



Software Features
Basic Functions: Parameters measurement such as Camber, Caster, Kingpin inclination, Toe-in & Toe-out, Set back, Thrust angle
Extension Functions: Axis off-set distance measurement, wheel off-set distance measurement, animation, single round measurement, the vehicle lift measurement function, steering wheel align function, positioning platform for testing, the level of degree, the amount of features, voice prompts, engine bracket adjustment before the beam lock measurement functions, the former beam curvature measurement, body height measurement functions, air suspension, vehicle positioning, software (proprietary software), tire demolished before the beam tilt backward dynamic adjustment of measurement functions, offset distance (grinding tire radium).
View Complete Details

Wheel Balancer

  • Power Supply 380V/60 Hz/3 Ph
  • Power 0.75Kw
  • Working Air Pressure 0.3 – 0.6 MPa
  • Rim Width 3/20”
  • Rim diameter 12/24”
  • Max wheel diameter 40 – 150mm
  • Max wheel diameters 1200mm
  • Balancing time Small Vehicle 7 Second & Larger Vehicle 10 
  • Balancing Speed 210 rpm
  • Balancing precision Small Vehicle ± 1 gm and Larger Vehicle ± 25 gm
  • Net/Gross Weight : 300/370 Kg. 300/370 Kg
  • Packing dimension 1700 x 880 x 1250




































Features
It can use for heavy duty tyres i.e. Mini Bus & Trucks
It can balance different size of wheels through pressing button MODE to Select
Pneumatic lift makes the truck wheel balancing easily
Automatic pneumatic brake, less noise
The reinforced shaft structure ensures the stable measurement.
Different wheels, different residual error, and automatically set up
View Complete Details

Computerised Wheel Balancer CB 986

we are offering computerised wheel balancer cb 986.
technical data :
power supply 220v60 hz1ph
power 0.25kw
rim width 1.512"
rim diameter 1224"
max wheel diameter 800mm
balancing time 7 second
balancing speed 180 rpm
balancing precision 1 gm
netgr.weight 120150 kg
dimension 820 x 820 x 1100mm
View Complete Details

HCV Wheel Aligner




































































Features :


Computerized Wheel Aligner, Bluetooth, RF, Positioning Sensing Device with all accessories designed for Bus, Truck and other special vehicles from YECEN-HUNTER.
Applicable to the repair work for truck, buses, and other commercial vehicles The data base covers more than 8000 large vehicles models around the world
It adopts optical graphical sensing and Bluetooth communication
It is capable of measuring with vehicle models with long wheel base of 15 meters at most.
It uses 4/8 pieces of sensors, achieving a fully realized four wheel alignment system mode with 32 beam optical measurement
It has functions for customer management and data printing
Thrust angle can be accurately adjusted by its accurate calculation on the axle adjustment measurement
Window XP operating system
Electronic clinometer offered can be used to check the leveleness of the vehicle frame, lift and the operating site (the function for deviation compensation of the operating platform is optional)
Many frequency channels are set in the software so as to avoid the interferences when many alignment machines working together
It adopts 2.4G frequency wireless communication, which has strong force of penetration even blocked
The main board of the sensors adopts transducers imported from USA ensures long life time and high accuracy Main board of the sensors adopts surface mounted techniques and CPU American microchip double core technology and such low power consumption makes the fault rate approaching zero.

Item Measurement Accuracy Measurement range Total Measurement Range
Camber ± 0.02° ± 8° ±8°
Caster ± 0.05° ± 19° ±19°
Front Wheel KP1 ± 0.02° ± 19°  ±19°
Total Toe ± 0.02° ± 26°  ±52°
Rear Wheel Thrust Angle ± 0.02° ± 4° ±8°
Toe out on turn ± 0.08° ± 5°   ±10°
Axle off set of Rear Wheel ± 0.02° ± 2° ±4°
Wheel Thread difference ± 0.03° ± 2° ±8°
Front Set back ± 0.02° ± 2° ±4°
Rear Set Back ± 0.02° ± 2°  ±4°
Wheel Thread ± 0.64cm (±0.25cm) < 265cm (< 105in) <265cm (< 105 in)
Wheel Base ± 0.64cm (±0.25cm) < 533cm (< 210in) <533cm (< 210 in)
View Complete Details

Computerised Wheel Balancer CB 702

We are offering computerised wheel balancer cb 702.
Technical data:
power & supply 220v60hz1 phase
power 0.25kw
rim width 1.512
rimdiameter 1224"
max wheel diameter 650mm
balancing time 7 second
balancingspeed 180 rpm
balancing precision 1 gm
View Complete Details

Computerised Wheel Balancer

  • Power 0.25Kw
  • Power & supply 220V/60Hz/1 Phase
  • Rim Width 1.5/12”
  • Rimdiameter 12/24"
  • Max wheel diameter 650mm
  • Balancing time 7 Second
  • BalancingSpeed 180 rpm
  • Balancing precision ± 1 gm
  • Net/Gross Weight 118/146 Kg.
  • Packing  dimension 850 x 700 x 1160 mm































Features
High accuracy main shaft ensure a High precision balancing
It is suitable for various kinds of wheel structure
Three location modes for choice
With malfunction diagnosis and self calibration function
Ounce/Gram, Millimeter/Inch selectable for easy conversion.
View Complete Details

Wheel Aligner

We deals in supplying of wide range of wheel aligner.
View Complete Details

3D Professional Wheel Balancer CB-966

We are offering 3d professional wheel balancer cb-966.
Technical parameter :
power supply 220v50hz 1ph0.25 kw
rim diameter 1024
max wheel diameter 960mm
wheel width 3 12
balancing precision 1g
centering wheel diameter hole 40 150mm
max wheel weight 65 kg
speed rotation -180 rpm
net weight 160 kg
View Complete Details

KT 06 Wheel Aligner

We are offering kt 06 wheel aligner.
Features
* latest psd sensor technology with blue tooth communication
* colour monitor
* cordless communication, many worktables operation with one machine.
* adopts geometric center line and thrust line principle to implement wheels alignment.
* simple procedure of operation
* more than 10000 types car model data in the memory
* data entry by the user themselves for additional vehicle models.
* possess client management function and print function.
View Complete Details

KT 08 Wheel Aligner

Features
* latest psd sensor technology with blue tooth communication
* colour monitor
* cordless communication, many worktables operation with one machine.
* adopts geometric center line and thrust line principle to implement wheels alignment.
* simple procedure of operation
* more than 10000 types car model data in the memory
* data entry by the user themselves for additional vehicle models.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Surendran (Newturn Autotech P. Ltd.)
  • 103,Sears Tower,11,Patel Society,Gulbai Tekra,Panchvati., Kotecha Nagar, Rajkot, Gujarat - 380006, India
  • Share us via
Retailer of Automobile Garage Equipment from Rajkot, Gujarat by Newturn Autotech P. Ltd.
Post Buy Requirement
NA
Rajkot, Gujarat, India
Add Review

Automobile Garage Equipment

Wheel Aligner Mondello Model





































































Characteristics :
3D cameras alignmentBased on the car and not influenced by the platform
Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.
Target diskTarget disk has no electronic components, to replace the traditional electronic sensors and eliminate electrical mal-function
Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
Measurement progressno need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
Software systemEasy to operate, complete conventional basic parameters within two minutes , significantly faster than conventional aligners
Daily MaintenanceEasily maintenance , download and upgrade freely for the model data
Standard Configuration

Small compact cabinets, camera mounted, Lenovo or HP branded computers (Liquid Crystal Display) Canon Printers, target disk, Pylon, brake holder, steering wheel holder, wedge shaped pads



Software Features
Basic Functions: Parameters measurement such as Camber, Caster, Kingpin inclination, Toe-in & Toe-out, Set back, Thrust angle
Extension Functions: Axis off-set distance measurement, wheel off-set distance measurement, animation, single round measurement, the vehicle lift measurement function, steering wheel align function, positioning platform for testing, the level of degree, the amount of features, voice prompts, engine bracket adjustment before the beam lock measurement functions, the former beam curvature measurement, body height measurement functions, air suspension, vehicle positioning, software (proprietary software), tire demolished before the beam tilt backward dynamic adjustment of measurement functions, offset distance (grinding tire radium).
View Complete Details

Wheel Balancer

  • Power Supply 380V/60 Hz/3 Ph
  • Power 0.75Kw
  • Working Air Pressure 0.3 – 0.6 MPa
  • Rim Width 3/20”
  • Rim diameter 12/24”
  • Max wheel diameter 40 – 150mm
  • Max wheel diameters 1200mm
  • Balancing time Small Vehicle 7 Second & Larger Vehicle 10 
  • Balancing Speed 210 rpm
  • Balancing precision Small Vehicle ± 1 gm and Larger Vehicle ± 25 gm
  • Net/Gross Weight : 300/370 Kg. 300/370 Kg
  • Packing dimension 1700 x 880 x 1250




































Features
It can use for heavy duty tyres i.e. Mini Bus & Trucks
It can balance different size of wheels through pressing button MODE to Select
Pneumatic lift makes the truck wheel balancing easily
Automatic pneumatic brake, less noise
The reinforced shaft structure ensures the stable measurement.
Different wheels, different residual error, and automatically set up
View Complete Details

Computerised Wheel Balancer CB 986

we are offering computerised wheel balancer cb 986.
technical data :
power supply 220v60 hz1ph
power 0.25kw
rim width 1.512"
rim diameter 1224"
max wheel diameter 800mm
balancing time 7 second
balancing speed 180 rpm
balancing precision 1 gm
netgr.weight 120150 kg
dimension 820 x 820 x 1100mm
View Complete Details

HCV Wheel Aligner




































































Features :


Computerized Wheel Aligner, Bluetooth, RF, Positioning Sensing Device with all accessories designed for Bus, Truck and other special vehicles from YECEN-HUNTER.
Applicable to the repair work for truck, buses, and other commercial vehicles The data base covers more than 8000 large vehicles models around the world
It adopts optical graphical sensing and Bluetooth communication
It is capable of measuring with vehicle models with long wheel base of 15 meters at most.
It uses 4/8 pieces of sensors, achieving a fully realized four wheel alignment system mode with 32 beam optical measurement
It has functions for customer management and data printing
Thrust angle can be accurately adjusted by its accurate calculation on the axle adjustment measurement
Window XP operating system
Electronic clinometer offered can be used to check the leveleness of the vehicle frame, lift and the operating site (the function for deviation compensation of the operating platform is optional)
Many frequency channels are set in the software so as to avoid the interferences when many alignment machines working together
It adopts 2.4G frequency wireless communication, which has strong force of penetration even blocked
The main board of the sensors adopts transducers imported from USA ensures long life time and high accuracy Main board of the sensors adopts surface mounted techniques and CPU American microchip double core technology and such low power consumption makes the fault rate approaching zero.

Item Measurement Accuracy Measurement range Total Measurement Range
Camber ± 0.02° ± 8° ±8°
Caster ± 0.05° ± 19° ±19°
Front Wheel KP1 ± 0.02° ± 19°  ±19°
Total Toe ± 0.02° ± 26°  ±52°
Rear Wheel Thrust Angle ± 0.02° ± 4° ±8°
Toe out on turn ± 0.08° ± 5°   ±10°
Axle off set of Rear Wheel ± 0.02° ± 2° ±4°
Wheel Thread difference ± 0.03° ± 2° ±8°
Front Set back ± 0.02° ± 2° ±4°
Rear Set Back ± 0.02° ± 2°  ±4°
Wheel Thread ± 0.64cm (±0.25cm) < 265cm (< 105in) <265cm (< 105 in)
Wheel Base ± 0.64cm (±0.25cm) < 533cm (< 210in) <533cm (< 210 in)
View Complete Details

Computerised Wheel Balancer CB 702

We are offering computerised wheel balancer cb 702.
Technical data:
power & supply 220v60hz1 phase
power 0.25kw
rim width 1.512
rimdiameter 1224"
max wheel diameter 650mm
balancing time 7 second
balancingspeed 180 rpm
balancing precision 1 gm
View Complete Details

Computerised Wheel Balancer

  • Power 0.25Kw
  • Power & supply 220V/60Hz/1 Phase
  • Rim Width 1.5/12”
  • Rimdiameter 12/24"
  • Max wheel diameter 650mm
  • Balancing time 7 Second
  • BalancingSpeed 180 rpm
  • Balancing precision ± 1 gm
  • Net/Gross Weight 118/146 Kg.
  • Packing  dimension 850 x 700 x 1160 mm































Features
High accuracy main shaft ensure a High precision balancing
It is suitable for various kinds of wheel structure
Three location modes for choice
With malfunction diagnosis and self calibration function
Ounce/Gram, Millimeter/Inch selectable for easy conversion.
View Complete Details

Wheel Aligner

We deals in supplying of wide range of wheel aligner.
View Complete Details

3D Professional Wheel Balancer CB-966

We are offering 3d professional wheel balancer cb-966.
Technical parameter :
power supply 220v50hz 1ph0.25 kw
rim diameter 1024
max wheel diameter 960mm
wheel width 3 12
balancing precision 1g
centering wheel diameter hole 40 150mm
max wheel weight 65 kg
speed rotation -180 rpm
net weight 160 kg
View Complete Details

KT 06 Wheel Aligner

We are offering kt 06 wheel aligner.
Features
* latest psd sensor technology with blue tooth communication
* colour monitor
* cordless communication, many worktables operation with one machine.
* adopts geometric center line and thrust line principle to implement wheels alignment.
* simple procedure of operation
* more than 10000 types car model data in the memory
* data entry by the user themselves for additional vehicle models.
* possess client management function and print function.
View Complete Details

KT 08 Wheel Aligner

Features
* latest psd sensor technology with blue tooth communication
* colour monitor
* cordless communication, many worktables operation with one machine.
* adopts geometric center line and thrust line principle to implement wheels alignment.
* simple procedure of operation
* more than 10000 types car model data in the memory
* data entry by the user themselves for additional vehicle models.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Surendran (Newturn Autotech P. Ltd.)
  • 103,Sears Tower,11,Patel Society,Gulbai Tekra,Panchvati., Kotecha Nagar, Rajkot, Gujarat - 380006, India
  • Share us via