Our Products
Suspension type Magnets are useful for products carried by the Conveyor belt.Suspension Type Magnets use is recommended for low contamination products. If the frequency of the impurities is very much, it will make a layer shunting magnetic field. Hence, the equipment required frequent cleaning. Over band type Magnetic Separator is recommended for this type of application.The principal applications are for processing of bulk products such as Culets, Glass, Co fee, Cereals, Minerals, Coal and Sugar etc.
InstallationNirmal Magnets can be installed at the end of belt above the head drum (Image-1) or across the Conveyor belt (Image-2).To avoid disturbances to the magnetic field, in both cases, the magnetic parts must be placed below the surface of the magnet.The installation shown in Image-1 is recommended for high speeds. Due to trajectory of the products and the fact that it is then fluidizes, separation is more efficient.
Rings, Rectangulars, Square, Segments, Discs, Cylindricals, Plasto-ferrite / Rubber Sheet / Strips, etc.
Any other shapes and sizes, not available in the country at present, could be supplied in accordance with the client’s requirement.
Our factory is well equipped with latest sophisticated machinery catering to the need for
Our Products were lunched in the market only 4 year back and have earned a high reputation in terms of quality and timely supply. Our magnets are fully guaranteed for its best performance. However, minor defects like hair line cracks, chipped edge or corner which are unavoidable due to nature of material. These defects are acceptable only, if they do not change the magnetic performance of the piece. Kumar magnets has carved out an unique place for itself at the forefront of magnet technology – with a reputation for the highest quality standards reliability and dependability of timely supplies-and the creditability that goes with it. the confidence that has been generated, thus, will be our springboard into the future – into more challenging vistas calling for the highest technical ingenuity and the most prudent resource management. Partners in each others growth through a commonality of interests. DISC MAGNETS are also available in isotropic material which do not have any specific directions, they can be magnetized by any one of the 3 axes. Isotropic Disc Magnets are available from 4.00 mm to 50.00 mm diameter and their varying heights.
Specification
Type | Length | Width |
KI711-PM | 60 | 98 |
KI712-PM | 130 | 98 |
KI713-PM | 170 | 98 |
KI714 - PM | 55 | 50 |
Cartridge-Style Liquid TrapsFor non fibrous fluids cartridge-style liquid traps are ideal. These types of separators are utilized where the size of the contaminants is few diameters and pose no risk of clogging. When the liquid is forced towards the tightly spaced grid, the contaminants come in the effect of magnetic field, which is extracted from the liquid flow by powerful Rare Earth Magnets The contaminants are held on the cartridge surfaces, which is later removed.
Magnetic Liquid Traps- Single PlateSingle plate magnet style liquid traps are effective and efficient in removing ferrous particles from viscous and fibrous liquids and liquids containing large suspended solids. The contaminants are thrusted to the magnetic plates where they are held. The magnetic field is strong enough to trap and protect the tramp materials from the wiping action of the liquid flow. The cleaning is done by removing the plate magnets from the housing and wiping the ferrous tramp to the edge of the plate, where it can easily be brushed away.
Magnetic Liquid Traps- Dual PlateDual plate magnet has diverter that creates a smooth flow pattern that protects fragile products from damage. The diverter also divides the product flow over two plate magnets. Thus even the flow rate is higher the dual plate traps can effectively handle it easily. The flow rate can be slowed thereby giving more magnetic protection. Also more contaminants are exposed to the magnetic field in the dual plate magnetic liquid traps.
Specifications
Applications
Heavy DutyHeavy duty drawer are useful for optimum magnetic separation in tough processing conditions like ambient temperature and humidity, bridging, abrasion, corrosion or galling. There are special coating on the drawer’s tubes that prevents sticking problems associated with certain products and processing conditions. Due to this the cleaning operations becomes even easier. The cleaning can be accomplished both manually and automatically.
Large TubeIn larger drawer magnets Rare Earth Magnetic tubes are incorporated for optimum ferrous metal separation on difficult flowing products such as flour, powdered sugar and other products with a tendency to bridge. The placement of larger tubes below steep angled diverters that prevent product from bridging or building up on the tubes. Since the spacing between the tubes are larger it allows the product to flow freely through the housing.
Manual CleanFor low levels of tramp metal contamination, manual clean drawer magnets are ideal. The Magnetic tubes are located on the alternating centers of the tubes. The trapped materials can be removed with the help of shop rag or gloved hand.
Self-CleaningIn difficult locations Self-cleaning Magnetic Drawer is considered as suitable. Through the toggle switch the operator can easily clean the assembly from a remote location.
Features
Applications
The drawer magnets can be applied in following areas:
Graph Image
Specification
Catalogue No. | Shape | Size in M. M. | Diameter No. of Magnetic Rods |
KI741 | Square | 150 x 150 | 2x38 m.m. |
KI742 | Square | 200 x 200 | 2x38 m.m |
KI743 | Square | 250 x 250 | 3x38 m.m. |
KI744 | Square | 300 x 300 | 4x38 m.m. |
KI745 | Round | Dia 150 | 2x38 m.m. |
KI746 | Round | Dia 200 | 2x38 m.m. |
KI747 | Round | Dia 250 | 3x38 m.m. |
KI748 | Round | Dia 300 | 4x38 m.m. |
Specification
Type | Lenght | Dia |
KI731- FM | 160 | 55 |
KI732- FM | 200 | 75 |
KI733- FM | 200 | 100 |
KI734- FM | 200 | 150 |