Nirmal offer the proposed Slitting Machine or Slitting Line HRICRISS on High Speed & Medium Speed as per customer requirment. Allthe Electronics controls are operted by PLC System Highly Automated is Providesd. The proposed Slitting Machine will function as a constant speed type. In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car trolley through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.

Nirmal offering High Speed tube mill for making ERWIAPUBSIIS and related applications rating maximum up to 12Omi‘min which are based on German and Taiwan Design and technology. Tube mill includes Fully mechanized system with Automatic feeding spiral system with NC cold saw cut of unit and High frequency solid state power saving Welders Tube mill mainly consists of strip preparation, pipe forming, welding, cooling, sizing straightening‘ pipe cut-off unit and pipe take off unit. A forming motor of and a sizing motor and power transmission is done by worm gear boxes drives the whole machine.
The strip first requires leveling and straightening which is done by passing the strip through strip leveler, pinch rolls and guide rolls. After this‘ the strip is passed through various forming rolls where the strips are converted into open seam pipe. Then it reaches the welding unit where the edges of the open seam tube is heated by hf induction generator [or any other welding equipment). Immediately after heating, the edges of the pipe are forged fused in the squeezing unit and it takes the shape of complete pipe. After welding, the welding portion is scrapped by bead scrapping unit then the tube is cooled in coolingjacket. For making it exact round the pipe is passed through sizing unit and then through turks head for straightening. After this the tube is cut into required length by a moving cutting machine and pushed to take off table.

Title: Receive High-End Slitting Job Work With Nirmal Texim Pvt Ltd

Are you searching for class-leading slitting job works in Alwar, Rajasthan? If yes then Nirmal Texim Pvt Ltd could be the ideal solution. Being one of the famous industrial equipment manufacturing groups, we also deliver extraordinary slitting job work services. We deliver our slitting job work with a team of highly trained staff. They can understand your needs well and slit any metal parts as per the desired length and width.

Being a well-known company, we at Nirmal Texim Pvt Ltd always try to deliver service as per the suitability and demands of our clients. The service we deliver is extremely significant in industries like automobiles, electronics, medical equipment, sporting goods and many more.

All our slitting job works are performed under professional management as per industry norms. Hence contact us to get the best slitting job work with the best offers.

Nirmal offer the proposed Cut To Length Machine or Cut To Length Line HRICRISS on High Speed & Medium Speed as per customer requirement. All the Electronics controls are operated by PLC System Highly Automated is Provides. The proposed Cut to Length Line will function as a constant speed type. In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end up to Pinch roll. The Pinch roll drives the coil end up to the cutter.

Nirmal offer the proposed Slitting Machine or Slitting Line HRICRISS on High Speed & Medium Speed as per customer requirment. Allthe Electronics controls are operted by PLC System Highly Automated is Providesd. The proposed Slitting Machine will function as a constant speed type. In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car trolley through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.

Nirmal offering High Speed tube mill for making ERWIAPUBSIIS and related applications rating maximum up to 12Omi‘min which are based on German and Taiwan Design and technology. Tube mill includes Fully mechanized system with Automatic feeding spiral system with NC cold saw cut of unit and High frequency solid state power saving Welders Tube mill mainly consists of strip preparation, pipe forming, welding, cooling, sizing straightening‘ pipe cut-off unit and pipe take off unit. A forming motor of and a sizing motor and power transmission is done by worm gear boxes drives the whole machine.
The strip first requires leveling and straightening which is done by passing the strip through strip leveler, pinch rolls and guide rolls. After this‘ the strip is passed through various forming rolls where the strips are converted into open seam pipe. Then it reaches the welding unit where the edges of the open seam tube is heated by hf induction generator [or any other welding equipment). Immediately after heating, the edges of the pipe are forged fused in the squeezing unit and it takes the shape of complete pipe. After welding, the welding portion is scrapped by bead scrapping unit then the tube is cooled in coolingjacket. For making it exact round the pipe is passed through sizing unit and then through turks head for straightening. After this the tube is cut into required length by a moving cutting machine and pushed to take off table.

Title: Receive High-End Slitting Job Work With Nirmal Texim Pvt Ltd

Are you searching for class-leading slitting job works in Alwar, Rajasthan? If yes then Nirmal Texim Pvt Ltd could be the ideal solution. Being one of the famous industrial equipment manufacturing groups, we also deliver extraordinary slitting job work services. We deliver our slitting job work with a team of highly trained staff. They can understand your needs well and slit any metal parts as per the desired length and width.

Being a well-known company, we at Nirmal Texim Pvt Ltd always try to deliver service as per the suitability and demands of our clients. The service we deliver is extremely significant in industries like automobiles, electronics, medical equipment, sporting goods and many more.

All our slitting job works are performed under professional management as per industry norms. Hence contact us to get the best slitting job work with the best offers.

Nirmal offer the proposed Cut To Length Machine or Cut To Length Line HRICRISS on High Speed & Medium Speed as per customer requirement. All the Electronics controls are operated by PLC System Highly Automated is Provides. The proposed Cut to Length Line will function as a constant speed type. In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end up to Pinch roll. The Pinch roll drives the coil end up to the cutter.