Fasteners, including bolts, nuts and rivets, are mechanical components used to fasten one object to another.

Magnetic clutches use electric magnets produced to lock or unlock the engine and the transmission input shaft, facilitating or terminating the flow of power. Magnetic brakes use electric magnets to accelerate, decelerate or stop rotation.

Minebea's lighting devices for fine color liquid-crystal displays (LCDs) for cellular telephones and personal digital assistants (PDAs) can be classified into front light and back light types, according to types of LCDs.Both types of products comprise white light-emitting diode (LED) chips and transparent plastic panel made from micron-order prisms, boasting outstanding brightness and performance.

LED driver converts alternating current (AC) to direct current (DC) between an AC source and LED array. LED drivers can also control the LED lighting intensity (dimming function).

These motors rotate at fixed angles by digitally controlled electronic pulses and are used in the paper-feeding devices of printers, copy machines, facsimiles and similar equipment. PM stepping motor uses a permanent magnet (PM) as a rotor.

These motors rotate at fixed angles by digitally controlled electronic pulses and are used in the paper-feeding devices of printers, copy machines, facsimiles and similar equipment. Hybrid-type stepping motor combine a rotor with a permanent magnet and a magnetic body using ball bearings.

Blowers rotate fans to cool the inside of office automation equipment by directing heat outside. These motors have more high power to cool than normal type of fan motor.

Strain gages consist of a very fine and thin metallic foil etched in a grid pattern, which is bonded to a device and used to measure the strain, or amount of deformation of the device when load or pressure is applied. The resulting electrical output is proportional to the strain.Because these strain gages are so small that they are negligible in mass, they excel in sensitivity, stability and fatigue with no inertial effect. They are also an easy-to-handle device, whose operating temperature range is wide. The strain gages can be used to measure the strain of all kinds of materials, regardless of metal or plastic.

Minebea manufactures load cells that use strain gage to convert tension, compression or mass into electric signals. Load cells, connected to various measuring devices for measuring purposes, display, record, control and keep track of the loads. Applications are diverse varying from small sensors for use in electronic scales, bath scales, game consoles and home electronics to those for general industrial uses, such as truck scales, measuring systems in production lines and tank scales.

The sensors for torque measurement in various driving parts like the engine and the transmission, etc. This sensor measures the twist with a strain gage, and transmits the output signal by using a transformer, or by using an optical sensor.

These devices, connected to various sensors and transducers, display measured values digitally and output signals, used for control and monitoring of the weighing systems.

Used to analyze the elastic rate, bearing rate and strength of the material and the products. Also Used to evaluate the product break-down test and the quality of the assembly on the process.

We have stepping motors which are very small in diameter, used in lens barrels of digital cameras and optical aberration of Blu-ray disc drives. We also line up high speed motors which use silicon steel metal. These are used in paper-feeding devices of printers, copy machines and other office automation equipments.

These motors are used in laser writing in digital copiers and other such devices.Polygon mirror rotated at high speed to scan laser beam radiated from LD (laser diode) into photoreceptor.High-precision fluid bearing technology helps make equipments quieter and save both space and energy.

High-pressure Blower developed for industrial machines such as printing machines, to blow and or inhale printing papers by highly efficient airflow.

Hard Disk Drive (HDD) spindle motors are what cause the disks in HDDs to rotate. The precision of these motors determine the capacity and speed of HDDs, making these components critical to HDD performance. Accordingly, these motors must offer superior performance in terms of rotational speed and low Non-Repeatable Run Out (NRRO).

Minebea integrates all aspects of thermal management expertise with capabilities in fan motor, power management and controller design. Minebea offers this technology as "Heat Management System Module ( HMSM )" to the global market.

Bushings are used in a variety of mechanical moving parts on both rotary and fixed wing aircraft. They are used in helicopters, primarily in the main rotor axes, and in landing gear for fixed wing aircraft. Bushings apply originally-developed Teflon liner to the inside of the bore and edge faces to allow for rotation without the need for lubricating agents.

Built up from self-manufactured bearings and machined parts, and used in many areas of aircraft assembly joints, these parts allow for significant savings in assembly time and cost for our customers.

Pivot assemblies are fitted into the base of actuators to position HDD magnetic heads. This product combine ball bearings between shaft and sleeve.

Various composite assemblies using Minebea's precision bearings.

Fasteners, including bolts, nuts and rivets, are mechanical components used to fasten one object to another.

Magnetic clutches use electric magnets produced to lock or unlock the engine and the transmission input shaft, facilitating or terminating the flow of power. Magnetic brakes use electric magnets to accelerate, decelerate or stop rotation.

Minebea's lighting devices for fine color liquid-crystal displays (LCDs) for cellular telephones and personal digital assistants (PDAs) can be classified into front light and back light types, according to types of LCDs.Both types of products comprise white light-emitting diode (LED) chips and transparent plastic panel made from micron-order prisms, boasting outstanding brightness and performance.

LED driver converts alternating current (AC) to direct current (DC) between an AC source and LED array. LED drivers can also control the LED lighting intensity (dimming function).

These motors rotate at fixed angles by digitally controlled electronic pulses and are used in the paper-feeding devices of printers, copy machines, facsimiles and similar equipment. PM stepping motor uses a permanent magnet (PM) as a rotor.

These motors rotate at fixed angles by digitally controlled electronic pulses and are used in the paper-feeding devices of printers, copy machines, facsimiles and similar equipment. Hybrid-type stepping motor combine a rotor with a permanent magnet and a magnetic body using ball bearings.

Blowers rotate fans to cool the inside of office automation equipment by directing heat outside. These motors have more high power to cool than normal type of fan motor.

Strain gages consist of a very fine and thin metallic foil etched in a grid pattern, which is bonded to a device and used to measure the strain, or amount of deformation of the device when load or pressure is applied. The resulting electrical output is proportional to the strain.Because these strain gages are so small that they are negligible in mass, they excel in sensitivity, stability and fatigue with no inertial effect. They are also an easy-to-handle device, whose operating temperature range is wide. The strain gages can be used to measure the strain of all kinds of materials, regardless of metal or plastic.

Minebea manufactures load cells that use strain gage to convert tension, compression or mass into electric signals. Load cells, connected to various measuring devices for measuring purposes, display, record, control and keep track of the loads. Applications are diverse varying from small sensors for use in electronic scales, bath scales, game consoles and home electronics to those for general industrial uses, such as truck scales, measuring systems in production lines and tank scales.

The sensors for torque measurement in various driving parts like the engine and the transmission, etc. This sensor measures the twist with a strain gage, and transmits the output signal by using a transformer, or by using an optical sensor.

These devices, connected to various sensors and transducers, display measured values digitally and output signals, used for control and monitoring of the weighing systems.

Used to analyze the elastic rate, bearing rate and strength of the material and the products. Also Used to evaluate the product break-down test and the quality of the assembly on the process.

We have stepping motors which are very small in diameter, used in lens barrels of digital cameras and optical aberration of Blu-ray disc drives. We also line up high speed motors which use silicon steel metal. These are used in paper-feeding devices of printers, copy machines and other office automation equipments.

These motors are used in laser writing in digital copiers and other such devices.Polygon mirror rotated at high speed to scan laser beam radiated from LD (laser diode) into photoreceptor.High-precision fluid bearing technology helps make equipments quieter and save both space and energy.

High-pressure Blower developed for industrial machines such as printing machines, to blow and or inhale printing papers by highly efficient airflow.

Hard Disk Drive (HDD) spindle motors are what cause the disks in HDDs to rotate. The precision of these motors determine the capacity and speed of HDDs, making these components critical to HDD performance. Accordingly, these motors must offer superior performance in terms of rotational speed and low Non-Repeatable Run Out (NRRO).

Minebea integrates all aspects of thermal management expertise with capabilities in fan motor, power management and controller design. Minebea offers this technology as "Heat Management System Module ( HMSM )" to the global market.

Bushings are used in a variety of mechanical moving parts on both rotary and fixed wing aircraft. They are used in helicopters, primarily in the main rotor axes, and in landing gear for fixed wing aircraft. Bushings apply originally-developed Teflon liner to the inside of the bore and edge faces to allow for rotation without the need for lubricating agents.

Built up from self-manufactured bearings and machined parts, and used in many areas of aircraft assembly joints, these parts allow for significant savings in assembly time and cost for our customers.

Pivot assemblies are fitted into the base of actuators to position HDD magnetic heads. This product combine ball bearings between shaft and sleeve.

Various composite assemblies using Minebea's precision bearings.