- MOQ 1 Piece(s)
- Pump, motor, valve, filteroriginal manufactired
axial piston variable displacement pump is of swashplate design and is designed for open circuit operation.continuous operating pressure of 5100 psi (350 bar). the pumps, motors or valves in the standard design, should be used with good quality, petroleum oil based, anti-wear hydraulic fluids. valves with steel manifold: manifolds are manufactered from high quality steel and are externally coated by zinc plating strengthened with yellow passivation. they are reccomended for heavy duty applications where the maximum rated pressure is frequently achieved. for product applications, carefull attention should be paid to the technical specifications supplied by manufacturer will not be responsible for demage to person or things caused by non standard use of its products. in case of doubts always contact the technical department and follow exactly the instructions contained in the technical manuals and in the paper which accompanies the product. the all the types of hydraulic pumps are self-priming pumps.their task is to produce a constant flow and at the same time pass on the required forces. they mainly consist of the housing, mounting flange, drive shaft, bearing blocks, bearing bush and discs for the hydrostatic gap compensation. the gear, vane or piston separating during the rotational movement releases the pressure chambers. the negative pressure resulting from this, as well as the atmospheric pressure acting on the pressure fluid level in the tank causes the pressure fluid to flow to the pump from the tank. this pressure fluid fills the gear, vane, piston chambers and is moved, in the direction from the suction to the pressure side. here the gears, vanes or piston mesh once more and push the pressure fluid out of the pressure chambers and prevent return flow to the suction chamber. in order to avoid hard and jolting running of the pump, small unloading grooves are cut into the sides of the bearing blocks.