• An oil cleaning device capable of removing solid, water, oxidised lighter weight molecules of oil, air & gaseous contaminants from any oil.
• Ensures high level protection from corrosion and rust for maximum gear & bearing life.
• Protection of dirt sensitive hydraulic components from the power train generated contaminants.
• Cleaning oil at regular intervals will ensure increase in oil drain interval. This would also help to conserve oil & bearing file.

• For lifting heavy vehicles such as lorries etc.
• This Industrial Air Jack has a Robust Steel Chassis, 'T' Bar Handle with integral air control valve and two extensions for increased lifting height.
• Capacity 20 / 40 Ton.

• Operated through hydraulic manual pump. option of Motorized Power Pack is also available in higher capacity .
• The hydraulic press is used for specific pressing jobs in workshop like bearing, bush fitting & extraction, straightening of bend rods etc.
• Fully adjustable work bed with height adjustment mechanism.
• Capacity : 15 to 25 Tons

• This Equipment is designed to hold the heavy engine during overhauling. It has mechanism of locking & rotating the engine as per requirement
• Capacity for engine up to 1.5 ton.
• 360 degree rotatable type with gear box.
• Suitable for all heavy Commercial vehicles engine.

• Hydraulically Operated Scissor Type Platform to support Tractors during testing at dynamometer. To maintain PTO Shaft in line with Mechanism.
• Size : 3045 X 1900 X 160 mm FO = 400 mm

• Unique design facilitates during overhauling and separating the tractor aggregates
• Option of adjustable top on mechanical jack is also available.

• A multi purpose washing equipment for heavy vehicle & tractor parts.
• Unique design for cleaning hub with In-built pump & cleaning fluid recycling system with oil filtration partition shelve.
• Heavy duty castor wheel for easy movement.aaaa

• Hydraulic operated thru manual pump.
• Provides facility in handling oil & diesel barrels in workshops.
• Heavy duty castor wheels for easy movement.

• Structure made of resin molded fiber canopy.
• SPC has been designed to cleaning of spark plug.
• Maximum pressure of 12kg/cm2.
• Minimum pressure of 7kg/cm2 which is essential for cleaning plug.
• Electronics Vibrator : 220V / 12V
• Input voltage : 220V, AC, 50 Hz
• Working Pressure : 5kgf/cm2-12kgf/cm2

• Oil dispenser is a unique machine for filling oil in gear box of two wheeler engine.
• It's a automatic machine.
• Easy to operate by electronic panel.
• Just set the quantity & press (F) to fill.
• It fill the exact quantity of oil.
• It can take about 50seconds to fill 1 to 3 Ltr .of oil
• Canopy made of M.S sheet.
• Microprocessor based fully controlled automatic machine.
• Paint / Powder coated .

• Oil dispenser is a unique machine for filling oil in gear box of two wheeler engine.
• It's a automatic machine.
• Easy to operate by electronic panel.
• Just set the quantity & press (F) to fill.
• It fill the exact quantity of oil.
• It can take about 50seconds to fill 1 to 3 Ltr .of oil
• Canopy made of M.S sheet.
• Microprocessor based fully controlled automatic machine.
• Paint / Powder coated .
  

• Space saving design for washing.
• Structure made of M.S.
• AC 220 V operated.
• Paint powder coated .

• Structure made of M.S sheet or M.S pipe.
• M.S top covered with light green rubber sheet.
• 2 Drawers for keeping tools.
• Bench vice at one corner or grinder at the other corner.
• Rack at the bottom for keeping dismantled items

Gives modernized looks with advance technology hassle free installation with
proper utilization of space, leak & moisture free system with sliding hose pipe for quick service at bays

• Structure made of M.S sheet or M.S pipe.
• M.S top covered with rubber sheet.
• 2 Full length racks keeping tools & dismantled parts.
• Rack at the bottom for placing big items.

• Electronic Pre - set mode facility with totalizer.
• Dispense up to 30 Ltrs. per minute Thru specially designed 50 Ltrs. 3 different oil tank mounted on trolley by pneumatic pressure.
• Auto shutoff function.
• Equipped with Non Dripping Gun.

Compact, light weight and portable quick battery charger, boost up & quick charge run-down battery as well as provide normal charging for 2 batteries. Specification :

• Electronic Pre - set mode facility with totalizer.
• Dispense up to 30 Ltrs. per minute thru 200 Ltrs. barrel.
• Auto shutoff function.
• Suitable for dispensing engine, gear, hydraulic oil, automatic transmission fluid & anti boil, up to maximum viscosity of SAE 140.
• Equipped with non dripping gun.
• 200 Ltrs. barrel is not part of this system.

• Gives modernized looks with advance technology & hassle free installation.
• Keeps workshop pollution / smoke free.
• Equipped with Heavy Duty Blower

• Structure made of M.S sheet or M.S pipe.
• M.S top covered with rubber sheet.
• This table used at the time of engine dismantling & assembling.

Made of M.S frame.
Inbuilt 2 nos. pneumatic hose reel for nut runner & air blow gun.
Inbuilt FRL for removing moisture & set the Air pressure.
Pneumatic operation area 5 to 10 meters as per requirements.

• Utilized for greasing different parts of the vehicle.
• Capacity 510 kg
• Foot operated with multi shoot in single operation.

• Portable washing pump.
• Easy to operate.
• It takes less time for better wash.
• Different nozzles for improve quality wash.
• Wheel for easy movement .

Reciprocating type vehicle washer with single plunger, 3 HP motor and wire braided hose.We offer a wide range of precision machined car washers that are used for vehicle washing pump for 2 wheeler, 3 wheeler, cars and commercial vehicles. These are available in Single Plunger and Triple Plunger.

• Two staged air cooled industrial air compressor to operate pneumatic tools, tyre inflation and compressed air cleaning purpose.
• The air compressor equipped with unique safety feature of auto-cut system which saves the power also, suction air filter, electric motor, safety valve, belt.
• Available in various size & capacity.

• Manual Oprated.
• Dial shown the reading during inflation.

• Power Voltage 220v/380v
• Working Air Pressure 0.8-1.0 Mpa
• Rate 1.1 to 0.75Kw
• Rim Diameter : Inner :12@22
• Rim Width Outer : 9@20
• Max Wheel Diameter 38
• Average Rotate Speed 6.8 rpm
• Shovel Force 2000 kg
• Net Weight Appex 185 kg
• Packing Dimension 980X880X960 mm

Steel Top Protected with high grade PVC sheet unbreakable Acrylic Polycarbonate trays for storage of parts. Castor wheels provided for easy movability.

It is integral structure designed for fulfills all the requirements of the technician at the time of servicing the vehicle. Enhanced safety due to proper positioning of the tools. Drawers are given for keeping the general tools. Inbuilt pneumatic systems for nut runner or air blow gun. Illuminated light, bin & notice board etc.

• Specially designed for wheel balancing for 2 wheeler.
• Manually operated.
• Structure made of M.S.
• Portable machine.

• For cleaning the dismantled parts before assembly thru. high pressure nozzles.
• Parts cleaned with kerosene / diesel.
• Multi jet system for spray & brush with built - in line for optimum cleaning.
• Oil is recycled through special filter.

• Structure made of M.S.
• 3 bowls inbuilt for cleaning the filter by kerosene & luberication.
• Light in weight.
• Bottom tray for keeping filter.
• Paint / Powder coated.

• Used for greasing different parts of the vehicle.
• Capacity 25 - 50 kg.
• Pneumatically operated.
• Pump dispenses grease at pressures upto 50 times the Air inlet pre

• Easy to read digital display.
• Long lasting LED light for night use.
• Powerful & Compact.
• Preset mode facility option available.

• Waste oil collection & transfer system with collecting can.
• Easy to dispose the waste oil.
• Capacity - 10 Ltrs.
• Easy to drain.

Electronically controlled digital infrared dryer for Quick drying of paint with proper finish .

• Made of M.S frame.
• Inbuilt 2 nos. pneumatic hose reel for nut runner & air blow gun.
• Inbuilt FRL for removing moisture & set the Air pressure.
• Pneumatic operation area 5 to 10 meters as per requirements.

• Quick accurate test result in seconds on digital display.
• Compact and handy instrument.
• Used in Automotive and Industrial batteries.
• User friendly operation.

• Utilized for greasing different parts of the vehicle.
• Capacity 500 grams.
• Hand operated.

• Automatic input for distance and diameter Suitable for car or motorcycle wheels.
• Automatic input of wheel diameter and distance.Measuring rod can align the precise sticker weight paste position.
• Automatic start by lowering wheel guard.
• Power supply : 220V, 50Hz, 1 hp.

• Easy to use poly-carbonate graduated beaker with fuel control knob & return Line for milage testing in field, placed in metal frame. Can be mounted on any tractor.
• Tank Capacity : 4 Ltrs.

• Structure made of M.S pipe / sheet.
• Heater for heating grease.
• Temprature control regulator.
• Hooks for hanging chains.
• Sliding tray for placing diesel tray

• An oil cleaning device capable of removing solid, water, oxidised lighter weight molecules of oil, air & gaseous contaminants from any oil.
• Ensures high level protection from corrosion and rust for maximum gear & bearing life.
• Protection of dirt sensitive hydraulic components from the power train generated contaminants.
• Cleaning oil at regular intervals will ensure increase in oil drain interval. This would also help to conserve oil & bearing file.

• For lifting heavy vehicles such as lorries etc.
• This Industrial Air Jack has a Robust Steel Chassis, 'T' Bar Handle with integral air control valve and two extensions for increased lifting height.
• Capacity 20 / 40 Ton.

• Operated through hydraulic manual pump. option of Motorized Power Pack is also available in higher capacity .
• The hydraulic press is used for specific pressing jobs in workshop like bearing, bush fitting & extraction, straightening of bend rods etc.
• Fully adjustable work bed with height adjustment mechanism.
• Capacity : 15 to 25 Tons

• This Equipment is designed to hold the heavy engine during overhauling. It has mechanism of locking & rotating the engine as per requirement
• Capacity for engine up to 1.5 ton.
• 360 degree rotatable type with gear box.
• Suitable for all heavy Commercial vehicles engine.

• Hydraulically Operated Scissor Type Platform to support Tractors during testing at dynamometer. To maintain PTO Shaft in line with Mechanism.
• Size : 3045 X 1900 X 160 mm FO = 400 mm

• Unique design facilitates during overhauling and separating the tractor aggregates
• Option of adjustable top on mechanical jack is also available.

• A multi purpose washing equipment for heavy vehicle & tractor parts.
• Unique design for cleaning hub with In-built pump & cleaning fluid recycling system with oil filtration partition shelve.
• Heavy duty castor wheel for easy movement.aaaa

• Hydraulic operated thru manual pump.
• Provides facility in handling oil & diesel barrels in workshops.
• Heavy duty castor wheels for easy movement.

• Structure made of resin molded fiber canopy.
• SPC has been designed to cleaning of spark plug.
• Maximum pressure of 12kg/cm2.
• Minimum pressure of 7kg/cm2 which is essential for cleaning plug.
• Electronics Vibrator : 220V / 12V
• Input voltage : 220V, AC, 50 Hz
• Working Pressure : 5kgf/cm2-12kgf/cm2

• Oil dispenser is a unique machine for filling oil in gear box of two wheeler engine.
• It's a automatic machine.
• Easy to operate by electronic panel.
• Just set the quantity & press (F) to fill.
• It fill the exact quantity of oil.
• It can take about 50seconds to fill 1 to 3 Ltr .of oil
• Canopy made of M.S sheet.
• Microprocessor based fully controlled automatic machine.
• Paint / Powder coated .

• Oil dispenser is a unique machine for filling oil in gear box of two wheeler engine.
• It's a automatic machine.
• Easy to operate by electronic panel.
• Just set the quantity & press (F) to fill.
• It fill the exact quantity of oil.
• It can take about 50seconds to fill 1 to 3 Ltr .of oil
• Canopy made of M.S sheet.
• Microprocessor based fully controlled automatic machine.
• Paint / Powder coated .
  

• Space saving design for washing.
• Structure made of M.S.
• AC 220 V operated.
• Paint powder coated .

• Structure made of M.S sheet or M.S pipe.
• M.S top covered with light green rubber sheet.
• 2 Drawers for keeping tools.
• Bench vice at one corner or grinder at the other corner.
• Rack at the bottom for keeping dismantled items

Gives modernized looks with advance technology hassle free installation with
proper utilization of space, leak & moisture free system with sliding hose pipe for quick service at bays

• Structure made of M.S sheet or M.S pipe.
• M.S top covered with rubber sheet.
• 2 Full length racks keeping tools & dismantled parts.
• Rack at the bottom for placing big items.

• Electronic Pre - set mode facility with totalizer.
• Dispense up to 30 Ltrs. per minute Thru specially designed 50 Ltrs. 3 different oil tank mounted on trolley by pneumatic pressure.
• Auto shutoff function.
• Equipped with Non Dripping Gun.

Compact, light weight and portable quick battery charger, boost up & quick charge run-down battery as well as provide normal charging for 2 batteries. Specification :

• Electronic Pre - set mode facility with totalizer.
• Dispense up to 30 Ltrs. per minute thru 200 Ltrs. barrel.
• Auto shutoff function.
• Suitable for dispensing engine, gear, hydraulic oil, automatic transmission fluid & anti boil, up to maximum viscosity of SAE 140.
• Equipped with non dripping gun.
• 200 Ltrs. barrel is not part of this system.

• Gives modernized looks with advance technology & hassle free installation.
• Keeps workshop pollution / smoke free.
• Equipped with Heavy Duty Blower

• Structure made of M.S sheet or M.S pipe.
• M.S top covered with rubber sheet.
• This table used at the time of engine dismantling & assembling.

Made of M.S frame.
Inbuilt 2 nos. pneumatic hose reel for nut runner & air blow gun.
Inbuilt FRL for removing moisture & set the Air pressure.
Pneumatic operation area 5 to 10 meters as per requirements.

• Utilized for greasing different parts of the vehicle.
• Capacity 510 kg
• Foot operated with multi shoot in single operation.

• Portable washing pump.
• Easy to operate.
• It takes less time for better wash.
• Different nozzles for improve quality wash.
• Wheel for easy movement .

Reciprocating type vehicle washer with single plunger, 3 HP motor and wire braided hose.We offer a wide range of precision machined car washers that are used for vehicle washing pump for 2 wheeler, 3 wheeler, cars and commercial vehicles. These are available in Single Plunger and Triple Plunger.

• Two staged air cooled industrial air compressor to operate pneumatic tools, tyre inflation and compressed air cleaning purpose.
• The air compressor equipped with unique safety feature of auto-cut system which saves the power also, suction air filter, electric motor, safety valve, belt.
• Available in various size & capacity.

• Manual Oprated.
• Dial shown the reading during inflation.

• Power Voltage 220v/380v
• Working Air Pressure 0.8-1.0 Mpa
• Rate 1.1 to 0.75Kw
• Rim Diameter : Inner :12@22
• Rim Width Outer : 9@20
• Max Wheel Diameter 38
• Average Rotate Speed 6.8 rpm
• Shovel Force 2000 kg
• Net Weight Appex 185 kg
• Packing Dimension 980X880X960 mm

Steel Top Protected with high grade PVC sheet unbreakable Acrylic Polycarbonate trays for storage of parts. Castor wheels provided for easy movability.

It is integral structure designed for fulfills all the requirements of the technician at the time of servicing the vehicle. Enhanced safety due to proper positioning of the tools. Drawers are given for keeping the general tools. Inbuilt pneumatic systems for nut runner or air blow gun. Illuminated light, bin & notice board etc.

• Specially designed for wheel balancing for 2 wheeler.
• Manually operated.
• Structure made of M.S.
• Portable machine.

• For cleaning the dismantled parts before assembly thru. high pressure nozzles.
• Parts cleaned with kerosene / diesel.
• Multi jet system for spray & brush with built - in line for optimum cleaning.
• Oil is recycled through special filter.

• Structure made of M.S.
• 3 bowls inbuilt for cleaning the filter by kerosene & luberication.
• Light in weight.
• Bottom tray for keeping filter.
• Paint / Powder coated.

• Used for greasing different parts of the vehicle.
• Capacity 25 - 50 kg.
• Pneumatically operated.
• Pump dispenses grease at pressures upto 50 times the Air inlet pre

• Easy to read digital display.
• Long lasting LED light for night use.
• Powerful & Compact.
• Preset mode facility option available.

• Waste oil collection & transfer system with collecting can.
• Easy to dispose the waste oil.
• Capacity - 10 Ltrs.
• Easy to drain.

Electronically controlled digital infrared dryer for Quick drying of paint with proper finish .

• Made of M.S frame.
• Inbuilt 2 nos. pneumatic hose reel for nut runner & air blow gun.
• Inbuilt FRL for removing moisture & set the Air pressure.
• Pneumatic operation area 5 to 10 meters as per requirements.

• Quick accurate test result in seconds on digital display.
• Compact and handy instrument.
• Used in Automotive and Industrial batteries.
• User friendly operation.

• Utilized for greasing different parts of the vehicle.
• Capacity 500 grams.
• Hand operated.

• Automatic input for distance and diameter Suitable for car or motorcycle wheels.
• Automatic input of wheel diameter and distance.Measuring rod can align the precise sticker weight paste position.
• Automatic start by lowering wheel guard.
• Power supply : 220V, 50Hz, 1 hp.

• Easy to use poly-carbonate graduated beaker with fuel control knob & return Line for milage testing in field, placed in metal frame. Can be mounted on any tractor.
• Tank Capacity : 4 Ltrs.

• Structure made of M.S pipe / sheet.
• Heater for heating grease.
• Temprature control regulator.
• Hooks for hanging chains.
• Sliding tray for placing diesel tray