Om Industries Bahadurgarh, Haryana

The stainless steel corrugated hoses are available in stainless steel grades (aisi) 321, 316, 316l, & 304 by forming consolution so that it may conveniently bend while remaining liquid and gas tight. The hoses of specific length as per requirement can be manufactured with the end fittings in flanged threaded types. The flexible hose are available in braidings of stainless steel wire to take care of external damage and to increase pressure ratings.

Interlocked metal hose is also referred to as strip wound hose and consists of successive turns of profiled strip, with the edges of adjacent turns interlocked. Interlock Hoses are made with a packing so that filament of cotton, asbestos, rubber or metals like copper can be fed into the interlock to make it pressure tight. It is mostly used as a protectiveconduit casing. It is also used as a liner inside the hose based on the profile formation.

This Fitting are easy to assemble Possesses Unique locking action by back Formula and Resistant to Vibration and Pressure Pulses, Silver Plated Nuts prevent sizing on Stainless Steel and no torque is transmitted to the tube. It is suitable for high vacuum and Pressure Upto 10, 000 Rs.2. They are made of Stainless Steel Tubes SS 316, 304, 3041, 306 and are Available in '116' OD To 2 OD. Carbon steel bite Fittings Comprises Of a Special Ferrule which Grip the Pipe in Position And Perceptibly bites into the Pipes surface to Provide Positive Seal. It is also bowed Slightly in the middle and acts as a Spring which Prevents Loosening of the Joint under Vibration And Strain.Brass Olive Tube Fittings are used In Low Pressure. Functions :- This Fitting are Available in Swage lock Type, Ermetto Type, Parker Type, Festo Type, Push in Type and Flare Type. Uses :- Pneumatic Or Hydraulic Installation Air Logic, Systems, Chemical Handling, Centralized Lubrication Systems, Low Pressure Hydraulics, Gas Water And Fluid Lines.

When the corrugated hose is subjected to pressure, it tends to open axially. The wire braid is provided to prevent elongation caused by the pressure on the hose. This results in manifold increase in the hose's pressure strength. The braid also provides physical protection against damage to the tube and also dampens secondary vibration movements. The braid is made of Stainless steel wire conforming to AISI 304316321. The angles of lay, wire thickness, number of strands are carefully selected to meet the various application requirements. The braid is woven in such a way that line pressure produces braid tension, and correspondingly provides radial and axial constraint prohibiting elongation of inner tubes. Multiple braided assemblies required to accommodate higher pressures, are also available. Loose braids are also manufactured to meet specific requirements for rubber hoses and other flexible hoses of varied materials. These are tailor-made to meet customer needs.

A hydraulic hose consists of an inner tube through which the fluid is conveyed and comes into direct contact with the hydraulic fluid. The rubber or other synthetic material used for this needs to be compatible and able to withstand the range of working temperature without losing its chemical and physical stability. The hydraulic hoses can be made using a variety of materials, depending on the factors of oil compatibility, abrasion resistance etc.

Pipe fitting is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and repair of leaks. Fittings are manufactured to DINISSAEBSANSI Standards and to customers requirements.