Mumbai, Maharashtra, India
Our Products
Omicron’s BTU meters, also referred to as energy meters, are ideal for all sub-metering and performance verification applications. Several different types and models are available to fit almost any application, including hydronic heating and/or cooling, solar thermal, geothermal, water-source heat pump and co-generation.
BTU Meters Product Range :
| ||||
These are designed to protect pressure Instruments from over pressure exceeding The specified pressure range by sudden& Excessive pressure fluctuation from surge Or spike. This device blocks the higher Pressure exceeding the allowed value, until It comes back to normal, when system Pressure becomes normal.Hence this device Safeguards the pressure instrument, gauges, Switches or transmitters by blocking extra High pressure.
Adoption of CPU makes the measurement more accurate,
temperature self-compensation . A big screen LCD with back lighting to ensure the reading is clear and free from parallax Special energy saving backlight control, date hold and can hold value.Low power symbol automatic indicating Grains that can be tested with the meter: wheat, paddy, rice and corn
| Moisture measurement range | 2%~30% |
| Resolution | 0.50% |
| Temperature measurement range |
-10~60°C(14~140°F) |
| Maximum error | ±2°C(±4°F) |
| Resolution | 1°C (2°F) |
| Ambient temperature | -10~40°C (14~104°F) |
| Ambient humidity | 0~70%Rh |
| Battery | 4x1.5V AA battery |
| Dimensions | 174L×73W×38Hmm (for main unit) |
Indoor & Outdoor Temperature Display, Indoor Humidity Display Temperature Unit C/ F Changeable Memory Of Max/Min Value Of Temperature & Humidity 2 Modes Of Time Display: 12h / 24h. Clock & Date Display Function, Automatic Exchanging In 5 Seconds Between Clcock & Date Pointing Function On Each Hour Everyday Alarm Function Calendar Display Function Week Display Function (Only For Typical Models) Clock, Date, Lunar Calendar, Gregorian Calendar Automatic Exchanging Function (Only For Typical Models) Install A Outdoor Temperature Sensor, Automatically Displays Indoor & Outdoor Temperature Alternately In 5 Seconds (Only For Typical Models)
| Indoor | 10°C ~ +50°C (+14°F ~ +122°F) |
| Outdoor | 50°C ~ +70°C (-58°F ~ +158°F) |
| Humidity Range | Indoor 20% ~ 99% RH When the humidity < 20%RH, display 10%RH directly. |
| Power-supply | 1.5V (AAA size) x1 |
PH meter, PH electrode, PH controller, PH monitor, TDS meter, EC meter, CF meter, condutometer, ORP controller, ORP meter
Features
| Measures electrical conductivity (EC) and temperature. | |
| Automatic Temperature Compensation (ATC) | |
| Water-resistant housing | |
| Measurement Range: 0-9999 @S | |
| Digital Calibration (push button) | |
| Auto-off function, data-hold function and low-battery indicator. | |
| Display: large and easy-to-read LCD screen includes simultaneous temperature reading. | |
| Factory Calibrated: The AquaPro is calibrated with a 700 @S solution. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver. | |
| Includes a cap and batteries | |
| Comes in a retail-oriented package |
Easy to change the electrode. Pen type ORP meter, all in one, ORP electrode is included, easy for general purpose application. Water proof and protection. Build in temperature sensor, ATC (auto temperature compensation). Auto calibration for 0 mV, 500mV Temperature measurement Available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions. LCD with two displays and low battery indicator. Data hold function for freezing the desired value. Auto power off without any operations after 20 mins. Microcomputer circuit, intelligent function, high accuracy. Compact size, light weight. Power supply by DC 1.5 V battery (LR44, BAT ) x 4 PCs
Total Dissolved Solids(TDS)are the total weight of all solids (minerals, salts, or metals) that are dissolved in a given volume liter(mg/L), or in parts per million(ppm).The lower TDS level in the water, the more efficiently your bodys cells actually get hydrated by the water you drink. The higher TDS level in the water, the grater the probability of harmful contaminants that can pose health risks of hinder the on the cellular level
The EPAS maximum contaminant levels of TDS in secondary drinking water is 500mg/L (500ppm).
| Hold function: Saves measurements for convenient reading and recording. | |
| Auto-off function: turn on meter after 8 minutes of non-use to conserve batteries, and will be locked automatically after 2 minutes. | |
| Dual range: measures from 0-999ppm, with a resolution is 10 ppm, indicated by drinking*10 image, factory calibrated. | |
| Range:0-9990ppm | |
| Accuracy:+/-2% | |
| Battery:2*1.5V(button cell) | |
| Size:154*26*19mm(6.06*1.02*0.75in) | |
| Weight: 65g(2.29 oz) |
A pH (potential of Hydrogen) measurement reveals if a solution is acidic or alkaline (also base or basic). If the solution has an equal amount of acidic and alkaline molecules, the pH is considered neutral. Very soft water is commonly acidic, while very hard water is commonly alkaline, though unusual circumstances can result in exceptions. The pH scale is logarithmic and runs from 0.0 to 14.0 with 7.0 being neutral. Readings less than 7.0 indicate acidic solutions, while higher readings indicate alkaline or base solutions. Some extreme substances can score lower than 0 or greater than 14, but most fall within the scale.
| Renewable Junction | |
| Easy 1 or 2 Points Manual Calibration | |
| 700 Hour Battery Life | |
| Simple to Use | |
| Economical | |
| Suitable for temperatures upto 50 deg C | |
| Size:175*41*23mm | |
| Weight: 95g(3.4 oz) |
Nuclear Radiation Detector, Personal Radiation Dosimeter, Personal Radiation Detetor, Personal Radiation Alarm Dosimeter
| High sensitivity, stable and reliable. | |
| Super LCD English display functions, state display at a glance. | |
| When measuring radiation dose rate, display dose rate, accumulated dose and storage accumulated dose, it has variety of selections on dose rate Alarm threshold. According to the high-low of dose rate and accuracy choice the measure time, general measure time is 02s. | |
| General cases, nature dose rate and cumulative dose do not display, don't participate in measurement, this improved equipment's reliability and precision. | |
| Specially designed the nature test function, it can testing equipment work normally or not, convenient to self-check and measuring department examination. | |
| With accumulated dose memory function, after power failure, data can be stored permanently, and don't lost. | |
| Simple operation and easy to use. |
The instrument can be used in non-destructive, fast and accurate area for coating thickness measurement. It is an ideal aided tool for the paint, corrosion, plating, automotive, ship transportation, aircraft manufacturing and other related industries. It can work stably in the laboratory, workshop and outdoor scene. At the same time, it can work both in the principle of electromagnetic induction and eddy current, and complete different tasks of coating thickness measurement.
| Measurable Coating: Any non-magnetic coating of magnetic material surface; any Insulation Coating of non-magnetic metal surface | |
| Menu design for easy operation | |
| Continuous and single measurement method | |
| Direct mode and group mode | |
| Values displayed: average, maximum, minimum, standard deviation, statistics | |
| One point or two-point calibration very convenient | |
| 320 measurements can be stored for downloading to the computer | |
| Delete the measurement data and the data group Real-time | |
| High and low limit alarm | |
| Low power and error | |
| USB to transfer data to the computer for analysis | |
| Automatic power off function can be set |
Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc.
| Vibration Pickup | Piezoelectric Ceramic Accelerometer(shear-type) |
| Acceleration | 0.1~199.9m/s2 |
| Velocity | 0.1~199.9m/s |
| Displacement | : 0.001~l.999mm |
| Acceleration Frequency Range | : 10HZ~1KHZ(LO) 1KHZ~1SKHZ(HI) |
| Velocity Frequency Range |
10HZ~1KHZ |
| Displacement Frequency Range |
10HZ~1KHZ |
| Accuracy | ±5%H±2digits |
| Singnal Output | AC output |
| Auto Switch Range | |
| Backlight | |
| Auto Power off | |
| PACKING INFORMATION | |
| Power | AAA*1 battery |
| Product Net Weight | 60g |
| Product Size | 150*40*20mm |
| Packing | Gift box |
| Standard Quantity Per Carton | 40PCS |
| Standard Carton Size | 52*40*49cm |
| Standard Carton | Gross Weight 1SKG |
This Digital Sound Level Meter is an instrument to measure Sound Pressure Level in decibels (dB). This meter is featured with wide measuring range (40 130 dB), Bar-Graph Indication, A/C frequency weighting, Fast / Slow response and Maximum Hold function. The meter also provides a windscreen to filter-out unwanted signals. Moreover, the meter can connect to PC for Data Logging with optional USB cable. This is a portable, easy to use and handy instrument for sound quality control in office, home, school and construction site. The meter has wide range of applications such as noise pollution studies, research and other industrial use.
| 100% BRAND NEW! | |
| Weight 210g | |
| Size (Approx) 23.5 x 7.0 x 3.0cm | |
| Wide measuring range 40130dB (decibels) | |
| Two equivalent weighted sound pressure levels, A and C | |
| Fast and Slow dynamic characteristics modes | |
| Max locked function has the maximum value, after the stent-in-one unique, easy to use | |
| AC Analog Signed Output for frequency analyzer level recorder or X-Y axis, FFT analyzer, graphic recorder, etc. to do statistical analysis of data logger | |
| Auto power off function | |
| Low battery indicator | |
| Overload prompts | |
| Portable, easy to use and handy | |
| Instantaneous sound measure function | |
| Tripod Mounting option | |
| Passed the high standards of IEC651 TYPE 2 & ANSI S1.4 TYPE 2 for sound level meters |
| Sound Level | 40 ~ 130 dB With Level Selecting Button Switches |
| level 1 | 40 ~ 70dB |
| level 2 | 60 ~ 90dB |
| level 3 | 80 ~ 110dB |
| level 4 | 100 ~ 130dB |
| level 5 | 40 ~ 130dB |
| Accuracy | ±2dB (under reference condition) |
| Measuring Level | : 40~130dBA, 40~130dBC |
| Frequency Range | 31.5 Hz ~ 8.5 kHz |
| Linearity/Dynamic Range | 30dB |
| Frequency weighting | A and C features |
| Digital LCD | 45 x 35mm with 4 digits, Resolution: 0.1dB, Display: 0.5 secretary |
| Sampling Rate | 2 times/second |
| Dynamic Characteristic (Time weighting) | FAST (high speed) / SLOW (low speed) |
| 1 bar graph represents 1dB in the Analog Bar Graph | |
| Bar Graph | 50dB scale at 1dB step for monitoring current sound pressure level display period of 50mS |
| Level Ranges | 40 ~ 70dB, 60 ~ 90dB, 80 ~ 110dB, 100 ~ 130dB, 40 ~ 130dB |
| Load indication | Use the symbol OVER (indicating over range) and UNDER (indicating less than lower limit of the range) |
| AC output | 0.707 Vrms at FS output impendance aprrox. 600L |
| Microphone | 1/2 inch electret condenser microphone |
| Maximum Hold | |
| Working Environment | Temperature: 0~40°C (32~104°F), Humidity: 10~70% RH |
| Storage Environment | : Temperature: -10~50°C (14~122°F) , Humidity: 10~80% RH |
| Power Supply | 6F22 9V alkaline cells/battery or DC 9V 100mA (not included) |
This is a brand new luxmeter, LX1010BSD, which can measure up to 100, 000 lux, approximately 5, 000 footcandles. It's used for checking the level of luminance, luminance is a measure of the amount of light falling on a surface. It is defined as: 'the density of the luminous flux incident on a surface'. It is the quotient of the luminous flux by the area of the surface when the latter is uniformly illuminated. - (E = df / dA). This convenient gadget is widely used in many areas such as construction, inspection, photography and etc.
| Range | 0- 2,000/20,000/100,000 Lux (± 5%+2D); |
| Accuracy | 5.0%; |
| Resolution | 1 Lux; |
| Sampling time | 0.4 second; |
| Dimensions: | |
| Body | 4 1/2" X 2 3/4" X 1 1/8"; |
| Sensor | 3 1/4" X 2" X 3/4"; |
| Weight | 160 grams. |
Humidity & Temperature meter SE-AR827
This is a brand new Omicron D129 CE certified digital sound / noise level
datalogger. This meter has a built-in USB port which connects to a Windows
PC for uploading the recorded data. This is an ideal instrument for noise
monitoring in factory, school, business and traffic areas. This meter conforms
to the IEC61672-1 Class 2 standards. This device operates on a 3.6V Lithium
battery. This device is very accurate (+/- 1.4 dB) and durable, an ideal companion
for your field projects
Please note that the FREE Windows software is provided AS IS. There is no
software development kit nor engineering support for the software.
| Conforms to the IEC61672-1 Class 2 for sound level measurement | |
| NORM and PEAK mode | |
| Over range indication | |
| A & C frequency weighting | |
| Fast (125ms) and slow (1s) time weighting | |
| Calibration via software | |
| Manual and automatic start modes |
| Accuracy | +/- 1.4 dB |
| Frequency range | 2sec.to 24h |
| Dynamic range | 0.4 to 30.0m/s |
| Measuring ranges | 0.1 m/s |
| Time weighting | ±3.5% or ± 0.2 m/s |
| Slow: 1 sec | |
| Microphone | 1/2 inch electret condener microphone |
| Data memory | 129920 samples |
| Battery life | about 240 hours |
| LED indicator | Green (operating) and Yellow (memory full) LED |
| OS compatibility | Windows 2000, XP or Vista |
This product is applied to measure the light scattering degree produced by the not-dissolved particles in the suspended transparent or opaque liquid and measure the content of these suspended particles.
Waterworks: turbidity monitoring of reservoir, well, clean water pool, filter, filtered, precipitation and water treatment plant
Industrial process: water quality monitoring of production recycled water, recycled water, etc.
Sewage treatment: water quality of inlet and outlet
Online turbidity measurement of electric, pure water, beverage, wine and pharmaceutical industries
| ||||||||||||||||||
| Measurement Range | 0 ~ 20NTU, 0 ~ 200NTU, 0 ~2000NTU, 0 ~ 100mg/l, 0~1000mg/l |
| Accuracy | ±2%FS |
| Reproducibility | better than reading ±1.0% |
| Response time | 1S (can be adjusted) |
| Velocity of flow | 100-700ml/min |
| Temperature | 0°C to 40°C |
| Cable Length | Standard 10m, The maximum length 100m |
| Protection | IP68 |
| Water pipe | 1/4”NPT Internal thread, 1/4” Compression fittings (provided) |
| Drainage pipe | 1/2”NPT Internal thread, 1/2” Hose(provided) |
| Transmitter | |
| Analog output | 4~20mA |
| Digital output | MODBUS/RS485, MODBUS/RS232 |
| Output relay | Four alarm system , 250VDC, 3A, all the way to the cleaning system 250VDC, 3A |
| Frequency of reading | 0.5S one time |
| Power supply | 90-265VAC, 50/60HZ |
| Protection | IP65 |
| Installation | Wall-mounted |
| Size | 210/105/185mm, L/W/H |
ORP1001 ORP Transmitter is one easy to use wall mounting transmitter for
continuous monitoring. Available without the LCD display, the transmitter can transmit the ORP value of your solution with a very high accuracy with added option of self calibration. With Internal temperature compensation, ORP 1001 delivers fast and high accuracy. Precision ORP transmitter immediately detects changes in the ORP of the solution. With a 230V AC power supply, This instrument features BNC composite electrode making it easier in the world to facilitate the replacement of used electrodes.
| Low Cost OEM Series | |
| Wide Temperature Range | |
| Glass with Plastic Construction Sensor | |
| Compact Version | |
| Surge Protection | |
| Over Voltage Protection |
| EC Range | 0 - 1000 mV (Other Ranges Available On Demand) |
| Accuracy | ±3 mV |
| Operating Temp. | - 20 C to 70 C |
| Storage Temp. | - 30 C to 85 C |
| Power Supply | 230V AC |
| Electrode Connection | BNC Pins |
| Electrode Type | mV |
| Output | 4-20 mA, 2 Wire |
| Enclosure | ABS Moulded Housing |
| Mounting | DIN Rail Mounting |
| Calibration | Offset ±50 mV |
TDS691 Conductivity Transmitter is one easy to use wall mounting transmitter for
continuous monitoring. Available without the LCD display, the transmitter can transmit the TDS value of your solution with a very high accuracy with added option
of self calibration. With Internal temperature compensation, TDS691 delivers fast and high accuracy. Precision TDS transmitter immediately detects changes in the Concentration of the total amount of dissolved solids in the solution. With a 230V AC power supply, This instrument features 2 wire electrodes making it easier in the world to facilitate the replacement of used electrodes.
| Low Cost OEM Series | |
| Wide Temperature Range | |
| Precision Indication of TDS with Current Output | |
| Compact Version | |
| Automatic Temperature Compensation | |
| Weatherproof / Fireproof ABS IP55 Enclosure |
| TDS Range | 0 ~ 1000 ppm (Other Ranges Available On Demand) |
| Accuracy | ±1% of F.S |
| Operating Temp. | - 10 C to 50 C |
| Storage Temp. | - 30 C to 85 C |
| Power Supply | 230V AC |
| Electrode Connection | 2 Wire Electrodes |
| Electrode Type | mV |
| Output | 4-20 mA, 2 Wire |
| Enclosure | ABS Moulded Housing |
| Mounting | Wall Mounting |
| Calibration | Internal Span and Zero using Potentiometers |
The ADP13 and ADP13 transmitters include high precision and stability sensors for measuring relative humidity and temperature.They are microprocessor based devices and, therefore, allow being entirely configured through an RS485 interface using the Modbus RTU command.The DigiConfig software allows the configuration of all transmitter features as well as its diagnostic procedure.The ADP13 model is intended for wall mounting while the ADP13 model is equipped with an elongated sensor rod for installation in ducts or through walls
Features : | |
The transmitter can be configured for displaying the values of measured Temperature and Relative Humidity, or the values of measured Temperature and Dew Point, or the values of measured Relative Humidity and Dew Point, or the value of measured Temperature only. The communication parameters can be easily field-configured.The values for communication address, baud rate and parity can be changed using the frontal button without the need for using the configuration software. |
| Sensor measuring range | : | Temperature: -40.0°C to 100.0°C (-40.0°F to 212.0°F) |
| Relative Humidity (RH): 0.0 to 100.0 % RH | ||
| Dew Point: -40.0°C and 100.0°C (-40.0°F to 212.0°F) | ||
| Measuring resolution | : | Temperature: 0.1°C, 14 bits (16383 levels) |
| Relative Humidity: 0.1 %, 12 bits (4095 levels) | ||
| Response time | : | Temperature: up to 30 s in slow air movement |
| Humidity: up to 8 s in smooth air movement (20 to 80%RH) |
||
| Measurement accuracy | : | refer to figure |
| Interval between sampling | : | 3 seconds |
| Power supply | : | 12 Vdc to 30 Vdc |
| Protection class | : | Electronic enclosureIP65; |
| Sensor capsule | : | IP40 |
| Dimensions | : | 60 x 70 x 35 mm |
| Transmitter operation tempt | : | from 0°C to 70°C |
| Electromagnetic compatibility | : | EM 61326:2000 |
| Polycarbonate enclosure | ||
| Connection cable is included |
This is a great moisture meter for any hobby or professional woodworker and craftsman. It is small and lightweight, so you can use it in your shop or take it with you to check the quality of the wood you buy. It is also a great tool to detect damp, rotting wood or wet walls when you inspect your home. This is the NEW improved 2-pin version, it is easier to insert and it will leave only 2 little holes instead of 4!
| Display | Large, easy to read LCD display |
| 2 steel pin probes for high resolution & sensitivity | |
| Measuring Range | 5% - 40% |
| Resolution | 1.00% |
| Accuracy | ±1% |
| Data Hold button | |
| Battery | 1x 9V (not included!) |
| Dimensions | 5x2.75x1.25 inch (126×70×29mm) |
