Our Products
In order to keep up the high-standards, we ensure from the very beginning that the raw materials used are as per the international standards. By this, we are capable of delivering the finest array of products. We have parted our infrastructure into several units and one of them is storehouse. We update Booster Pump (1440 RPM) on regular basis so as to meet stated industry standards.
Specifications
Power Range | 0.5 HP. & 1.1HP |
Version | 220-240V, 50 Hz, A.C-1 Phase, Capacitor Start & Capacitor Run (CSCR) |
Speed | 1440 rpm |
Duty | S1 (Continuous) |
Degree of Protection | IP 54 |
Insulation | Class B |
Discharge | 30 - 55 Ipm. |
Head Range | 12 - 32 mtrs |
Suction lift up to | 8 mtr. |
Suction x delivery size | 25x25 mm |
Material of Construction | |
Pump Casing | Cast Iron |
Motor Body | Cast Iron |
Impeller | Bronze |
Shaft | E.N. 8 |
Sealing | Mechanical Seal (Carbon V/s Ceramic) |
Application in :
APPLICATION
Ideal for Drainage system in domestic, public places and commercial institutes.
To drain out chemical waste in industrial plants.
In main vent lines in drainage schemes.
Water recharging systems.
Dewatering purpose of Sewerage
SPECIAL FEATURES & IDENTITY
SWR pipes are strong, sturdy, unbreakable with high durability.
Resistant to termite, bacteria and fungus growths.
Light weight, therefore easy to handle and join.
Smooth internal surface results in more discharge and less frictional loss.
Leak proof due to precision design and dimensions.
Fire resistant and non conductor of electricity.
Unaffected by weather conditions thus rust free.
Requires no painting.
Damage from UV sun rays is prevented due to presence of UV stabilizers.
SALIENT FEATURES
O-Ring seal socket provides strong, Durable & Leak proof fitting
Easy to handle and join
Resistant to rust, UV radiation
Safe and Economical
Maintenace free
Better strength to weight ratio
PHYSICAL PROPERTIES
Co-efficiant of Linear expansion8x10-2mm/mk
Surface resistance 10.12 ohm
Thermal conductivity 0.15 w/mk
Madulus of elasticity3000 N/mm2
APPLICATION
Usage in open and concealed wiring in industries, commercial institutes, buildings & residential sector.
For Wiring connection of pumps, motors & house meters.
For Connection of traffic signal & street lights.
Concealed wiring of transpontation like buses, railway coach, ships air crafts etc.
SALIENT FEATURES
Easy to cut & join without special tools & easy to install.
Smooth inside surface prevents damage of wire, hence easy to pull and place the conductors and wires even through 90 bends
Weight almost 1/5th of steel and 1/2 of aluminum, thus easy to transport & handle.
Can be laid direct without any protection.
Resistant to acids, alkalis, salt solutions and many other checmicals.
Conduit pipes has high tensile and impact strengths.
It is resistant to direct sunlight, heat and favorable for all weather condition.
Resistant to macro and micro-organisms, fungi, rodents and corrosive factors. hence can be used for longer tenure.
Compound used in manufactruing is self extinguishing material that does not support combustion. The material has that property of not burning further one flame is put off. Neither it burns without a flame being directly applied to it.
APPLICATION
For installtion in agriculture borewell casing and domestic water application.
In industrial mining and chemical distribution.
Designed for clean & clear water distribution form borewells. shallow or deep wells.
SALIENT FEATURES
Easy handling
Corrosion free and fire resistant.
Best tensile strength for prolonged usage.
For maximum yield of water.
Easy joining & installation.
APPLICATION
These pipes are useful CBS sector in building constructions for water supply to Bathrooms, Kitchen Sinks, Washbasin & Laboratories.
It can be used in Residential Complexes, Individual Houses, Flats, Offices, Hotels, Hospitals, Bus Stations, Railway Stations and institutes to transfer water.
Distribution of Water in Industries, Agriculture, Telecommunication, Irrigation & Projects etc.
SALIENT FEATURES
Frictional are reduced due to smooth surface finish.
Ideal for pure & hygienic water supply
Special coloured line marking to identify the right selection.
Resistant to Corrosion
Weather Resistance
Easy to Installation
Fire and Termite Proof
Good Thermal and Electrical Insulation
Inert to Chemical
Properties remain unchanged up to temperature 60c continues and 90c for short time
APPLICATION
Water lifting from Pumps for Agriculture & Domestic Purpose.
For Slag & Chemical distribution .
An ideal replacement for MS, PPR, ERW, GI, HDPE and SS Column Pipes.
Corrosion, chemical reaction and erosion is almost negligible on uPVC, thus ideal usage in salty, sandy and chemically aggressive water, without any effect over prolonged use.
Installation depth up to 350 meters
SALIENT FEATURES
Extremely smooth surface finish of this pipe reduces the hydraulic friction losses and increase flow of water up to 30% and power consumption up to 20%.
Presence of Internal and External Square threaded spigot ends and rubber gasket results in easy, reliable joining and pressure sealing.
Special square thread gives quick & easy installation facility and capable of high load bearing capacity.
Provision of inside sealing ring checks the unsteady movement or jerks, prevents leakage from joints and over tightening.
Step ring prevents leakages and control the vibration and over tightening.
Inkjet printing & Hallmark to prevent duplication in market & ensures original genuine products.
Outer ring to prevent leakage and over tightening.
Strengthened Coupler for higher load pulling strength and maintenance free jointing system over period of time.
Cost Effective, Energy Saver with long life span.
Absence of Electrolytic Deposition formation.
Easy Installation & handling
Safe for irrigation purpose.
OSWALRegenerative self priming monoblock pumpset are powered by a totally enclosed fan cooled, AC induction motor, complete absence of suction trouble, suitable for long hours duty. Motor stator is made of low watt loss steel laminations assembled under pressure with rigidly in the frame. Well-balanced rotor ensures vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance power. Shaft made out of best quality steel, precision ground of ample size, which helps to transmitting the rated Horsepower. All single-phase versions up to 1.0 HP are incorporated with Thermal Over load protector. Application of Regenerative self priming monoblock pumpset is in Hospitals, Water circulation systems, Water supply systems of Gardening, Nurseries, Domestic water supply, Multi-storey Building & Industries.
OSWALRegenerative self priming monoblock pumpset are of good self priming capacity, dynamically balanced rotating parts, optimal design, High operating efficiency, high working pressure & designed for wide voltage fluctuations.
Application in :
Water supply in Houses, Instltutes & Hospitals
Hydro circulation systems.
Watar for Gardening & Nurseries.
Water supply in Multi-storey Buildings.
Usage in Ultra-filtration system.
The all new OSSL series of Solar Submersible Pumpset has been introduced by OSWAL, which is a state of art technology product designed to provide eco-friendly and energy efficient solution. Oswal OSSL Series Stainless Steel Submersible pumpset is more suitable for Solar Pumping system. Our Submersible water pump is anti-corrosion in nature and provides high wear resistance. It reduces the running costs due to its high pumping efficiency and longevity. It can work continuously for a longer period of time without any trouble which results in high reliability and provide best results.
# Ideal for remote areas where electricity is not available.
# Drip Irrigation & sprinkler for farms
# Water supply for schools, hospitals, homes, institutes & Government establishments.
# Industrial applications.
Suitable for day time Irrigation, continuous output for 6-8 hours in a day. We offer Submersible pumps with energy-efficient duty point ranging from 1-50 m/h. Complete range of pumps & motors which as a standard are made completely of stainless steel AISI-304. This provide for good wear resistance and a reduced risk of corrosion when pumping normal cold water with a minor content of chloride. Stainless Steel means less weight which facilitates easy handling of pumps and results in low equipment and installation cost and service time. In addition pumps will be as new even after long application tenure due to the high wear resistance of stainless steel. OSSL series contribute to clean & pollution free energy without any harm to nature. OSWAL has the best range of BEE 5 Star Rated Stainless Steel of Submersible Pumps.
Application in :
Rural water supply from borewell
Domestic & agriculture Supply
Farms & Irrigation.
Civil & lndustrlal.
Water supply systems of Government
OSWALElectrical Control Panels are applicable for power supply and to resist fluctuation in voltage for smooth running of pumps. These are effectively used with submersible pumps and openwell pumps for protection from overloads and short circuits. Panels are made of good quality powder coated MS sheet which is durable and weather proof even in extreme humidity levels. Materials best installed in accordance with high quality standards with every unit manufactured is passed through stringent quality checks thus ensures durability, high performance and trouble free operation.
Specifications
Version | 200-240V-1 phase, A.C, 50 hz |
---|---|
HP Compatibility | 0.5-7.5 HP |
Body | Powder Coated ms sheet |
OSWALBooster Pumps are powered by a totally enclosed fan cooled, AC induction motor, complete absence of suction trouble, suitable for long hours duty. Motor stator is made of low watt loss steel laminations assembled under pressure with rigidly in the frame. Well-balanced rotor ensures vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance power. Shaft made out of best quality steel, precision ground of ample size, which helps to transmitting the rated Horsepower. All single-phase versions up to 1.0 HP are incorporated with Thermal Over load protector. Application of Regenerative self priming monoblock pumpset is in Hospitals, Water circulation systems, Water supply systems of Gardening, Nurseries, Domestic water supply, Multi-storey Building & Industries.
OSWALRegenerative self priming monoblock pumpset are of good self priming capacity, dynamically balanced rotating parts, optimal design, High operating efficiency, high working pressure & designed for wide voltage fluctuations.
Application in :
Domestic Multi storay
Water supply in Resorts. small landscapes.
Washing Purpose
Civil applications in hospitals,
Water supply in Institutes.
OSWAL OCHP -Pressure boosting Series are the product of the expertise gained from over four decades of experience, endurance and workmanship. OSWAL products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.
Pressure Tank
Pressure tank is one another reliable product from the house of OSWAL having over 1 decades of expertise in pump industry . Pressure tanks are ingeniously designed with perfection for delivering optimal performance. The butyl/natural rubber membrane provided in all the models ensures finer and trouble free performance. These tanks are used for pressure boosting applications to fetch self-sustained supply of pressurized water in the pipeline evermore especially in houses, apartments & hotels.
Pressure tank eliminates the need of overhead tanks & float switch. The electro mechanical control, switches ON & OFF the pump automatically whenever pressure reaches the minimum & maximum level of preset pressure. The smaller capacity tanks are vertical in shape, which can be fixed direclly to the outlet of the pump, whereas bigger capacity tanks are horizontal / vertical in shape with legs and the pumps can be fitted over the platform provided on the top. A 5 way connector , electro mechanical control, hose connector & pressure gauge are the common accessories used along with the pressure tanks. The pressure can be preset. The pressure will be developed In the membrane based on the maximum operating head (in bars) of the pump.
Advantages
Sets free from operating the pump every time
Eliminates need of overhead tank &float switch
High quality food grade rubber membrane for hygiene water supply
Ensure uninterrupted water supply with adequate pressure always
Saves water , electricity & time
Designed for easy installation
Electronic Pressure Control SwitchElectronic Pressure Control Switch is yet another quality & reliable product from the house of which is carefully designed to regulate the water pressure in the domestic water supply system. It switches ON the pump automatically whenever there is a pressure drop in the pipeline and maintains preset level of pressure in the pipe line. It also switches off the pump automatically whenever pumping is not required and there by makes the entire pumping system effective and efficient. The preset pressure level drops as and when the water is drawn. Likewise once the pipeline is closed it completely switches OFF the pump automatically after few seconds. The inbuilt check valve & logic circuit system protect the pump from back flow of water & dry running which enhance the life span of the pump. Certain models of vertical type pressure controls are inbuilt with adjustable pressure gauge wherein the pressure can be set manually based on the requirement.
Application in :
Water pressure for Residential & Commercial establishments.
Water distrubution in Industries & small farms.
Hotels & Multistory Buildings
Apartments and Bungalows
Commercial washing purpose
Specifications
OCHP Series | |
---|---|
Power Range | 0.5 Hp -2 HP in 1 & 3 Phase |
Version | 200 -240 V in 1 Phase 380-415 V in 3 Phase, A.C, 50 Hz |
Discharge Range | 13 -117 lpm |
Head Range | 20 - 41 mtr. |
Outlet sizes | 25x25 mm |
Water temperature | 50oC |
Speed | 2880 rpm |
Ambient temperature/temperature rise | 55oC |
Insulation | Class B |
Degree of protection | IP 54 |
Main Dimensions (mounting) | Foot Mout -96 x 155 mm Suitable for 8 mm /10 Bolt |
Tank Capacity | 24, 36,60,80 & 100 lts |
Suitable Outlets | 2,3,5,7 & 10 taps |
Material of Construction | |
Delivery x Suction Head | Cast Iron |
Motor Body | Aluminum |
Impeller | Stainless Steel |
Diffuser | Stainless Steel |
Shaft | SS -410 |
Mechanical Seal | Carbon V/s Ceramic |
Base Plate | Mild Steel |
Application in :