P. K. Engineering

Edamalaipatti Pudur, Tiruchirappalli, Tamil Nadu

Spring Mounts (Vibro-SM) are made of high-grade materials and components and are set in conformity to the international standards. They are highly functional devices that are doled out quality tested. Their durability and longevity brackets them with the desirable Spring Mounts of such type. We are emerging as the promising Manufacturer, Exporter, and Supplier of Spring Mounts (Vibro-SM) from Tamil Nadu, India.

Features :

• Suitable for low-frequency vibration control
• Adjustable height and machine alignment
• Protection from lateral displacement
• Internal elastic gasket for reduction of resonance
• Steel casing for greater strength

Vibro-SM TYPE 1 :

• Anti-vibration mounts Vibro-SM are used for low frequency vibration control (rotational machinery 300 RPM upwards).
• The casing is made of steel with adequate thickness and is protected from oxidation with a special anticorrosive paint.
• The anti-vibration springs comply with ISO.EN.10270 standards and have a color indication to define the maximum load capacity.
• An adjustable height system exists, in order to align the machine.

Vibro-SM TYPE 2 :

• At their base, they have a special elastic profile, resistant to outdoor conditions, thus offering better isolation efficiency at high frequencies.
• Anti-vibration mounts Vibro-SM have been designed to face lateral forces (earthquake and wind-pressure protection).
• An elastic gasket is interceded between the two vertical reinforcements, to avoid creating a sound-bridge.
• Also through the friction that is developed, the phenomenon of resonance is decreased, during the beginning and the end of the machine operation.
• Vibro-SM can be combined at the bottom with an elastic pad, named Vibro-EP, to ensure the control of vibration at a wider range of frequencies (Vibro-SM Complex).

Spring Mounts (Vibro-MS) are high-quality devices that are made obtainable without any flaw. Their efficiency and fineness makes them stand out from the lot available to the market. We are referred to as the leading Manufacturer, Exporter, and Supplier of Spring Mounts (Vibro-MS) from Tamil Nadu, India. We ensure that our products last long, proving themselves even under trying conditions.

Details :

• Vibro-MS is an anti-vibration mount with multiple springs.
• It is specially designed to have low height (type L) and is very effective with low frequency vibrations.
• The special elastic base acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the springs.
• The springs are fixed with innovative fastening system.

Our Spring Mounts (Vibro-AM) are easy-to-install devices that are reckoned suitable for low-frequency vibration control. They are passed through stringent quality tests before making them available to the global market. We are grouped with the premier Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-AM) from Tamil Nadu, India. We can entertain the demand for customization.

Details :

• At their base, the anti-vibration spring mounts Vibro-AM have a metal plate with adequate thickness and a special elastic profile, resistant to outdoor conditions, thus offering better isolation efficiency at high frequencies.
• Both the metal plate and the elastic profile have two holes for fixing with pass-through bolts at the base of the spring mount.
• At the upper part of the spring mount, there is a M8 bolt for adjusting them to the machinery.
• The spring complies with the requirements of ISO EN 10270.

Applications : Antivibration spring mounts Vibro-AM are used for low frequency vibration control (slow speed rotation 400 RPM upwards) such as compressors, two-cycle engines, coolers, air handling units etc

We cater for the global market with high-performance Spring Mounts (Vibro-AMR). We are enlisted with the top-notch Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-AMR) from Tamil Nadu, India. From designing to development and quality assurance, we conquer each stage and succeed in coming up with flawless products.

Details :

• The new product load range starts from small weights (15 kp) and can go up to 150 completing the anti-vibration product range for restrained mounts.
• The housing of Vibro-AM.R is designed to limit vertical and horizontal movement of the isolated equipment and offers a seismic protection.
• VIBRO AMR spring isolator offers protection in all directions and is a complete anti-vibration spring mount that can be primarily used for low frequency vibration isolation.
• That is most commonly used for vibrating machinery of low speed rotation (on 400 rpm upwards).
• It is mostly used in applications that require a spring isolator with lateral and vertical anti-vibration restrain.
• VIBRO AMR offers additional protection from earthquakes and excess wind pressure, such as air compressors, two-cycle engines, chillers, water coolers, air handling units etc.
• The rubber profile at its base acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the springs (optional).

Field of applications :

• Vibro-AM restrained is recommended to be used for mechanical Noise & Vibration isolation for :
• Vibrating equipment is likely to be subjected to seismic events
• When the vibrating equipment is likely to significant center of mass alternations
• When high wind loads or other external forces are applied.

We make available the finest Spring Mounts (Vibro-MSR) to various industries across the globe. We are counted among the eminent Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-MSR) from Tamil Nadu, India. The designs of the devices are innovative, and they are finished to perfection. They are tested on all crucial parameters such as functioning, quality, life, etc. Count on us!

Details :

• The new product in the spring mounts category offers a load range starts from small weights (50kp) and can go up to 750 per mounting point completing the anti-vibration product range for restrained mounts.
• The housing of Vibro-MS.R is designed to limit vertical and horizontal movement of the isolated equipment and offers a seismic protection.
• Vibro-MSR is a vibration control mount with multiple springs that can offer multi-directional restrain.
• It can be used at low frequency vibration control applications (low speed rotation 400 rpm upwards) for heavy load machinery where lateral and vertical support and protection from earthquakes and excess wind pressure is needed.
• Typical applications are air compressors, two cycle engines, chillers, water cooling towers, air handling units etc.
• The spring isolator Vibro-MSR with its innovative design can offer simultaneously seismic control protection, successfully sustaining of wind pressure lateral forces and at the same time, reduce the transmission of vibration to supporting structures.
• The rubber profile at its base, acts as a sound break and increases the isolation efficiency in high frequencies, that could be transmitted through the springs (optional).

Field of applications :

• Vibro-MSR restrained is recommended to be used for mechanical noise & vibration isolation for :
• Vibrating equipment is likely to be subjected to seismic events
• When the vibrating equipment is likely to significant center of mass alternations
• When high wind loads or other external forces are applied

Spring Mounts (Vibro-MSV), which roll off our manufacturing units, stand high in efficiency and quality. They are known for their high performance and long service life. Their quality is ensured to match the desired level by our team of quality controllers. We are standing amid the notable Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-MSV) from Tamil Nadu, India.

Details :

• Vibro - MSV is an anti-vibration spring mount with viscous damping for increased vibration isolation and very low natural frequency.
• Vibro-MSV is an anti-vibration mount with multiple springs.
• It is specially designed to have low height and is very effective with low frequency vibrations due to the viscous material.
• The elastic base acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the springs.
• Vibro-MSV is used for vibration control of machinery mounting with low excitation frequency, with amplitude variation, due to varying speeds of rotating machines.
• That is primarily useful in HVAC, mechanical and industrial applications that require vibration isolation.
• This mount is specially designed to absorb low frequency vibrations and restrict the excited motion and shock of perturbing vibrations at resonance point.
• The springs are fixed with an innovative fastening system to their metal base.
• The silicon fluid, filled with appropriate viscosity in different centistokes rate, can provide damping forces in all directions of freedom.
• The rubber base (upon request) acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the metal structure of the springs.
• Vibro-MSV is recommended for heavy loads.

We are a celebrated Manufacturer, Exporter and Supplier of Spring Mounts (Vibro-MSH) from Tamil Nadu, India. We are backed by a team of skilled and experienced personnel who makes use of top-notch quality metal that is durable and non-corrosive. As far as the cost is concerned, the Spring Mounts are provided by us at the modest prices.

Details :

• Vibro-MSH is an antivibration mount with multiple springs for very heavy equipment
• It is specially designed to absorb low frequency vibrations (i.e. reciprocating machines)
• Additionally the special design profile of its rubber base, acts as a sound break and increases the isolation efficiency in high frequencies that could be transmitted through the springs
• The springs are fixed with an innovative fastening system to the metal base