Write a Review
Our Product / Services
Our offered Product range includes Rope Termination Anchor, Quick Release Ankle Height Black Leather Safety Shoes, High Ankle Rigger Dark Brown Leather Safety Shoes, Executive Sporty Lace-up Brown Leather Safety Shoes and Executive Sporty Lace-up Black Leather Safety Shoes.
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 3 | 1 | 3 | 1 | X |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 3 | 1 | 3 | 1 | X |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 3 | 1 | 3 | 1 | X |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 3 | 1 | 3 | 1 | X |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 4 | 1 | 2 | 1 | X |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 4 | 2 | 4 | 3 | B |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 4 | 4 | 4 | 3 | C |
| Abrasion Resistance | Blade Cut Resistance | Tear Resistance | Puncture Resistance | TDM Resistance |
| 4 | 5 | 4 | 3 | D |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) | Requirement as per standard- 80% | Exceeds 90% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.5% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 90% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) | Requirement as per standard- 80% | Exceeds 90% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.4% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 90%c |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) |
Requirement as per standard- 80% | Exceeds 90% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.5% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 90% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) | Requirement as per standard- 80% | Exceeds 90% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.4% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 90%c |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) |
Requirement as per standard- 80% | Exceeds 90% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.5% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 90% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) | Requirement as per Standard- 94% | Exceeds 97% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.6% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 99% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) | Requirement as per standard- 94% | Exceeds 97% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.4% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 99% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) | Requirement as per standard- 94% | Exceeds 97% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| Performance Requirements Tested as Per Various Clauses Of IS 9473:2002 | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.6% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 99% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) |
Requirement as per standard- 94% | Exceeds 97% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.5% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 99% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002) |
Requirement as per standard- 94% | Exceeds 97% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002) | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.6% |
| Flammability (Clause 5.6 of IS 9473:2002) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 99% |
| Vital Test | Requirement as per Standard | KARAM Respirator |
| Particulate Filtering Efficiency (Clause 5.4.2 of IS 9473:2002 and EN 149:2001+A1:2009) |
Requirement as per standard- 80% | Exceeds 90% |
| Breathing Resistance (Clause 5.11 of IS 9473:2002 and EN 149:2001+A1:2009) |
|
|
| Total Inward Leakage (Clause 5.4.1 of IS 9473:2002 and EN 149:2001+A1:2009) |
|
|
| CO2 Content of Inhalation Air (Clause 5.7 of IS 9473:2002 and EN 149:2001+A1:2009) |
Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | < 0.5% |
| Flammability (Clause 5.6 of IS 9473:2002 and EN 149:2001+A1:2009) | The face mask when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | KARAM Respirator does not continue to burn after removal of flame |
| Bacterial Filtering Efficiency | Bacterial filtering efficiency should be >90% | > 99% |
| Testing Parameters | Class 1 | Class 2 | Class 3 |
| Minimum Bacterial Filtration Efficiency | 95% | 98% | 98% |
| Maximum Differential Pressure | 29.4 Pa | 29.4 Pa | 49.0 Pa |
| Minimum Splash Resistance | - | - | 120 mm Hg. |
| Minimum Sub-micron Particulate Filtration at 0.1μ | - | - | 98% |
| Testing Parameters | Class 1 | Class 2 | Class 3 |
| Minimum Bacterial Filtration Efficiency | 95% | 98% | 98% |
| Maximum Differential Pressure | 29.4 Pa | 29.4 Pa | 49.0 Pa |
| Minimum Splash Resistance | - | - | 120 mm Hg. |
| Minimum Sub-micron Particulate Filtration at 0.1μ | - | - | 98% |
| Size Chart-Body Dimensions | ||
| A | B | |
| Garment Size | Body Height (cm) | Chest Width (cm) |
| S | 164-170 | 84-92 |
| M | 170-176 | 92-100 |
| L | 176-182 | 100-108 |
| XL | 182-188 | 108-116 |
| XXL | 188-194 | 116-124 |
| XXXL | 194-200 | 124-132 |
| Size Chart-Body Dimensions | ||
| A | B | |
| Garment Size | Body Height (cm) | Chest Width (cm) |
| S | 164-170 | 84-92 |
| M | 170-176 | 92-100 |
| L | 176-182 | 100-108 |
| XL | 182-188 | 108-116 |
| XXL | 188-194 | 116-124 |
| XXXL | 194-200 | 124-132 |
| Note that these sizes relate to the body size of the wearer and not actual garment dimension | ||
| Size Chart-Body Dimensions | ||
| A | B | |
| Garment Size | Body Height (cm) | Chest Width (cm) |
| S | 164-170 | 84-92 |
| M | 170-176 | 92-100 |
| L | 176-182 | 100-108 |
| XL | 182-188 | 108-116 |
| XXL | 188-194 | 116-124 |
| XXXL | 194-200 | 124-132 |
| Note that these sizes relate to the body size of the wearer and not actual garment dimension | ||
| Size Chart-Body Dimensions | ||
| A | B | |
| Garment Size | Body Height (cm) | Chest Width (cm) |
| S | 164-170 | 84-92 |
| M | 170-176 | 92-100 |
| L | 176-182 | 100-108 |
| XL | 182-188 | 108-116 |
| XXL | 188-194 | 116-124 |
| XXXL | 194-200 | 124-132 |
| Note that these sizes relate to the body size of the wearer and not actual garment dimension | ||
| Size Chart-Body Dimensions | ||
| A | B | |
| Garment Size | Body Height (cm) | Chest Width (cm) |
| S | 164-170 | 84-92 |
| M | 170-176 | 92-100 |
| L | 176-182 | 100-108 |
| XL | 182-188 | 108-116 |
| XXL | 188-194 | 116-124 |
| XXXL | 194-200 | 124-132 |
| Note that these sizes relate to the body size of the wearer and not actual garment dimension | ||
| Size Chart-Body Dimensions | ||
| A | B | |
| Garment Size | Body Height (cm) | Chest Width (cm) |
| S | 164-170 | 84-92 |
| M | 170-176 | 92-100 |
| L | 176-182 | 100-108 |
| XL | 182-188 | 108-116 |
| XXL | 188-194 | 116-124 |
| XXXL | 194-200 | 124-132 |
| Note that these sizes relate to the body size of the wearer and not actual garment dimension | ||
Description
With all the adjustability features, KARAM PN41 is a specialized harness for fall arrest and work positioning at height in industries like chemicals and fertilizers.
| Ref. | Width of Back Pad | Attachment Elements | Convenience | Weight | Size | Certified to |
| PN41 (01) | 21.0cm | Two lateral D-rings for work positioning | Tool holding webbing loops and rings for tool holders, bolt bags, etc. | 680gms | Medium, Large, Extra Large | EN 358:2018 |
| PN41 (02) | 14.5cm | 640gms | ||||
| PN41 (03) | 14.5cm | Rings for tool holders, bolt bags, etc. | 520gms |
| Ref. | Width of Back Pad | Attachment Elements | Convenience | Weight | Size | Certified to |
| PN45 (01) | 21.0cm | Two lateral D-rings for work positioning | Tool holding webbing loops and rings for tool holders, bolt bags, etc. | 680gms | Medium, Large, Extra Large | EN 358:2018 |
| PN45 (02) | 14.5cm | 640gms | ||||
| PN45 (03) | 14.5cm | Rings for tool holders, bolt bags, etc. | 520gms |
| Ref. | Width of Back Pad | Attachment Elements | Convenience | Weight | Size | Certified to |
| PN44 (01) | 21.0cm | Two lateral D-rings for work positioning | Tool holding webbing loops and rings for tool holders, bolt bags, etc. | 680gms | Medium, Large, Extra Large | EN 358:2018 |
| PN44 (02) | 14.5cm | 640gms | ||||
| PN44 (03) | 14.5cm | Rings for tool holders, bolt bags, etc. | 520gms |
| Ref. | Width of Back Pad | Attachment Elements | Convenience | Weight | Size | Certified to |
| PN43 (01) | 21.0cm | Two lateral D-rings for work positioning | Tool holding webbing loops and rings for tool holders, bolt bags, etc. | 680gms | Medium, Large, Extra Large | EN 358:2018 |
| PN43 (02) | 14.5cm | 640gms | ||||
| PN43 (03) | 14.5cm | Rings for tool holders, bolt bags, etc. | 520gms |
Adjustable waist and thigh straps with 2 lateral D-ring for work positioning.
| Ref. | Width of Back Pad | Attachment Elements | Convenience | Weight | Size | Certified to |
| PN31 (01) | 21.0cm | Two lateral D-rings for work positioning | Tool holding webbing loops and rings for tool holders, bolt bags, etc. | 680gms | Medium, Large, Extra Large | EN 358:2018 |
| PN31 (02) | 14.5cm | 640gms | ||||
| PN31 (03) | 14.5cm | Rings for tool holders, bolt bags, etc. | 520gms |
Has 2 chest attachment textile loops, adjustable waist and thigh straps with 2 lateral D-ring for work positioning.
| Ref. | Width of Back Pad | Attachment Elements | Convenience | Weight | Size | Certified to |
| PN32 (01) | 21.0cm | Two lateral D-rings for work positioning | Tool holding webbing loops and rings for tool holders, bolt bags, etc. | 680gms | Medium, Large, Extra Large | EN 358:2018 |
| PN32 (02) | 14.5cm | 640gms | ||||
| PN32 (03) | 14.5cm | Rings for tool holders, bolt bags, etc. | 520gms |
| Anchorage Line | Ref. | Length |
| Twisted Rope Anchorage Line (14mm) | Anchor PN910 | 10m |
| Anchor PN920 | 20m | |
| Anchor PN930 | 30m | |
| Anchor PN940 | 40m | |
| Anchor PN950 | 50m | |
| Anchor PN9100 | 100m | |
| Anchor PN9150 | 150m | |
| Anchor PN9200 | 200m |
| Anchorage Line | Ref. | Length |
| Kernmantle Rope Anchorage Line (11mm) | Anchor PN910 (KRKD11) | 10m |
| Anchor PN920 (KRKD11) | 20m | |
| Anchor PN930 (KRKD11) | 30m | |
| Anchor PN940 (KRKD11) | 40m | |
| Anchor PN950 (KRKD11) | 50m |
| Anchorage Line | Ref. | Length |
| Kernmantle Rope Anchorage Line with Energy Absorber (12mm) | Anchor PN910 (KRAL12)(S) | 10m |
| Anchor PN920 (KRAL12)(S) | 20m | |
| Anchor PN930 (KRAL12)(S) | 30m | |
| Anchor PN940 (KRAL12)(S) | 40m | |
| Anchor PN950 (KRAL12)(S) | 50m |
KARAM (KARAM)
D 95, District Gautam Budh Nagar, Near Savoy Suites, Sector 2, Noida-201301, Uttar Pradesh, India, Greater Noida
Share us via
