P2 Power Solutions Pvt. Ltd. Noida, Uttar Pradesh

Typical Challenges Presence of high harmonic distortion, iTDD exceeding standard limit specified by IEEE Recurrent failure of expensive electronic cards, frequent failure of AC capacitor banks and malfunctioning of control circuits Production down-time due to halt in operation of continuous machines Inflated monthly electricity bills due to low power factor (true)   Root Cause Analysis High level of harmonic distortion is the main reason of expensive cards failure 7Bar Air Compressor, 40Bar Air Compressor, Refrigeration Panel, Juice Line identified as major non-linear loads - can be driven by AC or DC drives High harmonics resulting in low true power factor   Solution P2 Power Active Harmonic Filter at major nonlinear loads (p2p-415-af3) P2 Power Hybrid Filter (p2p-415-hf3) - best suited when power factor is low   Benefits Total current harmonic distortion maintained within limits specified as per IEEE standard (iTDD <8%) Significant savings (both tangible and intangible) through elimination of failures Improved supply voltage by reduced harmonic distortion True power factor maintained close to unity Significant savings through reduction in monthly electricity bills Unbroken operation of continuous process machines

Features Fast 32 bit digital signal processor Multi-Level converter architecture Direct Connection to 575V and 690V loads Synchronous Rotating Frame Principal for best performance Ultra fast compensation Proven performance on welding Harmonic Attenuation of >98% High Efficiency of >98% Selective Harmonic compensation Leading/Lagging Reactive Power Compensation Negative Sequence Compensation (load balancing) 15 possible Priority Selection settings for maximum flexibility Smart auto foldback to avoid over loading of filter 7" touch screen display Ethernet based remote monitoring MODBUS RTU, USB, SD Card Internal CAN Communication Closed Loop & Open Loop operation Paralleling of upto 32 filters for higher capacity Operator Activity Log >2, 00, 000 time stamped events can be logged in internal NAND memory   Benefits Compliance with prescribed harmonic limits - No penalty Unity Power Factor - higher savings Reduced energy (kVAh) charges - higher savings Reduced peak demand charges - higher savings Reduced fuel consumption in generators - higher savings Ultra fast compensation - effective with fast fluctuating load Optimum capacity utilization of electrical infrastructure Optimum capacity utilization of backup generators Improved voltage profile Reduced risk of transformer failure - higher uptime Reduced risk of equipment failure - higher uptime Increased operational reliability - higher uptime Compact footprint Indigenous design, low maintenance and prompt service

Typical Challenges Hunting of Diesel Generator even at partial loading condition Heating of DG alternator Low power factor leading to increased reactive stress   Root Cause Analysis Complex load profile of heavy construction machines such as crane and welding demanding high reactive power which DG sets are not designed to supply Increased reactive stress on DG due to sudden spikes/jerks in reactive power Inflated peak kVA demand due to transitory reactive jerks   Solution P2 Power Hybrid Filter at DG incomer (p2p-415-hf3) P2 Power Hybrid Filter at DG incomer (p2p-415-hf4) - in case neutral current is high   Benefits Reduced reactive stress on generator and therefore reduced peak demand Elimination of DG hunting and alternator heating Reduced fluctuations in peak power demand on the generator Prevention of de-rating of available capacity; generator can be loaded to its maximum capacity Lower capacity generators can be used to support entire load thus resulting in significant savings in capital expenditure on over sized DG sets Reduced current harmonic distortion Same active/hybrid filter installation can be used to improve power factor on grid supply as well

Typical Challenges Flickering and failure of lighting fixtures Interrupted operation of lifts/elevators Overloading and burning of neutral conductor   Root Cause Analysis High harmonic distortion generated by large chiller units, lifts/elevators and lighting loads Fluctuating load profile and sudden reactive jerks of lifts/elevators Summation of triple-N harmonics in neutral conductor leading to high neutral current   Solution P2 Power Active Harmonic Filter at major non-linear loads (p2p-415-af3) P2 Power Active Harmonic Filter with Neutral Compensator (p2p-415-af4) - when neutral current is high P2 Power Hybrid Filter (p2p-415-hf3) - suitable when power factor is low   Benefits Total harmonic distortion maintained within limits specified as per IEEE standard (iTDD <8%, vTHD <5%) - free from any risk of harmonic penalty (if applicable) High true power factor; free from any risk of low pf penalty (if applicable) Significant savings through elimination of lighting failures and reduced losses Uninterrupted operation of lifts/elevators Reduced neutral current and overloading of neutral conductor

• MOQ 50 NOS.
• TypeBattery Chargers
• ApplicationCharging
• Weight10-20kg
• Voltage220V
• ConditionNew
• Power6-9kw, 9-12kw, 22kW
• Warranty1year
• DrivenElectric
• Country of OriginIndia
• Brand NameP2 Power
• CertificationARAI certified
• Input Voltage230V

Features Fast 32 bit digital signal processor Latest 3-Level NPC2 converter architecture Advanced RCT snubber with Active Damping Synchronous Rotating Frame Principal for best performance Ultra fast compensation Proven performance on welding Harmonic Attenuation of >98% High Efficiency of >98% Selective Harmonic compensation Leading/Lagging Reactive Power Compensation Negative Sequence Compensation (load balancing) 15 possible Priority Selection settings for maximum flexibility Smart auto foldback to avoid over loading of filter 7" touch screen display Ethernet based remote monitoring MODBUS RTU, USB, SD Card Internal CAN Communication Closed Loop & Open Loop operation Paralleling of upto 32 filters for higher capacity Operator Activity Log >2, 00, 000 time stamped events can be logged in internal NAND memory   Benefits Compliance with prescribed harmonic limits - No penalty Unity Power Factor - higher savings Reduced energy (kVAh) charges - higher savings Reduced peak demand charges - higher savings Reduced fuel consumption in generators - higher savings Ultra fast compensation - effective with fast fluctuating load Proven performance on welding Optimum capacity utilization of electrical infrastructure Optimum capacity utilization of backup generators Improved voltage profile Reduced risk of transformer failure - higher uptime Reduced risk of equipment failure - higher uptime Increased operational reliability - higher uptime Compact footprint Indigenous design, low maintenance and prompt service