Other Products / Services #325127

We are offering uv varnish. (polyester resins and monomers (generally acrylates as dilution agents), photoinitiators, and various additives is formulated to derrived this uv curable varnish . Uv a electromagnetic radiation, approximately 300-450 nanometers in wavelength is require for drying , this special uv cure varnish series uv-printing inks based on hybrid-polymerization for flexo- and indirect rotogravure printing of furniture edge bandings and profiles made of abs, pvc, ppusp:increased productivityrapid drying time with minimal heatreduced floor space requirementslower energy costs (up to 75 percent)reduced solvent content and voc emissionsone-part formulationsindefinite pot lifeoptimal processing conditions of uv coatings can achieve excellent product quality and cosmetic appearance. End-use performance, attributes demonstrate robust adhesion (astm tape test), abrasion-mar resistance/durability (taber and rca test methods) andchemical resistance. Custom formulations can be developed toachieve unique physical requirements as well. application process valid: (1) narrow web application flexo, through anilox(2) rotogravure coating cylinder, engraved pattern

We are offering heat seal adhesive for shrink grade pet and pvc. (a) this adhesive is homogeneous and film/film and film/foil, film to metal, film to glass laminating adhesive(b) this specialties adhesive applications, particularly for bonding coated mylar polyester film and other nonporous plastic films and foil. This is a heat-seal adhesive for laminating biaxial oriented polystyrene film to aluminum foil, pet to pet. this is ready to use adhesive and single pack adhesive for heat seal purpose,

We are offering hot melt adhesive. hot melt adhesives are solid materials which become sufficiently fluid at elevated temperature to be applied to bonding surfaces & solidify immediately afterwards. Neither bonding surface has to be porous because no solvent evaporation is involved the application speed & fast set are important advantages of hot melts. edge band 786 granules bead form, provides low viscosity multipurpose, hot melt adhesive it is finest, highest quality hot melt. Its high viscosity, high heat resistance and excellent bonding characteristics make this the ideal all-purpose straight line edge banding adhesive. Recommended applications include: veneer, (thick and thin), polyester, pvc, thick pvc, melamine, solid wood, abs, and laminates. a typical hot melt formulation contains 50% polyvinyl acetate (low viscosity) resin as the primary adhesives component. 23 35% co resin or extender resin to increase fluidity at the application temperature & reduce cost, & 25-35%plasticsizer(s) to increase flexibility & adhesion & reduce cost. edge band 786 resins is particularly recommended for hot melts adhesive the pot life of a hot melt at 162 c generally does not exceed eight hours. edge band 786 can be supplied in bead, granules form and also in liquid formsolbility of edge bond 786edge bond 786 beads are insoluble in anhydrous lower alcohols other than methanol. They will dissolve in these alcohols containing 5 10% water. solution of edge bond 786 grade resins can be prepared at room temperature by slowly adding the temperature by slowly adding the beads to the solvent while maintaining good agitation if heat isapplied the solution rate is increased. Diluents which are non solvent alone can be used inconjunction with active solvents to modified the viscosity evaporation rate or cost of a solvent system

We offer Polypropylene Wooven Sacks Ink.Febaplast is pp wooven sack flexo printing inks available in 25 liter packing. for more details technical data or msds please write us

we are offering polyester resin. (sebs) linear copolymer, our polyester resin is a clear, linear triblock copolymer based on styrene and ethylenebutylene with a polystyrene content . these polyester resin is used as hotmelt adhesive, sealant and coatings

We are offering resin for adhesive, sealants and coatings. kraton g1726 m is a clear, linear triblock copolymer based on styrene and ethylenebutylene with a polystyrene content of 30%. It is supplied from north america in the physical form granuels. kraton g1726 m is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

We are offering primer. description pur-s2230 / lqi is a film forming, and a non-reactive thermoplasticpolyurethane with a polyether based aliphatic urethane chemistry. the dry film of the primer is very soft, flexible and has a high elongation. the film has good elastomeric properties and has moderate tensile properties. the primer is designed for pvc edge banding, which acts like a bonding agent between the adhesive and the substrate. this primer has very high tolerance to aliphatic alcohol solvents and esters. It exhibits well adhesion to a variety of plastic films used in flexible packaging industry including pvc. pur-s2230 / lqi has low blocking resistance and heat resistance and has tack. this primer has very good solvent release properties and resolubility. It can be cross linked with poly isocyanate cross linkers for 2-k coatings. characteristics slow drying odorless filmgood film formernon- yellowinggood pigment wet ability & dispersionlow blocking resistancelow heat resistancecompatible to nc/ vinylshigh alcohol solubility specifications colour colorless to light yellow liquidsolids 29 31 % viscosity 400- 900 mpa.s (25 deg c)specific gravity 0.82 0.85 solvent content* ethyl acetate 80-90 %isopropanol 10-20 %

we are offering micronized polar modified polyethylene wax. additive to improve rub resistance of printing inks.modifier for the surface properties of lacquers, coating and inksfor water based and solvent based printing inks.