Other Products / Services #4486248

Description: Plastic restoring polish for plastic car parts. Through its innovative formula made up with top waxes and state-of-the art polymers, this specific polish cleans, shines and restores plastic parts such as dashboards, front and rear bumpers, etc., leaving a semi-glossy and antistatic protective film. It leaves a fresh and pleasant scent. How to use: Please spray a small quantity of product on a sponge or cloth and spread it with circular movements. If a higher gloss level is desired, please repeat the application twice, increasing the quantity. Eventually, remove it with a clean cloth.

Description: Matt plastic restoring polish for plastic car parts. Through its innovative formula made up with state-ofthe- art polymers, this specific polish cleans and restores plastic parts such as dashboards, front and rear bumpers, etc., leaving a matt and antistatic protective film. It leaves a fresh and pleasant scent.How to use: Please spray a small quantity of product on a sponge or a cloth and spread it with circular movements. Eventually, remove it with a clean cloth.

Description: Specific cleaner for plastic car parts that degreases and dissolves stubborn stains and grime very fast and well. Through its active components, it guarantees an excellent sanitizing action, thus making it a perfect product also for public transport. It is also suitable for rubber, PVC and leatherette and leaves a fresh and pleasant scent.How to use: HOW TO USE PAI PLAST 0.5: Please spray a little quantity on a sponge or cloth and apply on the area to treat. Let it act for a while, then remove it with a cloth.HOW TO USE PAI PLAST PRO: The product can be diluted in water at a percentage of 25-30%, according to the level of dirt to remove. Please spray it on a sponge or cloth and apply on the area to treat. Let it act for a while, then remove it with a dry cloth.

Description: Specific cleaner for car glasses, it cleans deeply without leaving spots and halos. It removes also stubborn grime such as exhaust gas deposits, pollutants, organic sediments, dust and dropping, leaving a thin antistatic film, which prevent dust deposition.How to use: Please spray the product on car glasses at a short distance (20 cm) and remove dirt with a microfiber cloth or paper. Rinsing is not necessary. Dilute the product with water (up to 50%), in order to slow down evaporation during the warmer months.

Description: Specific cleaner for alloy wheels. It dissolves and removes with no effort also the toughest dirt. Its formula, based on detaching agents, has a deep action, which allows dirt suspension, thus making its removal easier, just using simple water. Blitz-Out leaves a transparent and antistatic film, which protects alloy from dirt and dust deposition. Although problems did not emerge, considering the wide range of aluminum alloy, it is always recommended to test on an inconspicuous area prior to general use. How to use: HOW TO USE BLITZ-OUT 0.5: Please do not use on hot alloy wheels. Spray the product on the area to treat and let it act for a while, without letting it dry. If necessary, please rub with a brush; finally, rinse with high-pressure water.HOW TO USE BLITZ-OUT PRO: Please do not use on hot alloy wheels. The product can be diluted from 10 to 30% with water. Do not use on hot alloy wheels. Spray the product on the area to treat and let it act for a while, without letting it dry. If necessary, please rub with a brush; finally, rinse with high-pressure water.

Description: Concentrated cleaner for car body polishing. Through a perfect balance between cleaning and glossing agents, it washes and shines cars in one single action. It quickly and easily removes dirt and exhaust gas deposit, insects, dropping, dust and contaminants. Lasting Brill does not generate a lot of foam and thanks to the total absence of solvents, phosphates and colorants, it is absolutely biocompatible and leaves an antistatic waterproof film, which prevent filth deposition.How to use: This self-drying product can be diluted from 2 to 4% with water. Please apply with a sponge, insisting where dirt is tougher, and wash away with clean water.

Description: This is a concentrated specific non-acid cleaner that removes superficial rust and iron residues. Its specific formula attacks the metal oxide, dissolving and taking rust away. It is a perfect product for railroad rust and chimney metal particulate removal. Unlike acid products, its revolutionary composition with neutral pH allows a simpler and safer usage, as it does not damage plastic and rubber car parts.How to use: This neutral pH product has a very marked odour; it is recommended to use it in the open air or in a well-ventilated area. Before application, please clean the application area. Then spray Rust Fall-X directly on the surface to treat, letting it act for few seconds. Red-brown flowing down will appear, indicating that the dissolving process has begun. Finally, rinse with a high-pressure water jet.

Description: This is a polishing cleaner, specially created for yacht and boat washing. It easily removes stains caused by natural elements and exhaust gas, insects, grease and droppings. Unlike many other boat cleaners in the market, NAUTICLEAN is a no-acid formula, which is not aggressive for the gelcoat and does not affect waxed hulls. Rather, through its innovative components it is able to shine the surface and to leave a lasting protection and an antistatic waterproof film, which prevent filth deposition. It generates a minimum quantity of foam and it may be used even with seawater (rinse with clean water). Thanks to the total absence of solvents, phosphates and colorants, it is absolutely biocompatible.How to use: This self-drying product can be diluted from 2 to 4% in water. Please apply with a sponge, insisting where dirt is tougher, and wash away with clean water.

Description: This is a super concentrated cleaner ideal for professional yacht and boats washing. Through its innovative components, it removes with no effort stubborn grime and persistent dirt very fast and well, thus being perfect for beginning or end-of-the-season maintenance works. It quickly dissolves stains caused by natural elements and exhaust gas, insects, grease and droppings. It has also a good glossy action, leaving clean and shiny hulls and metal parts as well. Thanks to the total absence of solvents, phosphates and colorants, it is absolutely biocompatible. How to use: This self-drying product can be diluted from 2 to 4% in water. Please apply with a sponge, insisting where dirt is tougher, and wash away with clean water.

Description: Specific detergent for inflatable boats, fenders and other rubber details cleaning. It is the ideal solution to quickly and effectively eliminate also stubborn and ingrained grime. Its balanced formulation allows to remove stains caused by weathering, suntan cream, exhaust residues, oil, grease, insects and droppings, without damaging seams and adjacent parts. Thanks to its active and renewing components, RIBY-CLEAN restores the original surface condition and leaves a protective film, which forestalls filth deposition, and contrasts UV rays, preventing yellowing. Extremely simple to rinse out, its plant origin agents make it an absolutely biocompatible product. How to use: RIBY-CLEAN 0.5: please spray the product on the area to treat and let it act for a while; then, remove it with a sponge and rinse out with clean water.RIBY-CLEAN PRO: please dilute it from 10 to 15% in water, depending on the level of dirt to remove. Please spray it on the area to treat and let it act for a while; then, remove it with a sponge and rinse out with clean water.

Description: grain: medium finecolour: greencutting power: medioeffect: well polished and defect less surfacedescription: abrasive polishing bar compound for platic materials, specificly formulater to remove light defects, dulls and scratches left from previous process. thanks to his micro abrasive formula, it leavs a clean, deep and scratch-less surface. it is normally used with large (trama) clothes wheels such as pan-mad.packaging: bars (briks of 800-1000 gr).

Description: grain: extra- finecolour: yellow (ocra)cutting power: extrimly loweffect: shining surfacedescription: shinig bar compound for platic materials, it leavs a clean, deep and glossy surface without greasy halos. it is normally used with extremly soft clothes wheels such as pan-felp.packaging: bars (briks of 800-1000 gr).

Description: grain: medium finecolour: greencutting power: medioeffect: well polished and defect less surfacedescription: abrasive polishing bar compound for platic materials, specificly formulater to remove light defects, dulls and scratches left from previous process. thanks to his micro abrasive formula, it leavs a clean, deep and scratch-less surface. it is normally used with large (trama) clothes wheels such as pan-mad.packaging: bars (briks of 800-1000 gr).

Description: grain: extra- finecolour: yellow (ocra)cutting power: extrimly loweffect: shining surfacedescription: shinig bar compound for platic materials, it leavs a clean, deep and glossy surface without greasy halos. it is normally used with extremly soft clothes wheels such as pan-felp.packaging: bars (briks of 800-1000 gr).

Description: This is a very cutting liquid compound used to remove marks, failings, dullness and P1200-P2000 sand scratches, according to the hardness of treated paints. It may be used both on oxidized surfaces and new well dried paints. It is generally applied by polisher with a foam pad (white). How to use: Mettere una piccola quantit di prodotto sul tampone, stendere con movimenti incrociati regolando la macchina su un basso numero di giri e aumentando via via (800-1500 RPM). Prestare attenzione a non surriscaldare larea trattata. Se necessario insistere pi volte fino a completa scomparsa delle imperfezioni. Rimuovere eventuali residui con un panno in microfibra. Per ottenere un grado di finitura superiore continuare il trattamento con una pasta pi fine.

Description: Cutting polishing compound with innovative components, used to remove marks, failing, dullness and P1500-P3000 sand scratches, according to the hardness of treated paints. It may be used both on oxidized surfaces and new well dried paints. It is quick and easy to use and need of a very small quantity, without waste of time and product. It is also used as One Step, since it leaves an extremely deep gloss level. It is generally applied by polisher with a medium-hard foam pad (orange). How to use: Please apply a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (800-1500 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the paint. Do not overstay on the surface without adding more product. If necessary, please repeat the application more times till the complete removal of scratches. Eventually, wipe the surface with a clean cloth.

Description: Cutting polishing compound used to remove marks, failing, dullness and P1500-P3000 sand scratches, according to the hardness of treated paints. It may be used both on oxidized surfaces and new well dried paints, leaving a deep and clear shine. It is generally applied by polisher with a medium-hard foam pad (orange). How to use: Please apply a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (800-1500 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the paint. If necessary, please repeat the application more times till the complete removal of scratches. Eventually, wipe the surface with a clean cloth.

Description: Nano-abrasives based finishing formula with high performance polishing agents. It easily removes light dullness, swirls, polishing marks, holograms and sand scratches up to P4000-P5000, assuring an amazing deep gloss finishing.It is generally applied by polisher with a medium-soft foam pad (light blue). How to use: Please apply a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (1000-2000 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the paint. If necessary, please repeat the application more times till the complete removal of scratches. Eventually, wipe the surface with a clean cloth.

Description: This is an extra-fine finishing polish; through its combination of micro-abrasives, it easily removes light dullness, swirls, polishing marks and holograms, leaving a deep and clear shine. It is generally applied by polisher with a medium-soft foam pad (light blue). How to use: Please apply a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (1000-2000 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the paint. If necessary, please repeat the application more times till the complete removal of scratches. Eventually, wipe the surface with a clean cloth.

Description: This is a renewer protective polish, which gives high gloss finishing while adding wax protection on gelcoat and composites surfaces. It safely removes light oxidation, stains and water spots, restoring the original deep shine of the surface; at the same time, it helps stop fading caused by UV rays, natural elements, salt water and chalk. Thanks to its advanced formula, made of last-generation polymers, EASY GLOSS adheres to the surface, thus leaving an enduring protective and water-repellent film, as well as an unbelievable slick finish and radiant shine. It is very fast to apply with a foam pad (by hand or polisher) and extremely easy to remove. Unlike many other polishing products on the market, it can be wax off effortlessly also after several hours.Also black.How to use: Please pour a small quantity of compound on a soft foam pad TT05 and spread it with crossed movements, by hand or by polisher (800-1500 RPM). Let the surface dry completely and eventually wipe it off with a clean cloth.

Description: Abrasive polish for the surface treatment of resins and composite materials used to remove minor scratches and small defects as well as swirl marks, which may come from previous coarse compounds. Through its combination of micro-abrasives and glossifiers, it has an excellent refinishing action on plugs and moulds. It removes light oxidation, yellowing, black and rusty streaks, tough water spots and pollution marks, restoring the original deep shine of thesurfaceHow to use: Please apply by variable speed polisher, selecting a medium-soft foam pad TT04. Pour a small quantityof compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (800-1500 RPM) whilespreading the paste with crossed movements. Work till you reach a very bright surface, always paying attention atnot overheating the surface. Eventually, wipe it off with a clean cloth.

Description: This is a nano-abrasives based refinishing polish able to permanently remove swirls, polishing marks resulting from previous coarse compounds and holograms, which are more visible on dark colours. TOPFINISH 2, recently powered by our R&D department, is the best solution for the extreme refinishing action even of the most delicate and difficult surfaces. Thanks to its balanced and effective blend of nano-abrasives and high performance polishing agents, it allows to achieve the highest standard of perfection and brightness in a safe, simple and quick way.Also black.How to use: Please apply by variable speed polisher, selecting a medium-soft foam pad TT04. Pour a small quantityof compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (1000-2000 RPM)while spreading the paste with crossed movements. Pay attention at not overheating the surface. If necessary, pleaserepeat the application more times. Eventually, wipe the surface with a clean cloth.

Description: Triple action microfiber: removes the toughest dirt, cleans deeply and has high absorbing properties.How to use: Indicated for glasses, headlights and rims. It is resistant, easy to use and to wash. 2 Pcs nylon bag with blister.

FLAT PLUS PASTE FOR METAL SMOOTHINGMS PASTE FOR METAL GRINDINGST285 PASTE FOR METAL GRINDINGPU PASTE FOR METAL POLISHINGLN205 PASTE FOR METAL SHININGCM PASTE FOR METAL SHINING

Description: Grana: ultra fineColor:e biancoPotere abrasivo: molto bassoEffetto: superficie molto brillanteDescrizione: brillantaturaConfezione: latta da 20KgCaratteristiche: ottima brillantatura per materiali naturali quali: corno, cocco, conchiglie, corozo, ecc., solitamente utilizzata con legnetti

Description: Grana: grossaColore: marrone chiaroPotere abrasivo: molto aggressivaEffetto: superficie opaca ed omogeneaDescrizione: pasta aggressiva in grado di lasciare una superficie regolareConfezione: latta da 20KgCaratteristiche: pasta aggressiva che attraverso la sua combinazione di abrasivi, in grado di rimuovere segni profondi e arrotondare i pezzi lasciando una superficie regolare ed omogenea, solitamente utilizzata con legnetti

Description: Micro-abrasive polish that combines the possibility of removing light scratches with shining and protective properties. It may be used both by polisher with a soft black pad and by hand. How to use: Please apply a small quantity of compound on the polisher-pad and spread the polish with crossed movements. Let the surface dry completely and eventually wipe it off with a clean cloth.

Description: Gloss restorer that provides good protection and high-gloss finishing action. It easily and quickly allows to restore and maintain the original deep shine of paint. This polish is usually applied by hand with a soft cotton cloth and removed with a cloth. How to use: Please pour a small quantity of product on a cloth and spread with circular movements. Let it act and dry, then remove it with a clean cloth.

Description: This is an anti-haze polish spray with excellent cleaning properties. It allows to clean and polish in only one step, assuring a long-lasting protection. It may be used on paints, plastics, rubber and glasses (but not on the windscreen), leaving an unbelievable shine for a long time. How to use: Please spray a small quantity of product on a cloth or sponge and spread with circular movements on a 5050 cm area. Remove it immediately with a clean cloth, without letting it dry.

Description: Matting compound that has been specially created for painted surface preparation before blending. Through its innovative abrasive formula, characterized by progressive rounding-down technology, it matts paint, leaving a very homogenous and flat surface, with the best and fastest result. By spraying the surface with water during the application, an even more regular surface might be achieved. I-MATT contains special cleaning agents activated by water, thus being very easy to re-polish up with no remains. How to use: Please pour a small quantity on a wet soft cotton cloth, paper or abrasive sponge and spread it with circular movements. If a more homogenous and flat surface is required, spray a small quantity of water during the application and work till the desired matt level is achieved. Eventually, wipe it off with a clean wet cloth.

Description: Specific cleaner generally used for the decontamination process of surfaces. It is usually applied together with clay bar, scrub disc, microfiber cloth and glove for decontamination of our Silky Line. Very easy to use, it limits waste of time in the working processes and guarantees a very good level of cleaning. This product lets decontamination accessories slide very easily, it dries very quickly and it leaves no haze. It causes no problems for the application of the following polishing products. This water-based cleaner is not dangerous to the users health and to the environment.HOW TO USE: please spray the product on the area of application, then use the selected decontaminant among thoselisted above. Eventually, dry with a clean cloth.

Description: This is a concentrated cleaner for bilge and engine compartments, used to safely dissolve grime, sludge, fuel residues, grease and oil in the most effective way. It neutralises unpleasant odours and has a high sanitising action. Its formula, based on detaching agents, acts deeply, allowing dirt suspension, thus making it extremely easy to remove. It can be used even with seawater, it does not harm plastic and metal parts. Its scent is fresh and pleasant. How to use: Please dilute it from 3 to 8% in water, depending on the level of dirt to remove. Pour it in the bilge and let it act for a while, then drain it. It is also possible to leave the product in the bilge while running the boat, before pumping it out, always in accordance with local regulations.

BP127 PASTE FOR PLAST SHININGPO5 PASTE FOR PLASTIC AND NATURAL MATERIAL GRINDINGLP200MA PASTE FOR PLASTIC SMOOTHINGK1 PASTE FOR PLAST POLISHINGKA PASTE FOR PLAST SHININGK5 PASTE FOR PLAST SHININGF PASTE FOR PLAST SHININGC4 PASTE FOR PLAST SHINING