These double flanged cast steel crane wheels are suitable for all types of power driven cranes. They are designed with treads and flanges of the proper contour to operate on the runway rails with a minimum of friction and wear. The treads may be finished straight, tapered or crowned. Flanges are heavy and may be finished for lighter rails than the maximum sizes listed. Wheels may be adapted to any style of mounting and fitted with any type of bearing.

Wheels will be furnished either "Rough Cast" or "Finished", as ordered.

	1.Rough CastWheels are supplied with sufficient excess material to finish to the dimensions listed in the table below.
	2.FinishedWheels are supplied machined to the purchasers' specifications. Rail size should be specified, otherwise wheels will be finished with straight treads for the maximum size rail, as listed in table below.Note: The cored hole diameter "DI" in the table below may be varied to suit and either core diameter or finished bore dimensions must be specified.We have a number of wheel patterns, which are not listed, and solicit your inquiries for crane wheels of any style or size.

The Winch Machines are Power Driven and are fabricatedaccording to IS-9507-1979 standardization, which is suitable for sizable and heavy-dutyutilizations. Manual Winches can be fabricated with auxiliary utilities as well, according to our clients needs.

A pulley is a wheel on an axle that is designed in order to support movement. It is also used to change directions of a cable and the belt along its circumference. A pulley system can be operated using a rope, chain, belt, or sometimes even a cable. Each variety is used to lift particular types of weights based on the power transmitted and the force required for the work. Chains, ropes, etc. are called the drive element of a pulley. Bhagirath Heavy Transmission India provides you with the premium quality chain hoist pulleys. These pulleys find extensive usage in the factories for lifting different sorts of weights. They also find applications in coal and other mineral mines, farmsand construction sites. We construct chain pulley blocks from high grade materials. Also, we make sure that our machines are easy to operate. Features of our chain pulley are as follows:

• Chain blocks are manufactured as per the order specifications.
• Load chain may vary from a range of 1 to 16 as per the capacity.
• Our Chain blocks show a capacity of 500 kg to 30 tons.

Some features of our Chain pulleys are listed below.

• Easiest braking. Braking systems also are very reliable in operation.
• Hand chain and load chain that have been used are as per the IS 2429 / part II / 70.
• Rigidly built frame. Steel plates constructions are welded ensuring high-end safety.
• Forged hooks are as per IS 8610. They are made from forged steel and can move and rotate freely.
• Worm wheel is made of high grade cast iron. Worm shafts are made from high quality steel and are heat treated properly.

Chain pulleys find applications in various industries for lifting materials. Good quality of raw material usage is important to ensure safety. Also, this ensures a long life of the equipment. Look for the best ones that is apt for your needs. Different range of capacity and number of falls are available. Velocity variations are also available in the products. The models remain the same while one can choose based on the capacity expected. Match up your needs and well do our best to deliver them.

These are available in following specifications:

Capacity ranging from 500Kg to 30 tons

Chain block as per order and specification

Load chain falls may vary from 1 - 16 as per the capacity

Guarantee for the repairs

EOT cranesm as they are popularly known as, are electric overhead traveling cranes. An overhead crane is commonly referred to as a bridge crane. These cranes are commonly found in industrial setups. These consist of parallel runways with a traveling bridge spanning the gap. The lifting component of the crane travels along the bridge.

At Bhagirath Heavy TransmissionIndia, we manufacture EOT overhead cranes which are fabricated using optimum quality raw materials. Also, components such as M.S. angles, M.S Sheets, I beam, brakes and motors are also manufactured with good quality materials. Our machines are designed to carry a load ranging up to a limit of 100 tons. These find extensive usage in foundry, engineering and also machinery shops. As per specifications from our clients, we provide customized order delivery.

EOT cranes are of two types :

• Single girder E.O.T cranes
• Double Girder E.O.T cranes.

We also provide a few unique features in our cranes. They are of high durability and performance. They are sturdy and easy to maintain. Our cranes are additionally corrosion resistant.

Maintenance Our cranes are easy to maintain that are extended completely or partially along the girder. We use the finest quality raw material in manufacturing different components and the system. We tailor our cranes as per the client needs.Some unique attributes of our E.O.T cranes are

• Customized designs that can match up with the budget of our customers.
• Economical designs thatare provided by manual long and cross travel facility. It also has a provision for using either electrical hoist or a motorized chain pulley block.
• Low headroomthatis aimed at reducing the cost of shed or building.
• These are ideal powerhouse cranes which are used for maintenance.
• Prices are highly competitive

We are well-established manufacturers and exporters of both single and double girder cranes.

Double girders :Double girders serve the purpose of lifting weights up to 10 tons and extend to a span of about 30 m. They consist of 2 torsion-free box girders. Theyare Some of the unique features of Overhead EOT Cranes include:

High performance

Durable

Sturdy

Easy maintenance

Corrosion resistance

All industrial areas require machinery and products which can be used for tasks like heavy weight lifting. Cranes, end carriages, crab hoists, etc. are required at sites of industrial functions, construction and other product factories. It is mandatory that all the machinery that is used should adhere to all safety standards. And thus, since safety is a requirement, the items should be ordered from reputed companies since to maintain their goodwill, they ensure that the products they offer are of excellent quality.

End carriages are machines that have extreme use in areas of construction. This is because they are of utmost help to transfer heavy materials from one place to another. An ideal end carriage machine should essentially have the further mentioned features and qualities. The most important feature is that the crane should have a good amount of capacity to carry heavy materials. The basic function of the carriage depends upon the crane capacity. Next is that the carriage should have a decent span. This is to accommodate materials comfortably into the carriage. It helps easy and speedy movement of materials. The end carriages have a variety in the type of cranes; that is they have single girder or double girder and I- beam or box type. Another important design feature should be the wheel load. And most importantly, the carriage should have long travel speed, the speedy transport depends on this design feature.

All these features are designed well into the end carriages produced by Bhagirath Heavy Transmission India. We have a good reputation for providing good quality machinery since the time it has been established. The design followed by the company while making the product includes the further mentioned features. It has a wheel centre of minimum 1/5 of the crane span. The end carriages have shock absorbers or buffers which help in minimizing any impact stoppage. In the end carriage, one set of carriage wheels has one gear wheel and the other plain type of wheel. The gear drives are provided with the gear wheels. Also, another design feature is that the bridge and end carriage couple plates are installed according to bridge width and rail centre. Again, there is the proper arrangement of wheel replacement on site.

Along with all these features, it is ensured that the end carriage is safe enough to use. It is tested well for this purpose. The product is made from strong raw material and has extremely low chances of breaking down.

FOR DESIGN OF END CARRIGES BASIC PARAMETRES REQUIRED:

1. CRANE CAPACITY

2. SPAN

3. TYPE OF CRANE i.e. SINGLE/DOUBLE GIRDER, I BEAM/BOX TYPE.

4. WHEEL LOAD

5. LONG TRAVEL SPEED

BASIC DESIGN FOLLOWED FOR CRANE END CARRIAGES:

1. WHEEL CENTRE IS MIN. OF 1/5TH OF CRANE SPAN.

2. SHOCK ABSORBERS/BUFFERS ARE PROVIDED TO MINIMIZE ANY IMPACT STOPPAGE.

3. IN ONE SET OF END CARRIAGES WHEELS ARE OF ONE GEAR TYPE AND ONE PLAIN TYPE.

4. GEAR DRIVES ARE PROVIDED ON GEAR WHEELS

5. BRIDGE AND END CARRIAGE COUPLE PLATES ARE INSTALLED AS PER BRIDGE WIDTH AND RAIL CENTRE.

6. PROPER ARRANGEMENT OF WHEEL REPLACEMENT ON SITE.

Construction is similar to that of full gears except for a single piece of the toothed hub and flanged sleeves. They also contain internal teeth and a set of bolts, nuts, lock washers, lube plugs, oil grease retaining seals over the hubs and a gasket.

BHT India fosters and designs manual as well as electric crab winches according to IS-9507-1979 standards.These are the finest for substantial and sizableutilizations. Subsequently listed are specifications of our Winch Machine; both manual and electric :

• Frame -Produced with MS plates accurately and precisely grounded with chequered plate for adamant andsolidbedrock. It can also be produced with I.S.M.C. and C Sections with a chequered plate standas the area of operation and as the solid bedrock.
• Design The Winch Machines are Power Driven and are fabricatedaccording to IS-9507-1979 standardization, which is suitable for sizable and heavy-dutyutilizations. Manual Winches can be fabricated with auxiliary utilities as well, according to our clients needs.
• Gear boxes - Helical Reduction Gear box or Open Spur Gears andPinionsare utilizedin making reductions.
• Rope Drum - Steel manufactureddrum which has been properlyfabricated, with the provision of flanges at either of the ends.
• Winding Capacity Usually a 100 metre Wire Rope.However, Drums with greater capacity of winding can also be manufactured in accordance with our client.
• Motor Immense Initial Torque, Class 'B' Covering, 150 Starts/ Hr415V, 50Hz Frequency, 3 Phase, A.C. Induction, Squirrel Cagingaccording to the standardization IS-325.
• Control and Control Panel - The winch is managed by a push button controller or station at 110Volts which isfastened on machine. The control apparatus such as thetriple Pole Reversing Contractors, H.R.C. Fuses and pilot lampsare of regarded make such as; ABB/BCH/SIEMENS.
• Brake Electromagnetic, Elector Hydraulic thruster, Double Shoe Type Brake or Hand Operated brakes arefabricated according to our clients needs.

Each of our machines have been certified and tested at an overload of up to 25 per cent. Our company provides a warranty of 12 months, from the delivery date, in case of any deformity in manufacturing at the factory. We retain the right of implementing any technical development without prior consideration.

Our variety of top-classhoisting and solutions for managing materials has made sure that high quality assistanceis delivered from our side. Each and every product is fabricated such that it has low load on wheel, light weight and low amount of fracture. Our superior range of products has provided aid in various operations and labour effectiveness across diverse industries and companies.

Electromagnetic motors are required in such areas of production. They are mainly used for converting electrical energy into mechanical energy. Electromagnetic motors are widely used in many appliances. From industrial pumps, fans to household appliances, they are used in blowers, power tools, etc. Some electromagnetic motors, which are small, are also used in items like watches. They are also used in shipping purposes, pumped storing devices, and other similar devices. Electromagnetic motors are powered by DC currents or AC currents. Thus, electromagnetic motors are used in a wide range of appliances.

Frame - Produced with MS plates accurately and precisely grounded with chequered plate for adamant andsolidbedrock. It can also be produced with I.S.M.C. and C Sections with a chequered plate standas the area of operation and as the solid bedrock.Design The Winch Machines are Power Driven and are fabricatedaccording to IS-9507-1979 standardization, which is suitable for sizable and heavy-dutyutilizations. Manual Winches can be fabricated with auxiliary utilities as well, according to our clients needs.Gear boxes - Helical Reduction Gear box or Open Spur Gears andPinionsare utilizedin making reductions.Rope Drum - Steel manufactureddrum which has been properlyfabricated, with the provision of flanges at either of the ends.Winding Capacity Usually a 100 metre Wire Rope.However, Drums with greater capacity of winding can also be manufactured in accordance with our client.

Our manual crab winches are designed and developed as per IS-9507-1979 and are best for heavy-duty applications. These winches with right hand operation and could be manufactured with other side operation also, as per customer requirement. Following are some of the essentials of our product:

These double flanged cast steel crane wheels are suitable for all types of power driven cranes. They are designed with treads and flanges of the proper contour to operate on the runway rails with a minimum of friction and wear. The treads may be finished straight, tapered or crowned. Flanges are heavy and may be finished for lighter rails than the maximum sizes listed. Wheels may be adapted to any style of mounting and fitted with any type of bearing.

Wheels will be furnished either "Rough Cast" or "Finished", as ordered.

	1.Rough CastWheels are supplied with sufficient excess material to finish to the dimensions listed in the table below.
	2.FinishedWheels are supplied machined to the purchasers' specifications. Rail size should be specified, otherwise wheels will be finished with straight treads for the maximum size rail, as listed in table below.Note: The cored hole diameter "DI" in the table below may be varied to suit and either core diameter or finished bore dimensions must be specified.We have a number of wheel patterns, which are not listed, and solicit your inquiries for crane wheels of any style or size.

The Winch Machines are Power Driven and are fabricatedaccording to IS-9507-1979 standardization, which is suitable for sizable and heavy-dutyutilizations. Manual Winches can be fabricated with auxiliary utilities as well, according to our clients needs.

A pulley is a wheel on an axle that is designed in order to support movement. It is also used to change directions of a cable and the belt along its circumference. A pulley system can be operated using a rope, chain, belt, or sometimes even a cable. Each variety is used to lift particular types of weights based on the power transmitted and the force required for the work. Chains, ropes, etc. are called the drive element of a pulley. Bhagirath Heavy Transmission India provides you with the premium quality chain hoist pulleys. These pulleys find extensive usage in the factories for lifting different sorts of weights. They also find applications in coal and other mineral mines, farmsand construction sites. We construct chain pulley blocks from high grade materials. Also, we make sure that our machines are easy to operate. Features of our chain pulley are as follows:

• Chain blocks are manufactured as per the order specifications.
• Load chain may vary from a range of 1 to 16 as per the capacity.
• Our Chain blocks show a capacity of 500 kg to 30 tons.

Some features of our Chain pulleys are listed below.

• Easiest braking. Braking systems also are very reliable in operation.
• Hand chain and load chain that have been used are as per the IS 2429 / part II / 70.
• Rigidly built frame. Steel plates constructions are welded ensuring high-end safety.
• Forged hooks are as per IS 8610. They are made from forged steel and can move and rotate freely.
• Worm wheel is made of high grade cast iron. Worm shafts are made from high quality steel and are heat treated properly.

Chain pulleys find applications in various industries for lifting materials. Good quality of raw material usage is important to ensure safety. Also, this ensures a long life of the equipment. Look for the best ones that is apt for your needs. Different range of capacity and number of falls are available. Velocity variations are also available in the products. The models remain the same while one can choose based on the capacity expected. Match up your needs and well do our best to deliver them.

These are available in following specifications:

Capacity ranging from 500Kg to 30 tons

Chain block as per order and specification

Load chain falls may vary from 1 - 16 as per the capacity

Guarantee for the repairs

EOT cranesm as they are popularly known as, are electric overhead traveling cranes. An overhead crane is commonly referred to as a bridge crane. These cranes are commonly found in industrial setups. These consist of parallel runways with a traveling bridge spanning the gap. The lifting component of the crane travels along the bridge.

At Bhagirath Heavy TransmissionIndia, we manufacture EOT overhead cranes which are fabricated using optimum quality raw materials. Also, components such as M.S. angles, M.S Sheets, I beam, brakes and motors are also manufactured with good quality materials. Our machines are designed to carry a load ranging up to a limit of 100 tons. These find extensive usage in foundry, engineering and also machinery shops. As per specifications from our clients, we provide customized order delivery.

EOT cranes are of two types :

• Single girder E.O.T cranes
• Double Girder E.O.T cranes.

We also provide a few unique features in our cranes. They are of high durability and performance. They are sturdy and easy to maintain. Our cranes are additionally corrosion resistant.

Maintenance Our cranes are easy to maintain that are extended completely or partially along the girder. We use the finest quality raw material in manufacturing different components and the system. We tailor our cranes as per the client needs.Some unique attributes of our E.O.T cranes are

• Customized designs that can match up with the budget of our customers.
• Economical designs thatare provided by manual long and cross travel facility. It also has a provision for using either electrical hoist or a motorized chain pulley block.
• Low headroomthatis aimed at reducing the cost of shed or building.
• These are ideal powerhouse cranes which are used for maintenance.
• Prices are highly competitive

We are well-established manufacturers and exporters of both single and double girder cranes.

Double girders :Double girders serve the purpose of lifting weights up to 10 tons and extend to a span of about 30 m. They consist of 2 torsion-free box girders. Theyare Some of the unique features of Overhead EOT Cranes include:

High performance

Durable

Sturdy

Easy maintenance

Corrosion resistance

All industrial areas require machinery and products which can be used for tasks like heavy weight lifting. Cranes, end carriages, crab hoists, etc. are required at sites of industrial functions, construction and other product factories. It is mandatory that all the machinery that is used should adhere to all safety standards. And thus, since safety is a requirement, the items should be ordered from reputed companies since to maintain their goodwill, they ensure that the products they offer are of excellent quality.

End carriages are machines that have extreme use in areas of construction. This is because they are of utmost help to transfer heavy materials from one place to another. An ideal end carriage machine should essentially have the further mentioned features and qualities. The most important feature is that the crane should have a good amount of capacity to carry heavy materials. The basic function of the carriage depends upon the crane capacity. Next is that the carriage should have a decent span. This is to accommodate materials comfortably into the carriage. It helps easy and speedy movement of materials. The end carriages have a variety in the type of cranes; that is they have single girder or double girder and I- beam or box type. Another important design feature should be the wheel load. And most importantly, the carriage should have long travel speed, the speedy transport depends on this design feature.

All these features are designed well into the end carriages produced by Bhagirath Heavy Transmission India. We have a good reputation for providing good quality machinery since the time it has been established. The design followed by the company while making the product includes the further mentioned features. It has a wheel centre of minimum 1/5 of the crane span. The end carriages have shock absorbers or buffers which help in minimizing any impact stoppage. In the end carriage, one set of carriage wheels has one gear wheel and the other plain type of wheel. The gear drives are provided with the gear wheels. Also, another design feature is that the bridge and end carriage couple plates are installed according to bridge width and rail centre. Again, there is the proper arrangement of wheel replacement on site.

Along with all these features, it is ensured that the end carriage is safe enough to use. It is tested well for this purpose. The product is made from strong raw material and has extremely low chances of breaking down.

FOR DESIGN OF END CARRIGES BASIC PARAMETRES REQUIRED:

1. CRANE CAPACITY

2. SPAN

3. TYPE OF CRANE i.e. SINGLE/DOUBLE GIRDER, I BEAM/BOX TYPE.

4. WHEEL LOAD

5. LONG TRAVEL SPEED

BASIC DESIGN FOLLOWED FOR CRANE END CARRIAGES:

1. WHEEL CENTRE IS MIN. OF 1/5TH OF CRANE SPAN.

2. SHOCK ABSORBERS/BUFFERS ARE PROVIDED TO MINIMIZE ANY IMPACT STOPPAGE.

3. IN ONE SET OF END CARRIAGES WHEELS ARE OF ONE GEAR TYPE AND ONE PLAIN TYPE.

4. GEAR DRIVES ARE PROVIDED ON GEAR WHEELS

5. BRIDGE AND END CARRIAGE COUPLE PLATES ARE INSTALLED AS PER BRIDGE WIDTH AND RAIL CENTRE.

6. PROPER ARRANGEMENT OF WHEEL REPLACEMENT ON SITE.

Construction is similar to that of full gears except for a single piece of the toothed hub and flanged sleeves. They also contain internal teeth and a set of bolts, nuts, lock washers, lube plugs, oil grease retaining seals over the hubs and a gasket.

BHT India fosters and designs manual as well as electric crab winches according to IS-9507-1979 standards.These are the finest for substantial and sizableutilizations. Subsequently listed are specifications of our Winch Machine; both manual and electric :

• Frame -Produced with MS plates accurately and precisely grounded with chequered plate for adamant andsolidbedrock. It can also be produced with I.S.M.C. and C Sections with a chequered plate standas the area of operation and as the solid bedrock.
• Design The Winch Machines are Power Driven and are fabricatedaccording to IS-9507-1979 standardization, which is suitable for sizable and heavy-dutyutilizations. Manual Winches can be fabricated with auxiliary utilities as well, according to our clients needs.
• Gear boxes - Helical Reduction Gear box or Open Spur Gears andPinionsare utilizedin making reductions.
• Rope Drum - Steel manufactureddrum which has been properlyfabricated, with the provision of flanges at either of the ends.
• Winding Capacity Usually a 100 metre Wire Rope.However, Drums with greater capacity of winding can also be manufactured in accordance with our client.
• Motor Immense Initial Torque, Class 'B' Covering, 150 Starts/ Hr415V, 50Hz Frequency, 3 Phase, A.C. Induction, Squirrel Cagingaccording to the standardization IS-325.
• Control and Control Panel - The winch is managed by a push button controller or station at 110Volts which isfastened on machine. The control apparatus such as thetriple Pole Reversing Contractors, H.R.C. Fuses and pilot lampsare of regarded make such as; ABB/BCH/SIEMENS.
• Brake Electromagnetic, Elector Hydraulic thruster, Double Shoe Type Brake or Hand Operated brakes arefabricated according to our clients needs.

Each of our machines have been certified and tested at an overload of up to 25 per cent. Our company provides a warranty of 12 months, from the delivery date, in case of any deformity in manufacturing at the factory. We retain the right of implementing any technical development without prior consideration.

Our variety of top-classhoisting and solutions for managing materials has made sure that high quality assistanceis delivered from our side. Each and every product is fabricated such that it has low load on wheel, light weight and low amount of fracture. Our superior range of products has provided aid in various operations and labour effectiveness across diverse industries and companies.

Electromagnetic motors are required in such areas of production. They are mainly used for converting electrical energy into mechanical energy. Electromagnetic motors are widely used in many appliances. From industrial pumps, fans to household appliances, they are used in blowers, power tools, etc. Some electromagnetic motors, which are small, are also used in items like watches. They are also used in shipping purposes, pumped storing devices, and other similar devices. Electromagnetic motors are powered by DC currents or AC currents. Thus, electromagnetic motors are used in a wide range of appliances.

Frame - Produced with MS plates accurately and precisely grounded with chequered plate for adamant andsolidbedrock. It can also be produced with I.S.M.C. and C Sections with a chequered plate standas the area of operation and as the solid bedrock.Design The Winch Machines are Power Driven and are fabricatedaccording to IS-9507-1979 standardization, which is suitable for sizable and heavy-dutyutilizations. Manual Winches can be fabricated with auxiliary utilities as well, according to our clients needs.Gear boxes - Helical Reduction Gear box or Open Spur Gears andPinionsare utilizedin making reductions.Rope Drum - Steel manufactureddrum which has been properlyfabricated, with the provision of flanges at either of the ends.Winding Capacity Usually a 100 metre Wire Rope.However, Drums with greater capacity of winding can also be manufactured in accordance with our client.

Our manual crab winches are designed and developed as per IS-9507-1979 and are best for heavy-duty applications. These winches with right hand operation and could be manufactured with other side operation also, as per customer requirement. Following are some of the essentials of our product: