Our Product / Services
Specifications
This air mattress is specially made for short term patient
It is simple in structure, easy in operation and is better in prevention and cure of bed sores
Its a perfect instrument of short term bed ridden patients and family bed for patients
Model No. | SMW - 4 | SMW - 8 | SMW - 4 | SMW - 8 |
Capacity To Hold | 4 Flask | 8 flask | 4 flask with top 4 bottle holders | 8 flask with top 8 bottle holders |
Capacity of Flask | 100 to 1000 ml | 100 to 1000 ml | 100 to 1000 ml | 100 to 1000 ml |
Speed Regulation | By Variable speed regulator knob | |||
Electric Supply | 220/230 volts, A/C Supply |
Automatic Timer Mechanical Imported | Can be provided at an extra cost |
Model No. | HRS-1 | HRS-2 | HRS-3 | HRS-4 | HRS-5 |
Platform Size in cm | 30 x 30 | 45 x 45 | 60 x 60 | 90 x 90 | 120x120 |
Flask Capacity in ml | 25 | 25 | 25 | 25 | 25 |
50 | 50 | 50 | 50 | 50 | |
100 | 100 | 100 | 100 | 100 | |
250 | 250 | 250 | 250 | 250 | |
500 | 500 | 500 | 500 | 500 | |
100 | 1000 | 1000 | 1000 | 1000 | |
Can Accomidation | 18 | 36 | 64 | 144 | 225 |
18 | 36 | 64 | 144 | 225 | |
16 | 25 | 49 | 121 | 200 | |
9 | 16 | 36 | 81 | 144 | |
- | 16 | 25 | 64 | 121 | |
- | 9 | 16 | 36 | 81 | |
Speed Range | 50 - 200 RPM | ||||
Speed Control | By variable speed regulator knob or by mechanical speed controller | ||||
Operations | Nearly silent operation with ultra-low vibration | ||||
Electric Supply | 220/230V AC, 50/60Hz |
Automatic Timer Mechanical Imported | Can be provided at an extra cost |
Digital RPM Meter with proximity sensor | Can be provided at an extra cost |
Spare platform with rubber discs | Can be provided at an extra cost |
Automatic restart at preset speed in case of power failure. | Can be provided at an extra cost |
Model No. | INS 1 | INS 2 | INS 3 |
Internal Dimensions (L X W X D) | 450x 175x 50mm | 450 x 350 x 50mm | 600 x 350 x 50mm |
Tubes Capacity | 25 | 50 | 100 |
Heating Load | 1.5 KW | 2.0 KW | 2.5 KW |
Temperature | Controlled by microprocessor based digital temperature indicator cum controller | ||
Temperature Range | From ambient to 70°C | ||
Temperature Accuracy | ± 1°C. |
MODEL NO: | PLT-201 |
Plate Form Size (In Inche) | 13" x 13" |
Plate Form Size (In mm) | 325 x 325 |
Can Accommodate | VDRL Plates, Small Flasks, Bottles & Beakers |
Speed Range in Regular Model | 70 to 210 RPM |
Speed Range in High Speed Model | 70 to 350 RPM (Approximate) |
Electric Supply | Single Phase 220 / 230 volts A.C. supply. |
Automatic Timer Mechanical Imported | Can be provided at an extra cost |
Digital RPM Meter with proximity sensor | Can be provided at an extra cost |
Spare platform with rubber discs | Can be provided at an extra cost |
Automatic restart at preset speed in case of power failure. | Can be provided at an extra cost |
Features
Ductile strength
Extremely strong
Perfect dimension
Specifications
N.W.: 6.4 Kgs
G.W.: 7.0 Kgs
Made of Aluminium tubes
Packing: 1pair 0.022 CBM
Specifications:
Frame work made of rectangular/Square M.S. Tube
2 Section top made of Welded wire mesh
Backrest Section Manoeuvred by screw Handle from foot end
Tabular Head & Foot Bows on unequal Height
Four locations for IV Rod
Overall Size: 206 L x 90 W x 60 H cms
Finish: Epoxy Powder Coated
Specifications
A-For one film
B-For two film
C-For three film
D-For four film
Specifications
Size: 48 L x 24 W x 24 H
Frame work made of Aluminum tubes
Pre-treated and Epoxy Powder Coated
Specifications
304/202 G- SS
Sizes: 8"x6", 9"x6", 10"x8", 11'x7" 12"x8", 12"x10", 15"x12", 18"x12"
Specifications
Size: 18"x9"x9"
M.S. Tubular legs fitted with. PVC stump
Pre-treated and Epoxy Powder Coated
M.S. top fixed with ruber matting and aluminium beedings
Also available in Stainless Steel Model
Features
Movable
High material strength
Rust resistant
Specifications
304/202 G- SS
Male / female
Specifications:
Low Weight, Strong structure, lovely design, good arts and crafts, easy antisepsis, small size, convenient to use
Utilizes high precision mechanically transmission
Can be used automatically folded through the left and right hand control handle
Made of high quality aluminium alloy tubes.
Dimension: A- high position: 1900 x 560 x 900 mm B- Low Position 1900 x 560 x 280 mm
Load weight: upto 120 kg
Product Weight: 40 Kg
Diameter of the castors: 125 mm
Applicable for various kind of hospital, emergency centrs, ambulances and battle fields
* Freely stackable: users can freely stack one
syringe pump onto another to provide
multiple solutions, which is very useful in
clinical treatment. It can stack eight pumps.
* Syringe pump has human voice alarm
function, which only available from us.
* The syringe pump can set three grades
occlusion: high, medium and low.
* HD LCD display, dynamically display
working status 5. Syringe pump will
automatically open up KVO once injection is
finished.
* The syringe pump wills compatible with
10ml, 20ml, 30ml, 50/60 ml syringe of any
brands.
* The syringe pump can preset solution
volume, which can greatly reduce the
workload of hospital.
* The syringe pump has three working
modes: simple rate mode, time volume
mode, dosage & weight mode
* The syringe pump can automatically record
the settings for last injection.
* Syringe pump has connecting port for
nurse-paging.
We are the leading supplier of High Temperature Deluxe Oven
Features
Sturdiness
Durability
High strength
Specifications
Basin (S.S) 304/202 G- SS
Sizes: 6", 8", 10", 12", 14" 16"
Features
Technologically advanced
Fine finish
Robust in construction
Description
5 Pronged base fited with 5 cm dia castors
12 mm S.S. Adjustable double hook I.V. Rod
To hold I.V. rod at one fixed height by knob
A-Plastic base with MS/SS pipe
B-S.S. Base with SS pipe
C-M.S. Base with MS pipe
Specifications
Approx. S.S. Bowl of 350 mm dia/SS Bucket
Frame work made of MS Tube
Mounted on 75 mm castors
Finish: Epoxy powder coated
Also available in SS frame work and SS Basin/Bucket
Specifications
Size: 18"x18"x18"
M.S. Tubular Frame fitted with PVC stump
CRC sheet duly double press bent
Pre-treated and Epoxy Powder Coated
Also available in Stainless Steel Model
Specifications:
Model No. SAS-M14 (REG.)
Intensity 30000 Lux
Halogen Bulb 24 V-100 W
Reflector Aluminum
Temp. increase at head area
dome dia 14"
Finish Oven Baked
Specifications:
Finger touch movements
Aluminium dome 19"
High Light Intensity 50, 000 Lux 10%
Halogen Bulb 24 V/ 150W-24 V/250 W
Features
Easy to use
Fine finish
Durable
Specifications
Max Vacuum: 600 mm Hg
Operation: Foot Operated Manual
Pump type: Piston type
Base: M.S. Powder Coated
Years of warranty: 1
Shipping carton: 1
Configuration: With Glass Jars and complete set of tubing. 2x750 ml
Features
Fine finish
Tough construction
Easy to use
Specification
It is a new generation nebulizer. It reduces liquid medication to tiny particles by compressing air. The tiny particles can be inbreathe by the patients.
Power Supply: AC220220V, 501Hz
Max negative pressure compressing pump: ?0.15 MPa
Free air flux compressing pump: ?
Max nebulizing rate: ?0.10 ml/min
Noise: ?65 dB
Balken Beam Frame LPS-152 Product Details
Specification
Made from MS/SS vertical, longitudinal and transverse tubes with clamps and pulley
Specifications
Seamless Dessing Drums (S.S) 304/202 G- SS
Sizes: 6"x4", 6"x6", 9"x5", 9"x9", 11"x5", 11"x9", 14"x9", 15"x12"
Water bath for 1 Ltrs. Capacity | Can be provided at an extra cost |
Water Bath with Digital Controller | Can be provided at an extra cost |
Condenser (Corning Glass) Double Coiled | Can be provided at an extra cost |
Digital RPM/Speed Meter | Can be provided at an extra cost |
Features
Dimensionally stable
Fine finish
Rust proof
PARAMETERS | MODEL ACA - 1 | MODEL ACA - 2 | MODEL ACA - 3 | MODEL ACA - 4 | MODEL ACA - 5 |
Inner Dimensions (Dia x Height) | 250x450mm | 300x500mm | 350x550mm | 450x600mm | 550x750mm |
Inches Conversion | 10 x 18 | 12 x 20 | 14 x 22 | 18 x 24 | 22 x 30 |
Capacity | 22 ltrs | 40 ltrs | 50 ltrs | 98 ltrs | 152 ltrs |
Working Load | 2.0 KW | 2.0 KW | 3.0 KW | 4.0 KW | 6.0 KW |
Gasket | Made of Neoprene Rubber | ||||
Sterilizing pressure | 1.2 kgf / cm (15psi)at 121°c | ||||
Pressure Gauge | 0-2.1 kgf / cm² (30 psi) | ||||
Operating pressure | From 15 to 20psi (Adjustable) | ||||
Inner Pressure Tank | Stainless Steel (SS-304) | ||||
Top Lid | Mild Steel Plate lined with Stainless Steel from inside | ||||
Basket | Made of Stainless Steel | ||||
Lid Tightening | Radial Locking system worked by handle | ||||
Lid Opening | Paddle lifting device | ||||
Water Level Indicator | Fitted on the outer chamber | ||||
Boiler – Hydraulically Tested | Upto +40 psi | ||||
Accuracy | + 3 psi | ||||
Controller (PLC Based) | µProcessor Based Fully Automatic Fuzzy Logic Control System. | ||||
Display | 16x4 line Alphanumeric Digital LCD with backlet display with Set value (SV) and Process Value (PV) | ||||
Timer (Auto Time Control) & Buzzer | Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end. | ||||
Safety Device | Spring Loaded Type | ||||
Water Draining System | Hand Operated Valve | ||||
Heating | BY ISI Marked Immersion Heaters | ||||
Steam & Vacuum Release | By Valve | ||||
Digital Pressure Controller | With electronic transducer and siphon. | ||||
PLC Based Control System | Touch Screen (HMI) with respect to time and temperature programmable by user. | ||||
Customized Programme | with inbuilt data recording in pen drive. Facility also available | ||||
Power Supply | 220/230V AC, 50/60Hz |
PARAMETERS | MODEL ACT- 1 | MODEL ACT – 2 | MODEL ACT – 3 | MODEL ACT – 4 | MODEL ACT – 5 | MODEL ACT – 6 |
Inner Dimensions (Dia x Height) | 250x450mm | 300x500mm | 350x550mm | 400x600mm | 450x600mm | 550X750MM |
Inches Conversion | 10 x 18 | 12 x 20 | 14 x 22 | 16 x 24 | 18 x 24 | 22 x 30 |
Capacity | 22 ltrs | 40 ltrs | 50 ltrs | 78 ltrs | 98 ltrs | 152 ltrs |
Working Load | 3.0 KW | 4.0 KW | 4.0 KW | 5.0 KW | 6.0 KW | 7.5 KW |
Gasket | Made of Neoprene Rubber | |||||
Sterilizing pressure | 1.2 kgf / cm (15psi)at 121°c | |||||
Pressure Gauge | 0-2.1 kgf / cm² (30 psi) | |||||
Operating pressure | From 15 to 20psi (Adjustable) | |||||
Steam Jacket | Stainless Steel (SS-304) argon welded | |||||
Top Lid | Made of Stainless Steel | |||||
Lid Tightening | Radial Locking system worked by handle | |||||
Lid Opening | Paddle lifting device | |||||
Water Level Indicator | Fitted on the outer chamber | |||||
Boiler – Hydraulically Tested | Up to +40 psi | |||||
Accuracy | + 3 psi | |||||
Safety Device | Spring Loaded Type | |||||
Water Draining System | Hand Operated Valve | |||||
Heating | BY ISI Marked Immersion Heaters | |||||
Steam & Vacuum Release | By Valve | |||||
Power Supply | 220/230V AC, 50/60Hz |
Present Pressure Operation | Automatic Switch Piezostat (Pressure Control Switch) |
Heater Safety | Automatic cut-off Device |
Pre-set Time Operation | By Mechanical / Digital Timers Analogue 0-60 minutes |
Temperature Display | By Dial Type / Digital Temperature Indicators with LED display. |
Temperature Recording | Thermograph with / without digital display - Circular Type |
Model No | BSC-1 | BSC-2 | BSC-3 | BSC-4 |
Working Table Size | 2'' x 2'' | 3'' x 2'' | 4'' x 2'' | 6'' x 2'' |
Working Size | 2'' x 2'' x 2'' | 3'' x 2'' x 2'' | 4'' x 2'' x 2'' | 6'' x 2'' x 2'' |
HEPA Filter Size | 2'' x 2'' x 6" | 3'' x 2'' x 6" | 4'' x 2'' x 6" | 3'' x 2'' x 6" |
No. of Motor/Blower | 1 | 1 | 1 | 1 |
Illumination | 1 x 40 w | 1 x 40 w | 2 x 40 w | 2 x 40 w |
Model No. | Volume | Wattage |
US 60 | 60 Ltr | 1000 W |
US 120 | 120 Ltr | 1500 W |
US 200 | 200 Ltr | 2000 W |
US 280 | 280 Ltr | 2500 W |
Specifications
Simple and Convenient to use
Low Power Consumption Equipped with functional switch
Automatic Power off when no signal is detected for 5 seconds
Visual Window Indication for Low Battery
Pulse beep
Model No. | TCR - 4 | TCR - 5 | TCR - 6 |
No. of Shelves | 4 | 5 | 6 |
Lighting Facility in Shelves | 3 | 4 | 5 |
Total No. of Fluorescent Tube | 12 | 16 | 20 |
Distance Between Shelves | 16" | ||
Platform Size | 48" X 21" | ||
Electric Supply | AC 230V, 50/60Hz |
Model No. | OVI 1 | OVI 2 | OVI 3 | OVI 4 | OVI 5 | OVI 6 | OVI 7 | OVI 8 |
Inner Chamber in MM | 900x600x600 | 900x900x900 | 1200x900x900 | 1500x900x900 | 1800x900x600 | 1800x900x900 | 2400x900x900 | 2400x1200x1200 |
Feet Conversion | 3 x 2 x 3 | 3 x 3 x 3 | 4 x 3 x 3 | 5 x 3 x 3 | 6 x 3 x 2 | 6 x 3 x 3 | 8 x 3 x 3 | 8 x 4 x 4 |
Trays Capacity | 12 ltrs | 18ltrs | 24 ltrs | 24 ltrs | 36 ltr | 48 ltrs | 60 ltrs | 96 ltrs |
Heating Load | 5.0 0 KW | 6.00 KW | 7.00 KW | 10.00 KW | 10.00 KW | 15.00 KW | 15.00 KW | 18.00 KW |
Temperature Range | 50°C to 250°C | |||||||
Temp. Controller | By Microprocessor Based PID Digital Temperature Indicator cum Controller. | |||||||
Temp. Sensitivity | +5°C. | |||||||
Air Circulation | By forced convection system | |||||||
Relay | Solid state electronic relay with protective heat sink / Contractor |
Controlling of Temperature | By Profile (Micro Programmable Controller) |
Audio Alarm System | Activates at end of cycle Buzzer. |
Timer Facility | Can be in built with Digital Electronic Timer |
Trays | Aluminum or SS at an extra cost |