The oils and fluids used in machines pick up minute solid contaminants during working. Actually oil molecules and additives break down chemically due to aging, pressure, temperature, moisture etc., and get oxidised to form polar compounds. These compounds combine together to form an insoluble sediment which is termed as vanish/tar. Most machine malfunctions are due to this contaminants which stick on to the active surfaces of the machine, increasing abrasion and reducing lubrication.

Our range of oil cleaning systems work on the principle of electrostatic.
The oil is circulated through the special electrostatic cell provided in the machine. This cell induces electrostatic charge on suspended solid contaminants in oil/ fluids. These charged suspended particles moves under electric field and deposits on dielectric media provided in the cell.

Pon OilCare cleaning machine can be used for hydraulic , lubricating oils and synthetic fluids which are non conductive and have less than 500PPM moisture.

• Reduce machine down time


• Machine Can be put on line


• Removes both polar, non-polar & neutral particles


• Filtration efficiency is down to 0.01 micron


• Reduce environmental liabilities


• Prevents sticking or friction of moving parts such as servo/directional valves


• Increases heat transfer efficiency in heat exchangers by reducing deposits


• No clogging & pressure losses as in mechanical filtration


• Increases oil life and reduces maintenance

• Works on 230V single / 440V three phase


• Maximum power consumption: 250W Micro-controllerbased system with LCD display consisting of:


• Fault indication - Oil temperature - High voltage applied - Current flow (mA) - Running Hrs

• Powder sieve can be used for fresh & reclaimed powder. It uses a vibrating Screen to separate powder particles by its size. Powder particles passing through the screen are deposited in to the feed hopper, fluidized and pumped to spray System.


• Electric vibrator motor ensures low noise & low power consumption.


• High Sieving efficiency.


• Quick and convenient color change.

• Intelligent SprayGun with Digital Regulators and LED display Can be operated through a communication cable.


• Hi-tech Powder Spray Gun
  Integrated 100kv built-in Electrostatic high voltage generator for uniform Charging of profile with enhanced transfer efficiency and reduced wastage. Well balanced powder spraygun which handles all type of complex profiles flat surface & pipes.


• Powder flow, Air, fluidizing Pressures, HV Digital display.


• Rugged control panel, Easy flow feed pump.


• Spray guns are available for metallic powders

• In automatic systems the recycled powder collected from the cyclone separator is transferred to a vibrating powder siever, there it separates the dust from powder.


• The sieved powder is dropped in to the powder hopper and mix with the virgin powder. The whole process is monitored by powder level sensors and the PLC system.


• Two different Hoppers are provided for circulated & fresh powder. Touch Screen operation, Automatic fresh powder supply with level monitoring, automatic level maintaining & lense movement.

• Micro Controller based instrument for measuring High voltages.


• To monitor gun voltage & ground resistance, Portable can be carried in a hand held box.


• Measures Tip voltages (0-100kV positive - negative).


• Measures Ground quality.


• Best Suits to powder coating & Painting Plants