Our Products
Seamless SS Pipes are extensively used for conveyance of fluids intended for critical high temperature and general. Seamless SS Tubes are used in Under similar service conditions in heat transfer process equipments like boilers, super heaters, heat exchangers, condensers etc. General engineering and Process Instrumentation.
Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
The following table represents size rang, product standards and materials grades of Seamless SS Pipes & Tubes
DESCRIPTION | SIZE RANGE | SPECIFICATION | GRADES |
S.S. Seamless Pipes |
1/8" NB to 16" NB
|
ASTM A-312, A-213, |
304, 304L, 309, 310, 310S, 316, 316L, 321, 347, 17-4pH, 904L |
S.S. Welded Pipes |
1/4" NB to 36" NB |
ASTM A-312, A-778, |
|
High Nickel alloys/ super alloys Pipes |
High Nickel alloys/ super alloys Pipes |
High Nickel alloys/ super alloys Pipes |
UNS 2200 ( NICKEL 200 ) |
RANGE:
1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.
Stainless SteelASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H
Duplex SteelASTM / ASME SA 240 UNS NO. S 31803, S 32205, S 32550, S 32750, S 32760.
Stainless Steel: ASTM A 409, A 182, A276Grade: 304, 304L, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310SNickel Alloys: B162, B127, B463, B576, B168, B443Supply Conditions:
Annealed/Solution Annealed.
Hardened & Tempered.
Strain Hardened.
Centerless Ground.
Centerless Ground & Polished.
Cold Drawn.
SmoothTurned & Polished.
Forged & Rough Turned.
Buffed (Mirror finish).
100% ultrasonically tested.
We supply Stainless Steel flanges, High Nickel alloy Flanges and backup stainless pipe flanges. Our pipe flanges come in a wide selection of dimensions and alloys. Flanges are available in Slip On, Blind, Weld neck, and Socket weld, Threaded, Lap Joint, Orifice and Spectacle Blinds, Tongue & Groove & Ring Joint Types, Vacuum Flanges, Exhaust Flanges, Profile Flanges. Pressure rating class of 150, 300, 600, 900, 1500 & 2500 and size from 1/2 NB to 64 NB sizes Flanges are manufactured as per ANSI B 16.5, B16.47, MSS SP 44, API, BS, AWWA, DIN standards
The following table represents size range, product standards and material grades of Flanges.
Material : | SS304, SS304L, SS316, SS316L, SS316Ti, SS321 |
We are exporter of fasteners like stainless steel fasteners, high nickel fasteners that meets diverse material specification of our worldwide client. These fasteners can be used for closing bags, box and envelopes. Our range of stainless steel fasteners and alloy steel fasteners are used for variety of attachment purposes and can be fastened and unfastened repeatedly. Our stainless steel fasteners, alloy steel fasteners are engineered to allow articulation rather than affixment.
TYPESBOLTSHEX HEAD BOLTS , HEXAGON HEAD SCREW , MUSHROOM HEAD SQURE NECK BOLTS , T- HEAD BOLTS , WING SCREW , EYE BOLT , LIFTING EYE BOLT
SCREWPAN HEAD SLOTTED SCREWS , CHEESE HEAD SLOTTED SCREWS , COUNTERSUNK HEAD SLOTTED SCREWS , COUNTERSUNK RAISED HEAD SLOTTED SCREWS , PAN PHILLIPSE HEAD SCREW , COUNTERSUNK PHILLIPSE RAISED HEAD SCREWS , SLOTTED CHEESE TRIM HEAD MACHINE SCREWS , SOCKET HEAD ALLEN CAP SCREWS , ALLEN COUNTERSUNK SOCKET HEAD CAP SCREWS , SOCKET HEAD SHOULDER SCREWS , SOCKET HEAD CAP SCREW LOW HEAD , HEXAGON SOCKET SET SCREW WITH FLAT POINT , HEXAGON SOCKET SET SCEWS WITH CONE POINT , HEXAGON SOCKET SET SCREW WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH CUP POINT , IMPRIAL SOCKET CAP SCREWS .
NUTSHEXAGON NUTS , HEXAGON COUPLING NUTS , HEXAGON THIN NUT , SQUARE NUT , HEXAGON CASTLE NUTS , SELF LOCKING NUT , HEXAGON DOMED CAP NUTS.
WASHERPLAIN WASHER , PLAIN BIG OD WASHER , PLAIN SMALL OD WASHER , SPRING LOCK WASHER , SPRING WASHER HEAVY DUTY , TOOTH WASHER , SERRATED STAR WASHR , TAB WASHER WITH ONE TAB . , TAB WASHER WITH TWO TAB.
Stainless Steel |
Non Ferrous Metal |
High Nickel alloys |
AISI 302, 304, 304L,316, 316L, 310, 317, 317L, 321,904L etc. |
Titanium, Nichrome, Al.Bronze Phosphorous Bronze, etc. |
UNS 2200 ( NICKEL 200 ) |
If you require stainless steel Scrap, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our stainless steel Scrap or any of our other products.
Grades201, 202, 301, 304, 304H, 304L, 309, 310, 310S, 316, 316L, 321, 347, 47H, 403, 410, 414, 416, 420, 430, 440B, 446, 904L, UNS S31803Inconel (600, 625, 825)Hastalloy (C-276)Monel (K-500/400)Titanium (Grade I & II)Duplex (2205 & 2507)
TYPE | C MAX | Mn MAX | P MAX | S MAX | SI | Cr | NI | Mo | Others |
304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00/20.00 | 8.0/10.00 | - | - |
304L | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.00/20.00 | 8.00/10.00 | - | - |
304N | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00/20.00 | 8.00/10.00 | - | NO.101 0.016 |
308 | 0.08 | 2 | 0.045 | 0.03 | 1 | 19.00/21.00 | 10.00/12.00 | - | - |
309 | 0.2 | 2 | 0.045 | 0.03 | 1 | 22.00/24.00 | 12.00/15.00 | - | - |
310 | 0.25 | 2 | 0.045 | 0.03 | 1.5 | 24.00/26.00 | 19.00/22.00 | - | - |
310$ | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00/26.00 | 19.00/22.00 | - | - |
314 | 0.25 | 2 | 0.045 | 0.03 | 1.50/3.00 | 23.00/26.00 | 19.00/22.00 | - | - |
316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 | - |
316L | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 | - |
316F | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00/18.00 | 10.00/14.00 | 1.75/2.50 | - |
316TI | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 | TI 5*C MIN. |
316Cb | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00/20.00 | 10.00/14.00 | 2.00/3.00 | Nb. 10*C MIN |
317L | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 | - |
321 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.00/19.00 | 9.00/12.00 | - | Ti 5*C MIN |
347 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.00/19.00 | 9.00/12.00 | - | Nb Ta 10*C MIN |
410 | 0.15 | 1 | 0.04 | 0.03 | 1 | 11.50/13.50 | - | - | - |
410$ | 0.08 | 1 | 0.04 | 0.03 | 1 | 11.50/13.50 | 0.60MAX | - | - |
420 | 0.15MIN | 1 | 0.04 | 0.03 | 1 | 12.00/14.00 | - | - | - |
440A | 0.60/0.70 | 1 | 0.04 | 0.03 | 1 | 16.00/18.00 | - | 0.75MAX | - |
440B | 0.75/0.95 | 1 | 0.04 | 0.03 | 1 | 16.00/18.00 | - | 0.75 MAX | - |
440C | 0.95/1.20 | 1 | 0.04 | 0.03 | 1 | 16.00/18.00 | - | 0.75 MAX | - |
446 | 0.2 | 1.5 | 0.04 | 0.03 | 1 | 23.00/27.00 | - | - | N.O.25 MAX |
Our company is a well known manufacturer and supplier of forged high pressure fittings, socket, weld & NPT. All our products are manufactured by superb quality of steel forgings and are high in functionality & endurance. The array of socket weld fittings forged high pressure fittings, steel high pressure fittings, and steel socket weld fittings can be availed in numerable shapes and sizes that makes them capable for manifold industrial applications. These forged high pressure fittings can resist extreme pressure and can be practiced as permanent welded connection.
Our company is a well known manufacturer and supplier of forged high pressure fittings, socket, weld & NPT. All our products are manufactured by superb quality of steel forgings and are high in functionality & endurance. The array of socket weld fittings forged high pressure fittings, steel high pressure fittings, and steel socket weld fittings can be availed in numerable shapes and sizes that makes them capable for manifold industrial applications. These forged high pressure fittings can resist extreme pressure and can be practiced as permanent welded connection.
1/8" NPS through 6" NPS (Sch 10S and Sch 40S)[Other Schedule sizes available on request]
TitaniumWelded Pipe3/4" NPS through 24" NPS (Sch 10S and Sch 40S)[May be Continuous Rolled & Welded to 8" Sch 40S or Brake Press formed and Welded from 6" NPS and above.][Other Schedule sizes available on request.]
TitaniumTubeTitanium Seamless TubeOD - 1/8" (3.18 mm) to 1-1/2" (38.1mm) Wall - .016" (4 mm) to .065" (1.65 mm) [Other OD Sizes and Walls available on request.]TitaniumWelded Tube
OD - 1/2" (12.7 mm) to 2" (50.8 mm) Wall - .028" (.71 mm) to .065" (1.65 mm) [Other OD Sizes and Walls available on request.]
160" Dia. to under 4-1/2" Dia. x RL [ Up to 17-3/4"][Bar can be Saw Cut to any Custom size.] [By ASTM definition, Bar has a cross-sectional area less than 16 in2. Larger sizes, however, are often also referred to as Bar.] | |
Square Bar1/4" Square to 1" Square x RL [Up to 14'] Bar can be Saw Cut to any Custom size.[By ASTM definition, Bar has a cross-sectional area less than 16 in2. Larger sizes, however, are often also referred to as Bar.] |
Euro AlloysSeamless Pipe1/8" NPS through 6" NPS (Sch 10S and Sch 40S)[Other Schedule sizes available on request]
Euro AlloysWelded Pipe3/4" NPS through 24" NPS (Sch 10S and Sch 40S)[May be Continuous Rolled & Welded to 8" Sch 40S or Brake Press formed and Welded from 6" NPS and above.][Other Schedule sizes available on request.]
Euro AlloysTubeEuro Alloys Seamless TubeOD - 1/8" (3.18 mm) to 1-1/2" (38.1mm) Wall - .016" (4 mm) to .065" (1.65 mm) [Other OD Sizes and Walls available on request.]Euro AlloysWelded Tube
OD - 1/2" (12.7 mm) to 2" (50.8 mm) Wall - .028" (.71 mm) to .065" (1.65 mm) [Other OD Sizes and Walls available on request.]
We are offering a widest range of ANSI: elbow by using premium quality of material. These elbows are used in welded pipe fittings.
We are the main supplier of this product.