Post Buy Requirement

Power Grace Industries
Ahmedabad, Gujarat

Write a Review

Call Now

TILE CLEANER

Get Best Quote

WALL CARE PUTY

Get Best Quote

$SBR LATEX$

SBR LATEX

Get Best Quote

POWER TILES SPACER

Get Best Quote

Welcome to Power Grace Industries

Manufacturer / Exporter / Supplier / Retailer / Distributor / Trader Of Tile Cleaner, Wall Care Putty, Sbr Latex, POWER TILES SPACER

Our Product Range

POWER TILES SPACER

Price On Request
- Packing100 pcs. in one pouch.
- DescriptionTile Spacers are made of virgin flexible PVC .Tile spacers used for laying of ceramic ,vitrified porcelain, stone and marble in grout. The spacers are manufactured to exact dimensions for even grout lines and perfect finish. our tile spacers assure better
- Available in
...more
Get Latest Price View Details
WALL CARE PUTY

Price On Request
- Application MethodAfter thoroughly mixing of PowerGrace Wall Care Putty, apply the first coat on the moistened wall surface from bottom to upward direction uniformly with the aid of putty blade. This would ensure minimum wastage and proper finish. After drying of f
- MixingMix Powergrace Wall Care Putty with 35-40% clean water, Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of Powergrace Wall Care Putty uniformly on already moistened surface with the help of putty blad
- NoteGenerally the cause of efflorescence on the wall surface is the brick masonry, which is due to the quality of bricks, sand and water. If the effect of efflorescence is very high on the brick masonry then proper care should be taken to control the efflores
- Surface PreparationBefore applying PowerGrace Wall Care Putty remove all loosely adhering material from the wall surface with the help of sand paper, putty blade or wire brush. The substrate should be clean, free from dust, grease and loose materials. Moisten the wall with
- DescriptionWall Care Putty is ready to use water resistant white cement based finishing/ smoothing material for indoor and outdoor plastered surfaces.
- BenefitsBeing a cementitious material it has better adhesiveness and durability with the concrete walls. Can be applied on both interior and exterior walls and ceilings. Does not require any water curing after application thus saving time & cost. Bein
- Packaging Size20kg, 40kg
- Value BaseAll technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
- Application PrecautionsMixing of the Powergrace Wall Care Putty is very important , hence extreme care is to be taken for proper and thorough mixing. It should be preferably mixed with mechanical stirrer in order to get best results. It is very important that during mixing the
- CoverageThe coverage area of PowerGrace Wall Care Putty on smooth normal mortar wall is an approx 18-22 sq. ft / kg / mm in 2 coats on smooth finish substrate in optimum conditions.
- Substrate PreparationIt is very important and essential that the surface is wet thoroughly before the application of PowerGrace Wall Care Putty. The surface should be wet during application. This ensures higher bonding strength, easy work ability & higher coverage with the su
- Precautions During UsageThough it contains non-toxic materials but still care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or mouth, wash with plenty of clean water. Keep it in a dry place and out of reach of children.
- Health & SafetyFor information and advice on the safe handling. Storage and disposal of chemical products. users shall refer to the most recent material safety data sheet containing physical, ecological, toxicological and other safety - related data.
- UsagesWhite cement based finishing/ smoothing material for indoor and outdoor plastered surfaces. Renders a smooth and durable surface and acts as an under layer for all kinds of decorative paints.
- Storage / Shelf-lifePowerGrace Wall Care Putty should be stored in a dry place. For best results use it within 12 months from date of manufacturing.
...more
Get Latest Price View Details
TILE CLEANER

Price On Request
- LimitationNot effective against stubborn dirt and stain Not effective against acrylic, solvent stains
- UsagesTILE & STONE CLEANER can be used in interior & exterior situations such as: Walls Floors Kitchens Bathrooms Countertops Heavy trafficked areas
- PrecautionsKeep out of reach of children. Wear suitable protective clothing, gloves and eyes/face protection. After contact with skin, wash immediately with plenty of clean water. In case of contact with eyes rinse immediately with plenty of clean water and seek med
- NoteThe information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at a
- FeaturesDaily maintenance General purpose cleaner Effective against lime scales Mild enough to use on stones / porous tiles
- Disposal / SpillageSpillage of any of the POWER TILE & STONE CLEANER product should be removed with plenty of water. Disposal of such material or empty packaging should be in accordance with local waste disposal authority regulations.
- Instructions For UseAlways test on a small area for the suitability of this cleaner on different background surfaces. Liberally apply the POWER TILE & STONE CLEANER to the area to be cleaned. Using a stiff bristled brush or a scouring pad, thoroughly scrub the area treat
- DescriptionA highly effective multipurpose cleaner designed for everyday maintenance of tiles, marbles & natural stones etc. Suitable as a general purpose cleaner. It is very much safe and less reactive (compared to other cleaners based on Hydrochloric acid) especia
- Recommended SurfaceGlazed Floor Tile Quarry, Stone, Slate- dilute as necessary Terrazzo, Marble, Terra cotta, Brick & Unglazed Floor – dilute & pre-wet the surface prior to application to reduce absorption
- Shelf Life & StoragePOWER TILE & STONE CLEANER has a shelf life of 18 months in original unopened container. Store in dry conditions between 5°C and 30°C, protect from direct sunlight.
...more
Get Latest Price View Details
$SBR LATEX$
SBR LATEX

Price On Request
- Packaging Size1liltre, 5litre, 10litre
- DescriptionPOWERGRACE SBR latex is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added direct
- PrecautionsPOWERGRACE SBR (latex) should not come in contact with skin and eyes or be swallowed. Protective gloves and goggles should be worn. POWERGRACE SBR (latex) should not come in contact with skin and eyes or be swallowed. If contact with skin occurs,
- BenefitsSingle component liquid which improves cohesion and workability and easily gauged as required. Provides waterproof repairs, renders and toppings which are resistant to freeze/thaw cycling. Good tensile, flexural and UV resistant properties which f
- Shelf Life & StoragePOWERGRACE SBR (latex) has a shelf life of 12 months if kept in a dry and unopened condition.
- Surface PreparationThe object of the surface preparation is to achieve a clean sound surface with a good mechanical key. All substrates should be cleaned and free of dust, plaster, oil, paint, grease, corrosion deposits, and any other deleterious substances. Latence should
- PrimingReinforcing steel must be primed with zinc rich primer immediately after cleaning. The concrete substrate should be thoroughly dampened with water and any excess removed before being primed by thoroughly scrubbing in a slurry coat of 1 volume SBR (latex)
- FirePOWERGRACE SBR (latex) is non flammable.
- Additional GuidanceAll surfaces including edges must be primed. All applications should be wet on wet, the primer must not be allowed to dry. The level of added water in the mix designs may need adjusting to achieve the required consistency. In general water content
- UsagesFor waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades etc. In combination with cement As a bonding agent for usages in repair and plastering For making polymer mortar for repairs mortars etc. Treatment for leaching a
- CoverageSlurry primer - approximately 4- 5 m²/ liter depending on substrate porosity.
- CleaningTools and equipment should be washed with water immediately after use.
...more
Get Latest Price View Details

Ratings & Reviews

Share your thoughts with other customers for Power Grace Industries

Add Review

FAQs : Power Grace Industries

Where is Power Grace Industries located?

Power Grace Industries is located in Ahmedabad, Gujarat.

What range of products and services are available at Power Grace Industries ?

Company deals in POWER TILES SPACER, Sbr Latex, Tile Cleaner, Wall Care Putty etc.

Tell Us What are you looking for? Will call you back

Contact Us

Power Grace Industries (Power Grace Industries)
Address: 305, Dev Arc, Opp. Iscon Temple,S.G. Highway,., Ahmedabad, Gujarat, India
Share us via
Found Something Wrong with this Listing? Report Here.