Pranit Heat Electrical Mumbai, Maharashtra

DESCRIPTION : We are offering an exclusive range of Nozzle Heaters to our clients. These offered products are manufactured by making use of supreme quality raw material procured from the established vendors of the industry. Besides, the offered products are provided with a clamping band, which is made up of chrome nickel steel, supports system in transferring maximum heat. We have developed these products in accordance with the defined quality parameters of the industry so as to ensure their unsurpassed standards. Our valued clients can avail these offered tubes in different grades and specifications as per their requirements.   APPLICATIONS : 1. Extended Nozzles 2. Injection & Blow molding   FEATURES : 1. Higher Operating temperature 4000C 2. Available Effect of material Spillage  3. Very Robust Design 3. Delivers Better & Even Heat Transfer 4. Available with built in Thermocouple  5. Good for processing engineering plastics (nylon66, glass polyfill)

• Outer Sheath MaterialChrome Nickel Steel, welded end disc washer of same material.
• Maximum operating temperature 7500CSheath can be ground for precision tolerance (Only for heaters with crimped on leads)
• Heating ConductorNiCr 80:20
• Power± 10%
• Voltage24 to 250 Volts
• Leakage Current< 0.5 mA
• High Voltage800 V
• Surface LoadingUpto 150 watts/in 2
• Lead OrientationA) Crimped on Leads : PTFE/Fiberglass Flexible lead crimped on solid pin emerging from the heater.

• Outer Sheath MaterialChrome Nickel Steel, welded end disc washer of same material. Maximum operating temperature 750OC  Sheath can be ground for precision tolerance (Only for heaters with crimped on leads)
• Heating ConductorNiCr 80:20
• Power± 5%
• Voltage Range24 to 250 Volts
• Current Leakage< 0.5 mA
• High Voltage800 V
• Surface LoadingUpto 150 watts/in 2
• Lead OrientationPin M5 In Brass Nut Wiser
• Diameter14mm / 16mm
• Heater Length5" To 50"L

• Cross Section1.5MM, 1.8MM
• Sheath MaterialChrome Nickel Steel and Nickel, Brass
• Insulation MaterialHigh purity MgO
• Heating ElementNiCr 80:20
• Lead WiresTeflon Insulated
• Voltage RangeMaximum 250 Volts, standard 230 Volts
• Power RatingDepending on application
• Power Tolerance± 5%  -  ± 2% available on request
• H. V. Testing800 V
• Insulation Resistance> 100 MΩ
• Current Leakage< 0.5 mA
• Sheath Temperature750oC max
• Adapter Temperature150oC max
• Length Tolerance± 2%

• Sheath MaterialChrome Nickel Steel
• Insulation MaterialHigh purity MgO
• Heating ElementNiCr 80:20
• 'J' type (Fe K)Thermocouple
• 'K' type (Cr AI)Grounded or Ungrounded
• Connection WiresStandard nickel wires with PTFE coating
• Voltage Range24 to 250 Volts
• Power RatingDepending on application
• Power tolerance± 10%
• H. V. Testing800 V (Bent Heater)
• Insulation Resistance> 5 MΩ
• Current Leakage< 0.5 mA
• Sheath Temperature7500C max
• Adapter Temperature1500C max
• Length ToleranceHeated length ± 2%
• Unheated Length5 - 10mm on bottom end, 50mm at the adopter end. Larger lengths available on request.

• heath MaterialChrome Nickel Steel
• Insulation MaterialHigh purity MgO
• Heating ElementNiCr 80:20
• 'J' type (Fe K)Thermocouple
• 'K' type (Cr AI)Grounded or Ungrounded
• Connection WiresStandard nickel wires with PTFE coating
• Voltage Range24 to 250 Volts
• Power RatingDepending on application
• Power tolerance± 10%
• H. V. Testing800 V (Bent Heater)
• Insulation Resistance> 5 MΩ
• Current Leakage< 0.5 mA
• Sheath Temperature7500C max
• Adapter Temperature1500C max
• Length ToleranceHeated length ± 2%
• Unheated Length5 - 10mm on bottom end, 50mm at the adopter end. Larger lengths available on request.