Other Products / Services #234947

Barcode Scanners, Image Based Camera, Vision Systems, RFID, Magnettic Coded identification.

Thrue- beam Technology Detection of transparent / Non- transparent , opaque or printed labels,   Detection 0.1 to 225 MM F

Base and case

High-resistance polyamide based (PA) technopolymer.

Black base.

Case in the following colours:

• C2: RAL 2004 orange, glossy finish.
• C3: RAL 7035 grey, glossy finish.
• C1: RAL 7021 grey-black, glossy finish.
• The ultrasonically welding between the base and the case prevents separation and avoids dust penetration.

Window

Transparent polyamide based (PA-T) technopolymer, moulded over the case and with a perfect seal (avoid contact with alcohol during cleaning operations).

Display

It indicates the displacement of the mechanism controlled by the spindle from the start position (0). Four-digit roller counter. The digits of red rolls show the decimal values. An additional graduated scale next to the last decimal digit offers further accuracy of reading. The display can be in different positions (see "Example of description for ordering").

• AN: inclined display, counter in upper position.
• AR: inclined display, counter in lower position.
• FN: front display, counter in upper position.
• FR: front display, counter in lower position.

Internal gasket

O-ring front sealing in NBR synthetic rubber, between the case and the boss.

Rear gasket

Foam polyethylene, supplied.

Standard executions

Bushing with Ø 14 mm H7 reamed hole, fitting to shaft by means of a supplied grub screw with hexagon socket and cup end, included in the supply.

• DD51: black-oxide steel boss.
• DD51-SST: AISI 303 stainless steel boss.

Direction of rotation

• D: clockwise. Increasing values with clockwise rotation of the boss.
• S: anti-clockwise. Increasing values with anti-clockwise rotation of the boss.

Features and applications

Direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven applications (see "Example of description for ordering").

Ergonomy and design

Compact roller counter, ergonomically designed digits for rapid reading. The readability of the counter is increased by the magnifying window.

Special executions on request

• Special readings after one revolution.
• Case in different colours.

Completely sealed digital position indicators with IP 67 protection class, see EN 60529 table obtained by means of a brass bushing with double seal ring inside the rear cavity of the base.

LB - locking device

The DD51-LB position indicators are designed to lock the spindle on which they are mounted to avoid the risk of accidental adjustment alterations due to vibrations. To lock or unlock the spindle rotation, simply move the lever, in pos. A equivalent to unlocked spindle, in pos. B equivalent to locked spindle.

Following repeated locking cycles, the special device is highly wear resistant and functions perfectly over time.

To order the indicator with spindle locking add the –LB index after the code and description (e.g. CE.84101-LB DD51-AN-00.50-D-C3-LB).

Types

• Type A: without handle
• Type R: with revolving handle
• Bore codes
• Version B: without keyway
• Version K: with keyway
• Aluminium pressure die casting
• Hub machined
• Rim turned
• plastic coated
• black, RAL 9005, textured finish SW
• silver, RAL 9006, textured finish SR
• Rim concentric and square to bore < 0.4
• Cylindrical Revolving handles  GN 798.2 -
• Plastic, Technopolymer
• black, matt

Information

• Spoked handwheels GN 924 are distinguished by modern design.
• The removable plastic cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end.

Accessory

Countersunk washers GN 184 are to be ordered separately

Technical information

1. Keyway P9 DIN 6885 
2. Cross holes GN 110
3. ISO-Fundamental Tolerances 

Lever body

Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish.

Push button

Technopolymer in Ergostyle colours, glossy finish.

Standard executions

• Glass-fibre reinforced technopolymer clamping element with retaining pin, black colour, with knurling on the protruding part to make initial tightening easier. AISI 302 stainless steel return spring.
• ERX-B: brass boss, threaded blind hole.
• ERX-SST: AISI 303 stainless steel boss, threaded blind hole.
• ERX-p: zinc-plated steel threaded stud, chamfered flat end UNI 947 : ISO 4753 (see Technical data).
• ERX-SST-p: AISI 303 stainless steel threaded stud, chamfered flat end UNI 947 : ISO 4753 (see Technical data).

Features and applications

Particularly suitable when the lever turning angle is limited owing to lack of space.

Compared to other types of adjustable handles with metal retaining screw this solution offers:

• absolute electric insulation for the operator
• no visible steel parts subject to rust
• more comfortable lever release.
• Stress resistance
• Adjustable handles are generally used for repetitive clamping operations sometimes with very high-frequency.
• Therefore, the stress resistance (i.e. the resistance to repeated tightening cycles) of the handle unit is particularly important and, especially, the strength of the toothed element which transmits the tightening force from the handle to the threaded element (boss or stud).
• In fact, the results of several laboratory tests, perfomed with a special instrument that simulates the most severe use conditions, have shown that e.g. ERX.78 adjustable handle can withstand without yielding more than 100, 000 tightening cycles, under the action of a force of 490 N (see graphic).
• The special glass-fibre reinforced technopolymer enables the ELESA adjustable handles to guarantee stress resistance values which are much higher than the ones generated under normal working conditions.

Other executions available

• Lever body in orange (C2) with black push button (C1).
• Example: code 233061-C2-C1 description ERX.30-C2-B-M3-C1.

Instructions of use

For clamping, lift the lever to disengage the clamping device teeth and bring it back to start position. By releasing the lever, the return spring automatically engages the teeth.

Standard executions

• L.652-B: brass boss, plain or threaded blind hole.
• Black, orange, yellow, red and green colours, matte finish.

L.652-p: zinc-plated steel threaded stud, chamfered flat end UNI 947 : ISO 4753 (see Technical data).

Tensile stress : F values reported in the table are the result of breaking tests carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.

Standard executions

• LX: zinc-plated steel threaded stem.
• LX-S: zinc-plated steel threaded stem, base with screwdriver slot.
• LX-AS: zinc-plated steel threaded stem, base with SBR rubber no-slip disk, supplied assembled to the base.

Rotating pin

Acetal based (POM) technopolymer, black colour.

Screw-covers

Polyester based (PBT) technopolymer, black colour, glossy finish, snap-in assembly.

Standard executions

• CFT-SH: pass-through holes for countersunk head screws.
• CFT-EH: hexagonal pass-through holes for cylindrical head screws, hexagonal head nuts or screws. CFT. hinge with boss or stud can be obtained by means of hexagonal head nuts or screws fitted into the assembly hole.

Types

• Type RG: Operation with knurled knob in plastic GN 7336 
• Type KG: Operation with wing knob in plastic
• Type HG: Operation with lever in plastic
• Type SG: Operation with Stainless Steel-Star knob
• Type KGN: Operation with Stainless Steel-Wing knob
• Type HGN: Operation with Stainless Steel-Lever

Lock housing

Stainless Steel AISI 303 NI

Latch

• Stainless Steel AISI 304
• Star knobs (Type SG)
• Stainless Steel AISI 304
• Sheet metal, drawn
• Hub, welded
• Operating handles (Type KGN, HGN)
• Stainless Steel AISI CF-8
• Operating handles (Type RG, KG, HG)
• Plastic (Polyamide PA)
• black, matt
• Protection class IP 65

Information

• Latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the latch ease the closing of the door.
• Latches with different cranks cover a latch distance A from 4 to 50 mm.
• The operating bolt of the stainless steel version is fitted with an O-ring for sealing.
• Latches GN 115 are supplied with loosely enclosed latch.

Polyurethane Tubes that we supply are procured from the trustworthy sources of the market. Widely used for general pneumatic tubing, our Polyurethane Tubes are widely in demand. We make available our flexible Polyurethane Tubes in different colors and lengths to suit the needs of the clients. Furthermore, our clients can obtain bulk quantities of our Polyurethane Tubes at the most competitive rates from us.

• Can be used in vacuum to –100 kPa
• Body types: Total of 51 models
• Thread material/Surface treatment (Treated or Non-treated): 2 types
• Selectable surface treatments: Brass (No plating), Electroless nickel-plated brass
• Applicable tubing O.D.

Round Type

• Metric ø2, ø3.2, ø4, ø6, ø8, ø10, ø12, ø16
• Inchø1/8'', ø5/32'', ø3/16'', ø1/4'', ø5/16'', ø3/8'', ø1/2''

Oval Type

• Metric ø3.2, ø4, ø6
• Inchø1/8'', ø5/32'', ø3/16''

Connection thread

• MetricM3, M5, M6
• R, Rc 1/8, 1/4, 3/8, 1/2
• G1/8, 1/4, 3/8, 1/2
• NPT10-32UNF, 1/16, 1/8, 1/4, 3/8, 1/2
• Uni1/8, 1/4, 3/8, 1/2

Seal method

• Sealant/Gasket seal
• Face seal
• Gasket sealUni thread

LEFS Series AC Servo Motor

• High output motor (100/200/400 W)
• Improved high speed transfer ability
• High acceleration/deceleration (20, 000 mm/s2)
• Pulse input type
• With internal absolute encoder
• Positioning repeatability: ±0.01 mm (High precision type)
• Clean specification: Complies with ISO Class 4 (ISO14644-1) (11-LEFS)
• Motorless specification is available.

• Better visibility and environmental resistance
• Easy element replacement
• The element and the bowl are integrated.
• Replacement can be done in hand.
• Reduced required maintenance space: Max. 46% reduction
• Regulator: Set pressure 0.05 to 0.85 MPa, 0.02 to 0.2 MPa
• Choose from a selection of pressure gauges:
• Square embedded type pressure gauge, Round type pressure gauge, Digital pressure switch

• Visualization of settings
• Simple 3-step setting
• Easy screen switching
• It is possible to change the settings while checking the measured value.
• Delay time:1.5 ms or less
• Current consumption: 25 mA or less
• IO-Link compatible

• A 20% reduction in power consumption can be achieved with the SMC “Blow gun” + “S coupler” + “Coil tube.”
• Pressure loss: 1% or less (Nozzle size: ø2.5)
• Available nozzles:
• Male thread nozzle, High efficiency nozzle with male thread,
• Low noise nozzle with male thread, Copper extension nozzle
• With flow rate adjustment function (-X54)

Rated flow range (L/min)

• 0.01 to 1 (0.01 to 0.5)
• 0.02 to 2 (0.02 to 1)
• 0.05 to 5 (0.05 to 2.5)
• 0.1 to 10 (0.1 to 5)
• 0.3 to 25 (0.3 to 12.5)
• 0.5 to 50 (0.5 to 25)
• 1 to 100 (1 to 50)
• 2 to 200 2 to 100
• (): For CO2

• It is possible to move the auto switch mounting position as desired.
• Direct mounting
• Connection port position: Select from side ported or axial ported
• (When a switch and angle adjuster are installed, only the side ported is selectable.)
• Low-pressure operation: 0.2 MPa (Size 10), 0.15 MPa (Sizes 15 to 40)
• It is possible to adjust the angle as desired.
• With auto switch (CDRB2 series: CDRB2W, CDRB2WU)

• The linear guide improves rigidity and accuracy.
• Dustproof and drip proof construction
• Dust cover material is selectable

• The combined mounting of a 3-port valve and a 5-port valve is possible.
• Power consumption: 0.1 W (With power saving circuit)
• A wide variety of manifold options are available, such as the aluminum body manifold, DIN rail, and stacking type manifold.
• Manifold type no.: SS5Y3, SS5Y5, SS5Y7, SS5Y9
• Supports Interface regulators

• Further improvements have been made on the CY1 series.
• The mounting dimensions are the same as those of the CY1 series.
• Upgraded bearing performance and reduced sliding resistance
• NPT thread and G thread are available as standard.

• Compliant with ISO Standards (21287)
• It is possible to mount small auto switches on 4 surfaces.
• With auto switch (CD55 series: CD55)

• Actuator stroke position is output with an analog signal.
• Repeatability: 0.1 mm
• Analog output
• 4 measurement ranges
• Switch output
• IO-Link compatible

• Compatible with ejector systems and vacuum pump systems
• Energy saving ejector
• Air supply is cut-off when vacuum is reached.
• Air consumption: 93% reduction (Under SMC’s measurement conditions)
• More efficient ejector: Suction flow increased by 50% (Compared to other SMC 1-stage ejectors)
• Energy saving efficiency: 93% reduction
• Improved low noise and suction flow by adoption of a high-noise reduction silencer
• Supply valve: N.O. specification: ZK2mA-X188: Single Unit, ZK2mA-X211: For Manifold

Compact and lightweight

• Overall length: Max. 11% reduction (6.7 mm shorter) [Body ported type]
• Port height: Max. 25% reduction (9.1 mm shorter) [Body ported type]
• Weight: Max. 74% reduction (65.1 g lighter) [Body ported type]
• Volume: Max. 39% reduction (14.1 cm3 reduction) [Box type]

4 mounting types:

• Direct mounting, Standard bracket mounting, L-bracket mounting,
• DIN rail mounting
• A silencer and standard bracket are available. (Body ported type only)

• All stainless steel (SCS13: Equivalent to stainless steel 304)
• Sealant not required
• Max. operating temperature: 260
• Grease-free

• By supplying compressed air, large blow and vacuum flow rates are available.
• A blow flow rate 4 times the supply air
• A vacuum flow rate 3 times the supply air
• Large passage diameter available for the suction of machining chips, particles, etc.
• Maintenance-free
• Mounting brackets are available.

Application examples:

• Blow: Blowing away water droplets and machining chips
• Vacuum: Vacuuming smoke during soldering, Transferring materials such as pellets or fine particles
• Product Number Check

• Can increase factory air by a maximum of 200%, Power supply not required
• It is possible to get a maximum of double the existing pressure by connecting the air to a factory line.
• VBA11A: maximum 4 times
• Space-saving type that directly connects air tanks and booster regulators

Set pressure (MPa)

• VBA1A0.2 to 2.0
• VBA2A0.2 to 1.0
• VBA4A0.2 to 1.0
• VBA43A0.2 to 1.6

• Collects the leakage of expensive cutting and grinding oil
• Eliminates the need to collect the leaked liquids by hand
• It is possible to use the equipped pump. A special driving force is not required.

• Used when the piping distance between the instrumentation and operational area is long, or when the operational area has a large capacity
• Can help accelerate actuation speed considerably