Pilot operated seat type valves.Solenoid unloading, remote control, low pressure over-ride , high flow handling are the main features.Available in both subplate mounting & threaded type.

Two stage spool type relief vave.Low pressure over-ride due to larger flow area.Available in hand knob & set screw with lock nut for pressure regulation.Valves with internal drain can be converted into external drain.

These seat type valves allow free flow in one direction and offer leak free closure in opposite direction. Available as inline mounting, subplate mounting as per factory and ISO standards.

Seat type valves with internal drain. Threaded or subplate type mounting construction. Available with two piston sizes.

Seat type modular are meant for bypassing Reducing valves, Pressure control valves. Free flow is either from port A to B or from port B to A depending upon the model and leak-free closure in opposite direction. Interface conforming to ISO 5781, DIN 24340 or IS 10187 with four cracking pressures : 0.5, 1.5, 3 and 5 bar

These modular valves are available with pilot operated check facility either on A, B or both A and B ports. The interface conforming to ISO4401-AB-03-04-A, IS10187, DIN24340. To ensure proper closure of both valve poppets, both user connections should be unloaded when the control valve is in neutral by connecting with the return line.

Logic Cartridge Valves are used to control oil pressure, flow or direction and are designed for insertion into cavities machined as per DIN 24342, ISO7368. These cartridges are available in two area ratios, four cracking pressures and six poppet styles. The covers are available for different functions like directional control, pressure control, unloading, flow control etc.

Designed specially for multistation Directional Control Valves, CETOP-RP35H size3. Number of stations vary from 2 to maximum 10

Direct acting with guided cuhioned poppet.Available in cartridge, subplate & threaded type.

Two stage poppet type Relief cum unloading valve with solenoid unloading as an optional feature. Available in three standard sizes 10, 20 and 30

Hydraulically cushioned valves used for sequencing, relieving, unloading, or counter-balancing applications.

Direct acting spool type pressure sequence valve.Four different models are, Internal pilot, Internal drain, Internal pilot, external drain, External pilot, Internal drain, External pilot, external drain. Four pressure ratings 25, 50, 100 & 200 bar. For reverse free flow optional check valve can be supplied as a stackable module. Presssure regulation is by hand knob or set screw with lock nut.

Counter balance are seat type valves which offer free flow in one direction & leak free closure in opposite direction upto pre determined pressure.This pre determined pressure can be regulated within its maximum specified range.

Completely encapsulated control mechanism for protection against dirt. Five chamber design. Flexibility in rotating the operating mechanism by 90 x 4. Wide variety of spool types with spring centered, spring offset & detent arrangements.

Pilot operated directional control valves are hydraulically operated spool type valves.These valves control the start, stop & the direction of the fluid flow.Available in spring offset and spring centered.

Available in spring centered, spring offset, interface conforms to National and International standards Minimum pilot pressure is 5 bar.

Designed for single acting cylinders which are supposed to hold pressure. Ensures smooth decompression prior to return of cylinder ram.Large return of oil passages to reduce pressure drops, allowing rams to return under low external forces.Valves can be connected in series for independent single acting cylinder operations.

Designed for single acting cylinders which are supposed to hold pressure. Ensures smooth decompression prior to return of cylinder ram.Large return of oil passages to reduce pressure drops, allowing rams to return under low external forces.Valves can be connected in series for independent single acting cylinder operations.

A lever operated rotary type directional control valve is generally used for high pressure applications. It works on the shear seal principle which gives good sealing and zero leakage. These valves are used where leak-free closure is required.

Pressure compensated, check valve option for reverse free flow, hand knob for pressure regulation with thumb screw provision for retaining valve setting.Stroke limiter provision available as an option.

Double Throttle cum check, non pressure compensated, modular construction. Can be used as Metering-in or Metering-out devices.